The prevalence of preferential nasal breathing in adults

The prevalence of preferential nasal breathing was studied in an awake adult population. One hundred and ninety-four people consented to gentle manual compression of the nostrils. They were advised to 'breathe in and out', but no further information regarding breathing was given to avoid influencing the patient. One hundred and eighty patients (92.8%) commenced immediate regular relaxed breathing. Fourteen patients (7.2%) had difficulty with oral breathing which ranged from irregular mouth breathing associated with distress to no spontaneous respiration. The prevalence of preferential nasal breathing was strongly associated with increasing age (chi 2 for trend, P = 0.007). In addition, a weakly significant association was demonstrated between a history of asthma and this phenomenon (P = 0.047). These findings suggest a tendency for the elderly person to revert to the infant pattern of obligate nasal breathing. Physicians should be aware of this possibility in the elderly patient, especially prior to any procedure which may induce nasal obstruction.     

Site and parameters of microstimulation: evidence for independent effects on the properties of saccades evoked from the primate superior colliculus

1. Microstimulation is used to investigate how activity in the superior colliculus (SC) contributes to determining the properties of primate saccadic eye movements. The site of collicular stimulation, the duration of the stimulation train, and the frequency of the stimulation train are each varied to examine the relative contributions of the locus, duration, and level of collicular activity to determining saccade amplitude, direction, duration, and velocity. 2. For any given site of stimulation, a relationship between movement amplitude and train duration can be demonstrated. Movement amplitude is a monotonically increasing, but saturating, function of increasing train duration. The size of the largest movement is dictated by the site of stimulation. Within the range over which amplitude can be modulated, movement offset is linked to the offset of the stimulation train. As a result, each decrement or increment in train duration produces a corresponding decrement or increment in movement duration. 3. The peak velocity of an evoked movement is influenced by the frequency of stimulation; a higher frequency of stimulation produces a movement of higher velocity. 4. The effects of train duration and frequency can be traded to produce movements that have comparable amplitudes but different dynamic characteristics; high-velocity movements of short duration and low-velocity movements of long duration can be produced by stimulating with high-frequency, short-duration, and low-frequency, long-duration trains, respectively. Across stimulation frequencies, the amplitude of an evoked movement is best related to the total number of pulses in the stimulation train. 5. Because it is possible to compensate for reduced velocity by increasing the duration of the stimulation train, the same site-specific maximum amplitude can be attained with different frequencies of stimulation. 6. Small, but significant, changes in movement direction occur as a result of varying train duration or train frequency. 7. The latency to movement onset (i.e., interval from stimulation onset to movement onset) depends upon the frequency of stimulation. A higher frequency of stimulation produces a movement of shorter latency. 8. These data demonstrate that both the site of stimulation and the parameters of stimulation contribute to determining the properties of a movement evoked from the primate SC. In doing so, they contradict the results of early microstimulation studies that suggest that the properties of eye movements evoked from the primate SC are determined solely by the site of stimulation. The findings conflict with the traditional view of collicular function that suggests that the collicular motor representation is purely anatomic. Rather, these data support a revised view whereby the locus, duration, and level of collicular activity contribute to determining the properties of a primate saccadic eye movement. According to this view, independent information relating to desired displacement and saccade velocity are extracted from the spatiotemporal profile of collicular activity.     

Detection of optic disc changes with Glaucoma-Scope probability maps

Before use of cardiovascular surgical techniques and procedures in humans, many experiments, e.g., hypothermic circulatory arrest and cardiopulmonary bypass using the heart-lung machine, have been performed in the dog. As a consequence experimental canine cardiovascular surgery is highly developed. This has not resulted in the routine performance of open heart surgery in veterinary medicine, probably because of the high costs. Cardiovascular surgery in the dog is generally limited to interventions not depending on hypothermic circulatory arrest or cardiopulmonary bypass. The clinical cardiovascular surgery in dogs can be divided into routine and more specialized interventions. The first category includes correction of peritoneopericardial diaphragmatic hernia, pericardial fenestration in dogs with pericardial effusion, treatment of persistent right aortic arch, and patent ductus closure. The specialized interventions include dilation of pulmonic and aortic stenoses and pacemaker implantation. The diagnosis and surgical treatment of such diseases is described. New developments in cardiovascular surgical treatment that can be expected include catheter techniques for occlusion of shunts and dilations using balloons, because the financial costs of these procedures are not prohibitive.     

