In this study the electrical and mechanical properties of microfibrillar polypropylene (PP)/polyamide6 (PA6) blend filled with super conductive carbon black (CB) have been investigated. In situ microfibrillar PP/PA6 composites filled with CB are produced using a single screw extruder equipped with a spinneret. Glycidyl methacrylate (GMA) grafted polypropylene (PP-g-GMA) is used as the compatibilizer. To investigate the effects of extensional flow on the microstructure, electrical and mechanical properties, three adaptors with various convergence angles were designed, prepared and applied between the extruder and the spinneret. To optimize the effects of processing and material parameters on the electrical and mechanical properties, the Taguchi method of experimental design is used. Material and processing factors which are studied include: concentration of PA6, compatibilizer level, CB concentration, drawing speed of melt spinning line, adaptor angle, order of mixing and temperature profile along the extruder. The results show an increase in DC conductivity of up to 1011 times in comparison with pure PA6, by increasing the concentration of CB, drawing speed, adaptor angle and optimizing other parameters. By optimizing processing and material factors studied here, strength of microfibrillar structured composites is increased of up to 80% in comparison to pure PP. 相似文献
In Classical Bayesian approach, estimation of lifetime data usually is dealing with precise information. However, in real
world, some informations about an underlying system might be imprecise and represented in the form of vague quantities. In
these situations, we need to generalize classical methods to vague environment for studying and analyzing the systems of interest.
In this paper, we propose the Bayesian estimation of failure rate and mean time to failure based on vague set theory in the
case of complete and censored data sets. To employ the Bayesian approach, model parameters are assumed to be vague random
variables with vague prior distributions. This approach will be used to induce the vague Bayes estimate of failure rate and
mean time to failure by introducing and applying a theorem called “Resolution Identity” for vague sets. In order to evaluate
the membership degrees of vague Bayesian estimate for these quantities, a computational procedure is investigated. In the
proposed method, the original problem is transformed into a nonlinear programming problem which is then divided into eight
subproblems to simplifying computations. 相似文献
The ability to handle very large amounts of image data is important for image analysis, indexing and retrieval applications. Sadly, in the literature, scalability aspects are often ignored or glanced over, especially with respect to the intricacies of actual implementation details. In this paper we present a case-study showing how a standard bag-of-visual-words image indexing pipeline can be scaled across a distributed cluster of machines. In order to achieve scalability, we investigate the optimal combination of hybridisations of the MapReduce distributed computational framework which allows the components of the analysis and indexing pipeline to be effectively mapped and run on modern server hardware. We then demonstrate the scalability of the approach practically with a set of image analysis and indexing tools built on top of the Apache Hadoop MapReduce framework. The tools used for our experiments are freely available as open-source software, and the paper fully describes the nuances of their implementation. 相似文献
In this paper, a novel approach is proposed to design a robust fault detection observer for uncertain linear time delay systems. The system is composed of both norm‐bounded uncertainties and exogenous signals (noise, disturbance, and fault) which are considered to be unknown. The main contribution of this paper is to present unknown input observer (UIO)‐based fault detection system which shows the maximum sensitivity to fault signals and the minimum sensitivity to other signals. Since the system contains uncertainty terms, an H∞ model‐matching approach is used in design procedure. The reference residual signal generator system is designed so that the fault signal has maximum sensitivity while the exogenous signals have minimum sensitivity on the residual signal. Then, the fault detection system is designed by minimizing the estimation error between the reference residual signal and the UIO residual signal in the sense of H∞ norm. A sufficient condition for the existence of such a filter is exploited in terms of certain linear matrix inequalities (LMIs). Application of the proposed method in a numerical example and an engineering process are simulated to demonstrate the effectiveness of the proposed algorithm. Simulation results show the validity of the proposed approach to detect the occurrence of faults in the presence of modeling errors, disturbances, and noise. 相似文献
ABSTRACT Cadmium as a highly toxic metal is released into the environment through paper production, metal processing, phosphate fertilizers, insecticides, and treatment of wastewater. Cadmium also inhibits the body activities and is very toxic for kidney and other organisms. In the current study, zinc-based metal–organic framework, zeolitic imidazolate framework (ZIF)-8, was synthesized and modified by dimethylethylenediamine (ZIF-8-mmen) for the removal of cadmium. To optimize the experiments, response surface methodology was applied with three variables including pH, adsorbent dosage, and contact time using central composite design. The optimum conditions for pH, dosage, and time were 2, 0.1 g, and 89 min, respectively, with removal efficiency of 85.38%. The Langmuir isotherm (qm = 1000 mg/g) indicates the monolayer adsorption. The kinetic studies reveal that the Lagergren model was predominant and cadmium was not chemisorbed. Thermodynamic parameters show spontaneous, endothermic, and physisorption processes. 相似文献
Mapping vulnerability to Saltwater Intrusion (SWI) in coastal aquifers is studied in this paper using the GALDIT framework but with a novelty of transforming the concept of vulnerability indexing to risk indexing. GALDIT is the acronym of 6 data layers, which are put consensually together to invoke a sense of vulnerability to the intrusion of saltwater against aquifers with freshwater. It is a scoring system of prescribed rates to account for local variations; and prescribed weights to account for relative importance of each data layer but these suffer from subjectivity. Another novelty of the paper is to use fuzzy logic to learn rate values and catastrophe theory to learn weight values and these together are implemented as a scheme and hence Fuzzy-Catastrophe Scheme (FCS). The GALDIT data layers are divided into two groups of Passive Vulnerability Indices (PVI) and Active Vulnerability Indices (AVI), where their sum is Total Vulnerability Index (TVI) and equivalent to GALDIT. Two additional data layers (Pumping and Water table decline) are also introduced to serve as Risk Actuation Index (RAI). The product of TVI and RAI yields Risk Indices. The paper applies these new concepts to a study area, subject to groundwater decline and a possible saltwater intrusion problem. The results provide a proof-of-concept for PVI, AVI, RAI and RI by studying their correlation with groundwater quality samples using the fraction of saltwater (fsea), Groundwater Quality Indices (GQI) and Piper diagram. Significant correlations between the appropriate values are found and these provide a new insight for the study area.
