Mixing characteristics for the single and air-water two-phase flows in miniaturized parallel multichannel-based devices

Investigation on the miniaturized parallel multichannel-based devices packed with glass beads to improve the mass exchange execution is the critical focal point of the current study. One of the essential parameters to specify the miniaturized devices' flow distribution is the residence time distribution (RTD). In the present context, the RTDs of a liquid tracer were investigated for the air-water multiphase flows (concurrent) across the multichannel-based miniaturized devices (comprising of 11 similar dimensional parallel channels). The devices were variable in height and packed with glass beads. The conductivity estimations generated the RTD curves and were addressed by the axial dispersion model (ADM). The fluid-flow rates differed within the range of 5–23 ml min⁻¹. The axial dispersion coefficients and the rate of the specific energy dispersion were investigated. The effects of pressure difference and geometry on the hydrodynamic attributes and mixing properties were well-illustrated, and the new correlations were suggested.     

Synthesis and characterization of a novel Ca-alginate-biochar composite as efficient zinc (Zn2+) adsorbent: Thermodynamics,process design,mass transfer and isotherm modeling

In this present work, Ca-alginate-biochar adsorbent has been synthesized, characterized and tested its effectiveness in the removal of aqueous phase Zn²⁺ metal. The removal efficiency was studied under various physicochemical process parameters. External mass transfer model, intraparticle diffusion model and pseudo-first-order and pseudo-second-order models were used to fit the experimental Zn²⁺ adoption kinetic results and to identify the mechanism of adsorption. The desorption studies indicate the possibilities of ion-exchange and physical–chemical adsorption of Zn^2+. The adsorption was best described by Langmuir isotherm model. Thermodynamic parameters suggested that the adsorption process becomes spontaneous, endothermic and irreversible in nature.     

Synthesis and characterization of biocompatible hydroxyapatite coated ferrite

Ferrite particles coated with biocompatible phases can be used for hyperthermia treatment of cancer. We have synthesized substituted calcium hexaferrite, which is not stable on its own but is stabilized with small substitution of La. Hexaferrite of chemical composition (CaO)_0.75(La₂0₃)_0.20(Fe₂O₃)₆ was prepared using citrate gel method. Hydroxyapatite was prepared by precipitating it from aqueous solution of Ca(NO₃)₂ and (NH₄)₂HPO₄ maintaining pH above 11. Four different methods were used for coating of hydroxyapatite on ferrite particles. SEM with EDX and X-ray diffraction analysis shows clear evidence of coating of hydroxyapatite on ferrite particles. These coated ferrite particles exhibited coercive field up to 2 kOe, which could be made useful for hysteresis heating in hyperthermia. Studies by culturing BHK-21 cells and WBC over the samples show evidence of biocompatibility. SEM micrographs and cell counts give clear indication of cell growth on the surface of the sample. Finally coated ferrite particle was implanted in Kasaulli mouse to test its biocompatibility. The magnetic properties and biocompatibility studies show that these hydroxyapatite coated ferrites could be useful for hyperthermia.     

Life expectancies of Pb-free SAC solder interconnects in electronic hardware

The transition from lead (Pb) bearing solder to Pb-free solder has arisen in response to government restrictions on the use of lead (Pb) by the European Union. As a result, electronic manufacturers have sought a material comparable to the conventional 63Sn37Pb solder that has been traditionally used to assemble electronic hardware. Based on extensive review of various solder combination, the majority of electronic manufacturers appear to be adopting a tin–silver–copper (SAC) solder as a popular Pb-free solder replacement. Significant investments have been made by many researchers to characterize the material behavior and durability of this solder system. While the exact composition of the SAC solder is still in question, it now appears that the 96.5Sn3.0Ag0.5Cu (SAC305) solder is gaining wider acceptance as the favored Pb-free replacement, for surface mount assemblies that are going to be subjected predominantly to cyclic thermal environments. This paper presents a review of our current understanding of the life expectancy of Pb-free SAC solder interconnects for electronic hardware. To this end, the paper focuses on material characterization of SAC solder, as well as its temperature cycling and vibration fatigue reliability. From this review, SAC solder interconnects are shown to be suitable for providing adequate life expectancies for temperature cycling in electronic hardware. However, it is clear that there are differences between SAC and the conventional Sn37Pb solder, that need to be understood in order to design reliable electronic hardware.     

Time dispersion in large plastic scintillation neutron detectors

Time dispersion (TD) is computed for large neutron detectors using plastic scintillators. It is shown that TD seen by the photomultiplier (PM) tube does not necessarily increase with incident neutron energy, which is a result not fully in agreement with the usual finding     

A transmit/receive IF chip set for WCDMA mobiles in 0.35 /spl mu/m CMOS

An implementation of the IF section of WCDMA mobile transceivers with a set of two chips fabricated in an inexpensive 0.35-/spl mu/m two-poly three-metal CMOS process is presented. The transmit/receive chip set integrates quadrature modulators and demodulators, wide dynamic range automatic gain control (AGC) amplifiers, with linear-in-decibel gain control, and associated circuitry. This paper describes the problems encountered and the solutions envisaged to meet stringent specifications, with process and temperature variations, thus overcoming the limitations of CMOS devices, while operating at frequencies in the range of 100 MHz-1 GHz. Detailed measurement results corroborating successful application of the new techniques are reported. A receive AGC dynamic range of 73 dB with linearity error of less than /spl plusmn/2 dB and spread of less than 5 dB for a temperature range of -30/spl deg/C to +85/spl deg/C in the gain control characteristic has been measured. The modulator measurement shows a carrier suppression of 35 dB and sideband/third harmonic suppression of over 46 dB. The core die area of each chip is 1.5 mm/sup 2/.     

Node and element resequencing using the Laplacian of a finite element graph: Part I—General concepts and algorithm

A Finite Element Graph (FEG) is defined here as a nodal graph (G), a dual graph (G*), or a communication graph (G˙) associated with a generic finite element mesh. The Laplacian matrix ( L (G), L (G*) or L (G˙)), used for the study of spectral properties of an FEG, is constructed from usual vertex and edge connectivities of a graph. An automatic algorithm, based on spectral properties of an FEG (G, G* or G˙), is proposed to reorder the nodes and/or elements of the associated finite element mesh. The new algorithm is called Spectral PEG Resequencing (SFR). This algorithm uses global information in the graph, it does not depend on a pseudoperipheral vertex in the resequencing process, and it does not use any kind of level structure of the graph. Moreover, the SFR algorithm is of special advantage in computing environments with vector and parallel processing capabilities. Nodes or elements in the mesh can be reordered depending on the use of an adequate graph representation associated with the mesh. If G is used, then the nodes in the mesh are properly reordered for achieving profile and wavefront reduction of the finite element stiffness matrix. If either G* or G˙ is used, then the elements in the mesh are suitably reordered for a finite element frontai solver, A unified approach involving FEGs and finite element concepts is presented. Conclusions are inferred and possible extensions of this research are pointed out. In Part II of this work,¹ the computational implementation of the SFR algorithm is described and several numerical examples are presented. The examples emphasize important theoretical, numerical and practical aspects of the new resequencing method.     

Function dependent fully testable programmable logic array

Two techniques for designing function-dependent easily testable programmable logic arrays are presented. The techniques can detect all the multiple stuck-at, crosspoint and bridging faults, as compared with most of the existing techniques where some of the faults, especially bridging faults, remain undetected.<>