Ceramic Composites Fabricated by Selective Laser Sintering

Selective laser sintering (SLS) uses a computer controlled laser beam to create objects directly from the CAD data without part-specific tooling. In this paper, the effect of material and processing parameters on the microstructure and mechanical properties of an alumina/aluminum phosphate composite fabricated by SLS is described. The precursor material is a blend of alumina and ammonium phosphate powder. This paper deals primarily with the effect of alumina particle size and material composition on the strength of the composite. A constitutive equation is also proposed to relate the mechanical properties of the composite to its microstructural characteristics.     

Mixed waste ferrite as a novel sorbent for carbon dioxide derived from flue gases

Ferrite is a potential sorbent for flue gases such as CO₂, H₂S and SO₂. This paper discusses the adsorption and decomposition of CO₂ into carbon by hydrogen-activated waste ferrites prepared from Berkeley Pit acid mine water (Butte, MT). The decomposition effectiveness of these waste ferrites was studied at 300 °C and compared with the synthetic magnetite obtained from ferrous sulfate solution in our laboratory. The decomposition was measured by two methods: indirectly by measuring the adsorption rate of CO₂ and directly by analysing the carbon deposited on the samples. The results indicated that the mixed waste ferrite had good affinity for the adsorption and decomposition. The CO₂ decomposition data of both sorbents fitted the first-order reaction kinetics. Even though the surface area of the magnetite was higher than that of waste ferrite, the CO₂ decomposition rate of the waste ferrite was estimated to be 2.5 times higher than that of magnetite under identical conditions. The carbon analysis deposited on the sample indicated that the CO₂ was 100% decomposed into carbon and other carbon/hydrogen compounds by the waste ferrite, whereas the conversion was 43% by the magnetite. In terms of specific adsorption of carbon, ferrite was three to five times more efficient than magnetite.     

High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Robot manipulator kinematic compensation using a generalized jacobian formulation

The kinematic error compensation of robot manipulators is at present being attempted by improving the precision of the nominal robot kinematic parameters. This paper addresses the problem of kinematic compensation using a new mathematical joint model proposed to account for shortcomings in existing methods. The corrected manipulator transformation is formulated in terms of “generalized Jacobians”: relating differential errors at the joints to the differential change in the manipulator transformation. The details of application are discussed for a particular industrial manipulator.     

A lower carbon footprint process for production of metals from their oxide sources

This paper will describe the solid oxide membrane (SOM) process as it applies to the energy-efficient and environmentally sound production of magnesium from magnesium oxide. Also, it will describe the challenges encountered while using this process for the production of transition metals like titanium from its higher oxides. Finally, a novel magnesiothermic SOM process will be proposed that can enable production of transition metals from its higher oxides.     

A micromachined electrochemical sensor for free chlorine monitoring in drinking water.

In this work, we designed, fabricated and tested a disposable, flow-through amperometric sensor for free chlorine determination in water. The sensor is based on the principle of an electrochemical cell. The substrate, as well as the top microfluidic layer, is made up of a polymer material. The advantages include; (a) disposability from low cost; (b) stable operation range from three-electrode design; (c) fluidic interconnections that provide on line testing capabilities; and (d) transparent substrate which provides for future integration of on-chip optics. The sensor showed a good response and linearity in the chlorine concentration ranging from 0.3 to 1.6 ppm, which applies to common chlorination process for drinking water purification.     

A graded diameter and oriented nanorod–thin film structure for solar cell application: a device proposal

This paper presents a device proposal based on a junction between an absorbing semiconductor nanorod structure and another window semiconductor layer for solar cell application. The possibility of band gap tuning by varying the diameter of the nanorods along the length, higher absorption coefficient at nanodimensions, the presence of a strong electrical field at the nanorod-window semiconductor nanojunctions and the carrier confinement in lateral direction are expected to result in enhanced absorption and collection efficiency in the proposed device. Process steps, feasibility, technological tasks needed for the realization of the proposed structure and the novelty of the present structure in comparison to the already reported nanostructured solar cells are also discussed.     

Potential bioreductively activated hypoxia probes and post-irradiation radiosensitizers related to NITP

NITP (1) is an effective marker of hypoxia in tumours for both microscopy and cell sorting studies and, additionally, the compound shows post-irradiation sensitization, probably by inhibition of repair of radiation damage to DNA. However, NITP does not have the substitution pattern which the immunochemical reagents are raised to recognize and the compound has very low solubility in water. We report the synthesis of an isomer (13) of NITP which has the desirable substitution pattern and is also soluble in very weak aqueous base. The successful synthesis of 13 uses a nitrosation and cyclization of a substituted uracil (16), but earlier approaches from 5 and 12 yielded the pyridoxanthine derivative 6. The preparative use of nitro group displacement reactions from 8-nitrocaffeine is shown to be a useful entry to a range of 8-substituted caffeines and is utilized to obtain two derivatives of NITP which carry aliphatic amine chains, i.e. 34 and 35.