Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

Fold and flexibility: what can proteins' mechanical properties tell us about their folding nucleus?

The determination of a protein''s folding nucleus, i.e. a set of native contacts playing an important role during its folding process, remains an elusive yet essential problem in biochemistry. In this work, we investigate the mechanical properties of 70 protein structures belonging to 14 protein families presenting various folds using coarse-grain Brownian dynamics simulations. The resulting rigidity profiles combined with multiple sequence alignments show that a limited set of rigid residues, which we call the consensus nucleus, occupy conserved positions along the protein sequence. These residues'' side chains form a tight interaction network within the protein''s core, thus making our consensus nuclei potential folding nuclei. A review of experimental and theoretical literature shows that most (above 80%) of these residues were indeed identified as folding nucleus member in earlier studies.     

Advanced Surface of Fibrous Activated Carbon Immobilized with FeO/TiO2 for Photocatalytic Evolution of Hydrogen under Visible Light

FeO-doped TiO₂ nanoparticle photocatalysts were immobilized onto the surface of fibrous activated carbon (ACF) via a sol-gel process. As an adsorbent and photocatalyst, FeO-TiO₂ on immobilized ACFs (FeO-TiO₂/ACF) greatly improved the photocatalysis rate of hydrogen production as compared with pure TiO₂ and ACF-TiO₂ under UV irradiation and visible light. The addition of ACFs surface significantly reduced the photogenerated pairs of electrons-hole recombination, thereby promoting the photocatalysis action of doped photo-metal oxides of FeO-TiO₂. Co-doping of FeO onto the lattice of the TiO₂ approach can improve the absorption activity of visible light through photo-metal oxide of TiO₂ and further enhance hydrogen production under visible light. The photocatalytic fabrics (FeO-TiO₂/ACF) were effortlessly split out from the experimental solution for re-utilization and exhibited high stability even after five complete regeneration cycles.     

Transgenerational effects of the holocaust: Externalization of aggression in second generation of holocaust survivors.

Examined the psychological characteristics of the children of holocaust survivors. 38 males and females in their late 20's were interviewed; the parents of 19 Ss were holocaust survivors, and the parents of the other 19 Ss were in Israel during World War II and did not suffer directly. It was hypothesized that reactions of the children of the holocaust survivors would include guilt rather than external aggression and a tendency not to externalize aggressive impulses in reaction to frustrating events. The Ss' reactions to a projective test were analyzed, and the responses provide support for the major hypothesis. Results show that sons and daughters of holocaust survivors were less likely to externalize aggression than were those in a control group. This finding is supported by the content analysis of the structured interview conducted with the Ss in both groups. (20 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Development of Bi(Pb)-2223/Ag pancake-shaped and solenoidal coils

High temperature superconducting (HTSC) multifilamentary (MT) Bi(Pb)-2223/Ag tapes with reproducible critical current density of between 15000 and 20000 A/cm² at 77 K in self field have been achieved using the standard flat-rolling method as the intermediate deformation between sintering periods. Long lengths of Bi(Pb)-2223/Ag MT tapes up to 43 m prepared by the conventional method of powder-in-tube (PIT) have been successfully produced on a laboratory scale. Several coils have been fabricated from sections of the long length tape, using the co-wound wind-and-react (W&R) procedure for the pancake-shaped and the singly-wound W&R as well as R&W procedure for the solenoidal coils. A novel W&R solenoidal coil (reaching ~973 ampere-turns) wound on an alumina ceramic tube generates a DC field of ~19 mT at 77 K and has been fabricated together with five pancake-shaped coils, each generating an average of ~5 mT at 77 K. These are destined for magnet construction with a possible combined calculated field of ~0.04 T at 77 K (with liquid nitrogen as a coolant)     

DC isolation and RF dissipation loss of coplanar waveguide on GaAs multi conductive Layers bombarded by H/sup +/ and Fe/sup +/ ions

This letter explores the dc isolation and radio frequency (RF) dissipation loss of coplanar waveguide (CPW) lines of H/sup +/ and Fe/sup +/ ion bombarded GaAs multi conductive epitaxial layers. It is demonstrated that although a sheet resistivity as high as 10/sup 8/ /spl Omega/sq has been achieved by ion bombardment, showing excellent dc isolation, the RF dissipation loss of gold metallized CPW lines on the bombarded multi conductive epitaxial layers are higher than that on a semi-insulating GaAs substrate, especially at higher frequencies (0.5 dB/cm higher at 50 GHz). This is probably caused by deep level trappings due to the ion bombardment.     

Water absorption properties of phosphate glass fiber‐reinforced poly‐ϵ‐caprolactone composites for craniofacial bone repair

The moisture uptake of polymers and composites has increasing significance where these materials are specified for invasive, long‐term medical applications. Here we analyze mass gain and the ensuing degradation mechanisms in phosphate glass fiber reinforced poly‐?‐caprolactone laminates. Specimens were manufactured using in situ polymerization of ?‐caprolactone around a bed of phosphate glass fibers. The latter were sized with 3‐aminopropyltriethoxysilane to control the rate of modulus degradation. Fiber content was the main variable in the study, and it was found that the moisture diffusion coefficient increased significantly with increasing fiber volume fraction. Diffusion, plasticization, and leaching of constituents appear to be the dominant aspects of the process over these short‐term tests. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Conductor design with high-Tc superconducting Bi(Pb)—2223/Ag multifilamentary tapes

With high upper critical fields, high temperature superconductors (HTSC) have been recognised as candidate materials for coil and magnet applications. High field devices, at one time or another, when operated close to their rated limits are often faced with instability problems which normally are electrical, magnetic or mechanical in nature. The determination of stability parameters, therefore, is of interest to the conductor designer which very much assists in the processing aspect of long length production of wires and tapes. Due to the morphology of the superconductor most HTSC devices made with Bi(Pb)—2223 precursor exist in tape form. Here the determination of stability parameters (for flux-jump and cryogenic stability) for multifilamentary Bi(Pb)—2223/Ag tapes are presented. Processing parameters such as intermediate deformation and filling factors have been found to play a crucial role, not only on the critical current density of the tapes but on the stability aspect in conductor design as well.