Ultra low power frequency divider for 2.45 GHz ZigBee frequency synthesizer

An ultra low power CMOS frequency divider whose modulus can be varied from 481 to 496 is presented. It has been customized to be used in 2.45 GHz Integer-N PLL frequency synthesizers utilized in ZigBee standard. Its based on swallow divider that replaces the swallow counter by a simple digital circuit in order to reduce power consumption and design complexity. Also a low power and high speed divide-by-7/8 is presented. Post layout simulation results exhibit 420 μW power consumption for 4 bit frequency divider in 2.45 GHz ISM frequency band that proves 40 % reduction compared to same previous works. All of the circuits have been designed in 0.18 μm TSMC CMOS technology with a single 1.8 V DC voltage supply.     

Design of efficient power amplifier for low power transmitters

This paper presents a fully integrated, low transmit-power and high-efficiency 2.4 GHz class-E power amplifier (PA) in TSMC 0.18 μm CMOS process for low-power transmitters such as wireless sensor networks (WSN). In this paper, a new output load has been proposed. Also, analytical design equations have been included to design an efficient low power circuit. This PA, employs the pad capacitance and bond-wire inductance of the output node, for satisfying class-E zero-voltage switching (ZVS) condition and matching the antenna’s 50 Ω resistance. By using bond-wire inductance instead of inductor in the output filter, smaller chip size and higher efficiency has been achieved compared to other works for low transmit-power applications. Also, the effectiveness of bulk-drive technique on faster switching and increasing efficiency have been evaluated. It has been proved that this technique leads to increase the efficiency of switching PAs. This PA delivers a range of output power from 2.7 to 7.2 dBm with a supply voltage range from 500 to 850 mV while achieving overall power efficiency range of 57.3–60.7%.     

Design of a 12-bit high-speed CMOS D/A converter using a new 3D digital decoder structure useful for wireless transmitter applications

In this paper a 12-bit Nyquist current-steering digital-to-analog converter (DAC) is implemented using TSMC 0.35 μm standard CMOS process technology. The proposed DAC is an essential part in baseband section of wireless transmitter circuits. Using oversampling ratio (OSR) for it leads to avoid use of an active analog reconstruction filter. The optimum segmentation (75%) has been used to get the best DNL and reduce glitch energy. This segmentation ratio guarantees the monotonicity. Higher performance is achieved using a new 3D thermometer decoding method which reduces the area, power consumption and the number of control signals of the digital section. Using two digital channels in parallel, helps reach 1 GHz sampling frequency. Simulations indicate that the DAC has an accuracy better than 10.7-bit for upcoming higher data rate standards (IEEE 802.16 and 802.11n), and a spurious-free-dynamic-range (SFDR) higher than 64 dB in whole Nyquist frequency band. The post layout four corner Monte-Carlo simulated INL is better than 0.74 LSB while simulated DNL is better than 0.49 LSB. The analog voltage supply is 3.3 V while the digital part of the chip operates with only 2.4 V. Total power consumption in Nyquist rate measurement is 144.9 mW. Active area of chip is 1.37 mm².     

The Effect of Non Ionic Surfactants Containing Triazole, Thiadiazole and Oxadiazole as Inhibitors of the Corrosion of Carbon Steel in 1M Hydrochloric Acid

In the present investigation novel nonionic surfactants were synthesized, characterized and tested as inhibitors of the corrosion of carbon steel in 1M HCl solution. The inhibition action of these surfactants was studied by weight loss, galvanostatic polarization and electrochemical impedance spectroscopy. The adsorption of the inhibitors was well described by the Langmuir adsorption isotherm and the adsorption isotherm parameters were determined at different temperatures. The inhibition efficiency was found to rise when increasing the concentration of these compounds and decreasing the temperature. The effect of temperature on the inhibition efficiency of the corrosion process was studied and the values of some activated thermodynamic parameters were calculated to elaborate the mechanism of inhibition. The synthesized nonionic surfactants exhibit good surface and antimicrobial properties.     

Synthesis and Estimation of Some Surface-Active Compounds Derived from Fused Pyridine as Corrosion Inhibitors for Aluminum in Hydrochloric Acid Solutions

Protection of Metals and Physical Chemistry of Surfaces - Three nonionic surfactants molecules (NS) derived from a fused pyridine characterized by IR and 1HNMR spectra were synthesized and examined...     

Thermal,Microstructural, Magnetic,and Optical Studies for La0.7M0.3CoO3 (M = Ca,Pb) Cobaltites for Potential Magneto-optical Applications

Journal of Superconductivity and Novel Magnetism - In this work, the thermal, microstructural, magnetic, and optical studies for both La0.7Ca0.3CoO3 (LCCO) and La0.7Pb0.3CoO3 (LPCO) cobaltite...     

Study of Magnetic Entropy Change in Nd<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.98</Subscript>Fe<Subscript>0.02</Subscript>O<Subscript>3</Subscript> by Means of Theoretical Models

Magnetic entropy change (?ΔS _M ) of Nd_0.67 Ba_0.33Mn_0.98Fe_0.02O₃ perovskite have been analyzed by means of theoretical models. An excellent agreement has been found between the (ΔS_M) values estimated by Landau theory and those obtained using the classical Maxwell relation. In order to estimate the spontaneous magnetization M _{s pont}(T), we used the mean-field theory to analyses the (ΔS_M) vs. M ² data. The obtained M _{s pont}(T) values are in good agreement with those found from the classical extrapolation from the Arrott plots(H/M vs. M ²), confirming that the magnetic entropy is a valid approach to estimate the spontaneous magnetization in our system. At a relatively low magnetic field, a phenomenological model has been used to estimate the values of the magnetic entropy change. The results are in good agreement with those obtained from the experimental data using Maxwell relation.     

Optical properties and electrical conductivity studies of copper selenide nanoparticle

In this work, the optical properties were studied in the UV-VIS range for copper selenide nanoparticle prepared at 160, 170 and 200 °C by solvothermal route using ethylenediamine as a solvent. Sharp absorption bands were observed at shorter wavelength due to the confinement of electrons and holes in low dimensional system producing excitonic and Coulombic attraction. The binding energy and the optical band gap were determined and the two values were found to decrease with increasing temperature and decreasing grain size. DC electrical conductivities were measured with temperature and the activation energy was calculated. The obtained data indicated that, the prepared samples behave as a semiconductor material.     

Multi-objective Pareto and GAs nonlinear optimization approach for flyback transformer

Electrical Engineering - Design and optimization of high-frequency inductive components is a complex task because of the huge number of variables to manipulate, the strong interdependence and the...