Manual dexterity of older Mexican American adults: a cross-sectional pilot experimental investigation

This paper reports results from an experimental pilot study performed to quantify the manual dexterity of older Mexican American adults. The Purdue pegboard test, a two-arm coordination test, and a hand-tool dexterity test were used in this study. To enable cross-sectional comparisons of manual dexterity measures of older Mexican American adults with young Mexican American adults, these tests were administered to 18 older Mexican American adults aged 63–85 (mean age: 71.3 years, SD: 7.0 years), recruited from senior recreation centers in El Paso, and eighteen young adults aged 21–32 (mean age: 25.6 years, SD: 3.8 years) recruited from the student body at the University of Texas at El Paso. For the Purdue pegboard test, the number of pegs placed in 30 s using the preferred hand, the non-preferred hand, and both hands were first individually monitored. Then, scores on an assembly task using the Purdue pegboard were obtained. For the two-arm coordination test, participants were required to trace a star pattern with a stylus using both hands. The time for task completion and the number of errors made during task performance were monitored. For the hand-tool dexterity test, participants were required to use common hand tools and remove nuts and bolts from one side of a wooden upright, and to assemble nuts and bolts in the corresponding holes on the other side of the upright. The time taken for task completion was recorded. Since modified Levene's test showed equality of variances, two sample t-tests, comparing the mean responses of older adults with the mean responses of young adults for each individual test, were conducted. Results indicate that responses for the older adults were statistically significant different (p<0.001) from young adults for all Purdue pegboard tasks. On the average, older adults performed significantly slower (p<0.001) than young adults on the two-arm coordination test, and committed more errors before task completion (p<0.05). Older adults also took longer to complete the hand-tool dexterity task compared to their younger counterparts (p<0.05). In addition to the t-tests, manual dexterity performance measures from older adults were regressed with age to determine the cross-sectional age effects on manual dexterity measures. Results indicate that all Purdue pegboard performance measures were significantly affected by age (p<0.05). The time to complete the two-arm coordination test was significantly linearly related to age (p<0.05). However, the number of errors committed by older adults in the performance of the two-arm coordination test was not significantly linearly related to age. Time to complete the hand-tool dexterity was also significantly linearly related to age (p<0.05). Accommodating age-related changes in manual dexterity is important for job design in industry, especially in industries employing older adults requiring significant assembly and hand-tool use.

Relevance to industry

Given the aging of the industrial workforce, it is important to understand how manual dexterity is affected by age, so that jobs requiring significant manual dexterity for task initiation, task performance and task completion are designed to fit older adult dexterity levels.     

Following the trail: understanding information flow in the emergency department

A hospital emergency department (ED) is a complex cognitive work system. ED providers routinely create, process and share various kinds of information in their work. They may constantly transform information using technological artifacts such as an electronic patient information system. The functionality in the technology, however, limits their tasks and activities. So, they create their own artifacts (such as handwritten notes on a post-it note), to share and process information. The goal of the paper is to illustrate how health providers in EDs create, process, transform and share information to achieve work goals. We present the information trail model in the ED to illustrate various facets of information creation activity and generate insights for health information technology design.     

Effect of reaction kinetics of polymer electrolyte on the ion‐conductive behavior for poly(oligo oxyethylene methacrylate)–LiTFSI mixtures

The effect of the reaction kinetics on the ionic conductivity for a comblike‐type polyether (MEO) electrolyte with lithium bis(trifluoromethane sulfonyl)imide (LiTFSI) was characterized by DSC, complex impedance measurements, and ¹H pulse NMR spectroscopy. The ionic conductivity of these electrolytes was affected by the reaction condition of the methacrylate monomer and revealed by the glass transition temperature (T_g), spin–spin relaxation time (T₂), steric effects of the terminal groups, and the number of charge carriers indicated by the VTF kinetic parameter. In this system, the electrolytes prepared by the reaction heating rate of 10°C/min of MEO–H and 15°C/min of MEO–CH₃ showed maximum ionic conductivity, σ_i, two to three times higher in magnitude than that of the σ_i of the others at room temperature. As experimental results, the reaction kinetic rate affected the degree of conversion, the ionic conductivity, and the relaxation behaviors of polyether electrolytes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2149–2156, 2003     