In this work, the transport properties of gaseous penetrant through several dense glassy polymeric membranes are studied. The nonequilibrium lattice fluid (NELF) in conjunction with the modified Fick's law and dual mode sorption model was used to simulate the gas transport in glassy polymeric membranes. The approach is based on the sorption, diffusion, in which solubility is calculated based on the NELF model, and diffusion coefficient is obtained from the product thermodynamic coefficient and molecular mobility. The governing equation is solved by the finite element method using COMSOL multi-physics software. The developed model for gas permeability of glassy polymeric membrane can be applied in a wide range of pressure and temperature. The comparison of the calculated permeability and solubility of gasses with the experimental data represented the ability of the developed model. Increasing feed gas temperature increases the gas permeability, while this variation leads to lower gas solubility in the glassy polymeric membranes. The effect of feed temperature and pressure on permeability and solubility is investigated, and the experimental data from literature are described by the developed model. A good prediction of the experimental data can be observed over the considered condition. 相似文献
Summary
O-glycosides were synthesized by electrochemical oxidation of phenylS-glycosides in the presence of primary alcohols in acetonitrile. Similarly, a -linked disaccharide was obtained selectively by oxidation of phenylS-glycoside in the presence of a sugar alcohol. Electrosyntheses were performed under controlled potential or at constant current, in an undivided cell, on a large scale. 1 to 60 g of phenylS-glycosides in 0.5 to 1 dm3 of acetonitrile were converted with chemical yields in the range of 65–75%. 相似文献
Obtaining a highly homogeneous magnetic field is desired for field-controlled applications. For example, the resolution of magnetic analysis methods can be improved by generating a stronger and more homogeneous field over the region of interest (ROI). A set of 3D-printed passive shims is fabricated using additive manufacturing to improve the magnetic field homogeneity of a Halbach magnet assembly. The feedstock is a custom acrylonitrile butadiene styrene (ABS)-hard magnet composite filament filled with 60% wt. isotropic NdFeB. Additionally, a method for investigating the remanence is developed and validated. The result reveals a good agreement between the new method and existing measurement techniques for the remanence of permanent magnets. It is also shown that the additive manufacturing procedure has negligible effects on the magnetic properties. Performing a parametric study over a rectangular ROI, an optimized shim configuration is achieved. In the optimized and 3D-printed configuration, the average norm of the magnetic flux density, Bnorm, is increased by 13% and, more importantly, a 43% increase in the magnetic uniformity is obtained. These results highlight the great potential of freeform manufacturing, namely, additive manufacturing, to tailor the properties of magnet structures. 相似文献
Definition of the problem The development of personalized medicine is currently a popular topic. Particularly the personalized pharmacotherapy is a matter of relative importance due to pharmacological and molecular–genetic developments. For this reason it is required to examine the implications of personalized pharmacotherapy to statutory health insurance and health care of patients. Arguments In this context the question of orphanization arises: If medical drugs of personalized medicine could be regularly indicated as orphan drugs, i.e., as drugs to medicate orphan diseases, it would not be necessary according to the “Arzneimittelneuordnungsgesetz” (AMNOG) to prove an auxiliary value within the assessment of the “Gemeinsamer Bundesausschuss” (GBA). Crucial to the drug’s indication as an orphan drug is among other things the rate of prevalence of the patient group, whose disease should be medicated with the drug. In this connection, there is importance attached to the stratification of patient groups within personalized medicine. Conclusion An orphanization causes consequences in terms of prices to the statutory health insurance due to the lack of knowledge about an auxiliary value. For patients, the implications must be considered in a more differentiated manner. 相似文献