Austenite stability in Fe–Mn–Si-based shape memory alloys

The stability of austenite in a number of Fe–Mn–Si-based shape memory alloys has been investigated. It was found that a grain boundary precipitate of BCC structure is formed over a wide range of alloy compositions and heat treatment temperatures. This grain boundary phase has been identified as the chi (χ) phase. Although up to 3 vol.% of the grain boundary precipitate was generated by isothermal aging in the range 500–800 °C, it was found not to markedly affect the mechanical properties or the shape memory effect. Nano-indentation indicated that the hardness and strength of the parent and precipitate phase are very similar, as are their compositions.     

Phase separation in segmented polyurethanes derived from mixtures of polyether polyols with different functionality

A series of segmented polyurethanes containing 60 wt° of hard segments (HS) was prepared from MDI (4,4-diphenylmethane diisocyanate) ethylene glycol and mixtures of a polyoxyethylene end-capped polyoxypropylene triol and a polyoxyethylene end-capped polyoxypropylene diol. The effects of the content of polyether diol in polyether polyols on phase separation and properties was investigated by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC) and investigation of tensile properties. The DSC and DMA results indicate that the polyurethane derived from only polyether triol exhibits obvious phase separation and that the HS is immiscible with the SS, but that the HS is compatible with the HS for the polyurethane derived from polyether diol. As the content of polyether diol increases, the compatibility between HS and SS increases. As the content of polyether diol increases, the tensile strength. elongation. toughness and tear resistance of the polyurethanes increases. but their moduli decrease. The modulus-temperature dependence in the temperature region of –30 to 65 °C increases as the polyether diol content increases.     

The Effect of Mn-rich Precipitates on the Strength of AZ31 Extrudates

The commercial magnesium alloy AZ31 has been subjected to a range of solution treatment regimes. These have then been extruded and their microstructure, texture, and precipitate populations characterized along with their mechanical properties. During the solution treatment, Mn-enriched particles develop and these remain largely unchanged throughout subsequent processing steps. A direct link between grain size and texture has been found, with coarser-grained specimens showing sharper textures. VPSC modeling has been used to quantify the effect of texture on the tensile yield strength, and it has been found that sharper textures have larger tensile yield strengths. Since coarser grain sizes have reduced Hall–Petch hardening, but have an additional texture-strengthening component, a region on the Hall–Petch plot for tension has been identified in which there is an insensitivity of strength to grain size. This has been quantitatively modeled and a texture-modified Hall–Petch plot for tension has been developed. The Mn-rich particles have also been shown to provide precipitate strengthening to the alloy of up to 40 MPa. The compressive behavior was clearer, with the compressive yield strength being directly correlated to grain size and unaffected by texture or precipitation hardening.     

Effects of soft-segment prepolymer functionality on the thermal and mechanical properties of RIM copolymers

Segmented copolyureas (PUr) and copoly(urethane–urea)s (PUU) comprising 50% by weight of polyurea hard segments (HS) and polyether soft segment (SS) with different functionalities, have been formed by reaction injection moulding (RIM). The HS were formed from 4,4′-diphenylmethane diisocyanate reacted with mixed isomers of 3,5-diethyltoluene diamine. The nominal functionality of the SS prepolymers used (either amino- or hydroxyl-functionalised polyoxypropylenes with a constant molar mass per functional group of ∼ 2000 g mol⁻¹) was systematically increased from 2 to 4. RIM materials were characterised using dynamic mechanical thermal analysis, differential scanning calorimetry, tensile stress–strain and fracture mechanics studies. Generally, the PUr exhibited far superior thermal-mechanical properties than equivalent PUU materials but inferior fracture resistance, owing to morphological variations resulting from differences in copolymerisation behaviour. For both systems, tensile behaviour was shown to be dominated by the degree of phase separation, whereas fracture properties showed a degree of dependence on SS functionality.     