Mechanical properties of drawn poly(methyl methacrylate) filled with ultrafine particles

The elastic and yield properties of drawn poly(methyl methacrylate) (PMMA) filled with ultrafine SiO₂ are described as functions of filler content and size. The drawn PMMA composites were made by uniaxially drawing to x4.0 at 100°C and at a rate of 20 mm/min. Four compliance values, i.e., S₃₃, S₁₁, S₁₃, and S₄₄ were determined. These values decreased with filler content and decreasing filler size. The relative compliance values S^de/S^do(S^de is the compliance of drawn PMMA composites and S^do is that of drawn unfilled PMMA) are almost equivalently changed with changes in filler content. The elastic properties of drawn PMMA composites are thus reinforced isotopically. This is characteristic of PMMA which has a large side group. The yield behavior of drawn PMMA composites have similar filler size and content dependence to those of elastic properties except that the transverse yield stresses become more brittle with filler content. The anisotropy in yield stress is relatively larger than that of elastic properties. This is probably because the anti-reiforcing effect, such as fibrillation becomes prominent with increasing filler content in the perpendicular direction.     

The effect of seawater on fracture mode transition in fatigue

The fracture mode transition for two steels fatigued in air and seawater was investigated by measuring the crack growth rates and by examining the fractured surfaces using scanning electron microscopy. It was found that the transition from normal to shear fracture mode did not always occur in seawater under the same fatigue conditions as in air. Three possible mechanisms, based on the effective stress intensity factor range, the threshold stress intensity factor range and environmentally assisted brittle fracture, are proposed to account for this behaviour and their validity is discussed.     

Forecasting electric power generation in a photovoltaic power system for an energy network

Recently, there has been an increase in concern about the global environment. Interest is growing in developing an energy network by which new energy systems such as photovoltaic and fuel cells generate power locally and electrical power and heat are controlled with a communication network. We developed the power generation forecast method for photovoltaic power systems in an energy network. The method makes use of weather information and regression analysis. We carried out forecasting power output of the photovoltaic power system installed in Expo 2005, Aichi Japan. As a result of comparing measurements with prediction values, the average prediction error per day was about 26% of the measured power. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(4): 16–23, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20755     

Investigations of AB5-type negative electrode for nickel-metal hydride cell with regard to electrochemical and microstructural characteristics

In the present investigation, AB₅-type hydrogen storage alloys with compositions Mm_0.8La_0.2Ni_3.7Al_0.38Co_0.3Mn_0.5Mo_0.02 and Mm_0.75Ti_0.05La_0.2Ni_3.7Al_0.38Co_0.3Mn_0.5Mo_0.02 are synthesized by radio-frequency induction melting. The electrochemical properties are studied through the measurements of discharge capacity, activation process, rate capability, self-discharge rate and cyclic stability of both the electrodes. Pressure-composition isotherms are plotted by converting the electrode potential into the hydrogen pressure following the Nernst equation. The structural and microstructural characterizations are performed by means of X-ray diffraction phase analysis and scanning electron microscopy of as-fabricated and electrochemically tested electrodes. An attempt is made to correlate the observed electrochemical properties with the structural–microstructural characteristics.     

The differential induction machine: Theory and performance

This paper presents the theory and performance of a differential induction machine, which is a special type of induction machine having two shafts projected from the two ends of a single stator. Application of a differential load on the two shafts cause them to run at different speed as a motor, which permits true differential movement and thus can meet the requirements of a differential drive in an electric vehicle. The machine is also capable of regeneration in the differential mode. This paper presents the construction of the above machine and performance of the same based on experimental results from a laboratory prototype. The equivalent circuit of the motor has been presented and verified experimentally.