以太网供电技术的发展

面向以太网供电（PoE）的IEEE802．3af标准将以太网网络连接引向了一个全新的方向,即以10／100／1000Mbps数据速率一并输送DC功率。伴随PoE而出现的一组独特的问题和崭新的思维方式是许多拥有以太网设备设计经验的工程师过去所并不熟悉的。目前,PoE一般用于VoIP电话、无线接入点和安全摄像机。而随着PoE技术的进步,改进标准的呼声渐起,旨在造就新兴的应用。     

Inclusion of antibiotics in feed alters greenhouse gas emissions from feedlot manure during composting

In this study, the effects of dietary inclusion of antibiotics on emissions of greenhouse gases (GHG: CO₂, CH₄ and N₂O) from cattle manure during composting were investigated. Manure was collected at the end of two feeding trials in 2005 and 2006 in which feedlot cattle were assigned to one of five dietary groups: (1) Control: no antibiotics added; (2) TYL11: tylosin at 11 mg kg⁻¹ feed; (3) CTC11: chlortetracycline at 11 mg kg⁻¹ feed; (4) CTC44: chlortetracycline at 44 mg kg⁻¹ feed; and CTC44SMZ44: chlortetracycline and sulfamethazine, each at 44 mg kg⁻¹ feed. Open windrows were constructed and the rate of GHG emission was measured periodically. In both years, CO₂ surface emissions were higher (P < 0.05) for treatments CTC11 and CTC44SMZ44 than for the Control. The CO₂ emission rates in 2005 were lower (P < 0.05) than in 2006, reflecting lower total carbon (TC) content in the manure in 2005 (138 ± 2 g kg⁻¹) than in 2006 (245 ± 2 g kg⁻¹). The rate of CH₄ emission varied from 0.006 to 0.232 g C m⁻² day⁻¹. Average values from all four antibiotic treatments were similar (P > 0.05) to the Control in both years. The N₂O emission rates were higher (P > 0.05) with CTC44SMZ44 (2005), TYL11 (2006) and CTC11 (2006) than with Control. While antibiotics do alter GHG emissions from composted feedlot manure, the mechanisms responsible are not clear and warrant further investigation.     

RESTORING SALMON HABITAT FOR A CHANGING CLIMATE

An important question for salmon restoration efforts in the western USA is ‘How should habitat restoration plans be altered to accommodate climate change effects on stream flow and temperature?’ We developed a decision support process for adapting salmon recovery plans that incorporates (1) local habitat factors limiting salmon recovery, (2) scenarios of climate change effects on stream flow and temperature, (3) the ability of restoration actions to ameliorate climate change effects, and (4) the ability of restoration actions to increase habitat diversity and salmon population resilience. To facilitate the use of this decision support framework, we mapped scenarios of future stream flow and temperature in the Pacific Northwest region and reviewed literature on habitat restoration actions to determine whether they ameliorate a climate change effect or increase life history diversity and salmon resilience. Under the climate change scenarios considered here, summer low flows decrease by 35–75% west of the Cascade Mountains, maximum monthly flows increase by 10–60% across most of the region, and stream temperatures increase between 2 and 6°C by 2070–2099. On the basis of our literature review, we found that restoring floodplain connectivity, restoring stream flow regimes, and re‐aggrading incised channels are most likely to ameliorate stream flow and temperature changes and increase habitat diversity and population resilience. By contrast, most restoration actions focused on in‐stream rehabilitation are unlikely to ameliorate climate change effects. Finally, we illustrate how the decision support process can be used to evaluate whether climate change should alter the types or priority of restoration actions in a salmon habitat restoration plan. Copyright © 2012 John Wiley & Sons, Ltd.