Inverse identification of constitutive parameters from heat source fields: A local approach applied to hyperelasticity

In this paper, a new inverse identification method of constitutive parameters is developed from full kinematic and thermal field measurements. It consists in reconstructing the heat source field from two different approaches by using the heat diffusion equation. The first one requires the temperature field measurement and the value of the thermophysical parameters. The second one is based on the kinematic field measurement and the choice of a thermo-hyperelastic model that contains the parameters to be identified. The identification is carried out at the local scale, ie, at any point of the heat source field, without using the boundary conditions. In the present work, the method is applied to the challenging case of hyperelasticity from a heterogeneous test. Due to large deformations undergone by the rubber specimen tested, a motion compensation technique is developed to plot the kinematic and the thermal fields at the same points before reconstructing the heterogeneous heat source field. In the present case, the constitutive parameter of the Neo-Hookean model has been identified, and its distribution has been characterized with respect to the strain state at the surface of a cross-shaped specimen.     

Fault-aware Communication Mapping for NoCs with Guaranteed Latency

As feature sizes shrink, transient failures of on-chip network links become a critical problem. At the same time, many applications require guarantees on both message arrival probability and response time. We address the problem of transient link failures by means of temporally and spatially redundant transmission of messages, such that designer-imposed message arrival probabilities are guaranteed. Response time minimisation is achieved by a heuristic that statically assigns multiple copies of each message to network links, intelligently combining temporal and spatial redundancy. Concerns regarding energy consumption are addressed in two ways. First, we reduce the total amount of transmitted messages, and, second, we minimise the application response time such that the resulted time slack can be exploited for energy savings through voltage reduction. The advantages of the proposed approach are guaranteed message arrival probability and guaranteed worst case application response time.     

Canadian research activity in aquaculture: A bibliometric analysis

Analysis of the Canadian publications in the field of aquaculture reveals that Canada is one of the word's major contributors in this area. This confirms that Canada's expertise in science and technology often finds its stimulus in its resource-based industries. Several bibliometric indicators were used to enlighten the peculiar features of the Canadian research system. These include the channels of communication used by scientists, the authorship pattern, the level of collaboration, the identification of the institutions in which the research is performed and the uneven research effort distribution inside the country. The relevance of such quantitative measures for science policy-making is emphasized. The present study shows how bibliometric analysis, by describing the actual strengths and weaknesses of Canadian research and identifying the agents of this research activity, might foster a better understanding of the Canadian research enterprise as a whole.     

Polarization independent isolator using spatial walkoff polarizers

A novel type of polarization-independent optical isolator is described which utilizes the polarization walkoff provided by birefringent crystals. Isolation of 44 dB is measured at a wavelength of 1.3 mu m with single-mode fiber insertion loss of 1.5 dB. A temperature-independent scheme is also described that provides at least 39 dB of isolation over the temperature range of 25-75 degrees C.<>     

PMR1, a Ca2+-ATPase in yeast Golgi, has properties distinct from sarco/endoplasmic reticulum and plasma membrane calcium pumps

PMR1, a P-type ATPase cloned from the yeast Saccharomyces cerevisiae, was previously localized to the Golgi, and shown to be required for normal secretory processes (Antebi, A., and Fink, G.R. (1992) Mol. Biol. Cell 3, 633-654). We provide biochemical evidence that PMR1 is a Ca2+-transporting ATPase in the Golgi, a hitherto unusual location for a Ca2+ pump. As a starting point for structure-function analysis using a mutagenic approach, we used the strong and inducible heat shock promoter to direct high level expression of PMR1 from a multicopy plasmid. Yeast lysates were separated on sucrose density gradients, and fractions assayed for organellar markers. PMR1 is found in fractions containing the Golgi marker guanosine diphosphatase, and is associated with an ATP-dependent, protonophore-insensitive 45Ca2+ uptake activity. This activity is virtually abolished in the absence of the expression plasmid. Furthermore, replacement of the active site aspartate within the phosphorylation domain had the expected effect of abolishing Ca2+ transport activity entirely. Interestingly, the mutant enzymes (Asp-371 --> Glu and Asp-371 --> Asn) demonstrated proper targeting to the Golgi, unlike analogous mutations in the related yeast H+-ATPase. Detailed characterization of calcium transport by PMR1 showed that sensitivity to inhibitors (vanadate, thapsigargin, and cyclopiazonic acid) and affinity for substrates (MgATP and Ca2+) were different from the previously characterized sarco/endoplasmic reticulum and plasma membrane Ca2+-ATPases. PMR1 therefore represents a new and distinct P-type Ca2+-ATPase. Because close homologs of PMR1 have been cloned from rat and other organisms, we suggest that Ca2+-ATPases in the Golgi will form a discrete subgroup that are important for functioning of the secretory pathway.     

Coverage-biased random exploration of large models and application to testing

This paper presents several randomised algorithms for generating paths in large models according to a given coverage criterion. Using methods for counting combinatorial structures, these algorithms can efficiently explore very large models, based on a graphical representation by an automaton or by a product of several automata. This new approach can be applied to random exploration in order to optimise path coverage and can be generalised to take into account other coverage criteria, via the definition of a notion of randomised coverage satisfaction. Our main contributions are a method for drawing paths uniformly at random in composed models, i.e. models that are given as products of automata, first without and then with synchronisation; a new efficient approach to draw paths at random taking into account some other coverage criterion. Experimental results show promising agreement with theoretical predictions and significant improvement over previous randomised approaches. This work opens new perspectives for future studies of statistical testing and model checking, mainly to fight the combinatorial explosion problem.     

Comparison of a contactor catalytic membrane reactor with a conventional reactor: example of wet air oxidation

A wet air oxidation reaction was carried out in a gas/liquid catalytic membrane reactor of the contactor type. The oxidation of formic acid was used as a model reaction. The mesoporous top-layer of a ceramic tubular membrane was used as catalyst (Pt) support, and was placed at the interface of the gas (air) and liquid (HCOOH solution) phases.

A similar reaction was carried out in a conventional batch reactor, using a steering rate high enough to avoid gas-diffusion limitations, and exactly identical conditions than for the CMR (amount of catalyst, pressure, etc.). At room temperature, the CMR showed an initial activity three to six times higher than the conventional reactor. This activity increase was attributed to an easier oxygen access to the catalytic sites. Nevertheless, the catalytic membrane gradually deactivated after a few hours of operation. Different deactivation mechanisms are presented.     

Obtaining high-alumina cement at the semiluksk refractories factory

Conclusions We demonstrate that it is, in principle, possible to obtain refractory high-alumina cement on industrial equipment at the Semiluksk refractories factory. Technological parameters were developed for preparing raw mixtures, pressing the green articles and firing in a tunnel kiln. It was established that the mass percentage of SiO₂ in the raw mixture should not exceed 1.5%. For industrial production of high-alumina cement in department No. 1 it is necessary to implement measures on the mechanization of the production process.Translated from Ogneupory, No. 5, pp. 26–28, May, 1986.     

Effects of the sintering atmosphere on Nb-based dielectrics

The effects of a forming atmosphere on the stability, the sintering and the dielectric properties of Ba₅Nb₄O₁₅, BaNb₂O₆, ZnNb₂O₆ and Zn₃Nb₂O₈ ceramics were investigated, because of the primary importance of the sintering atmosphere in relation to copper sintering. These Nb-based materials were sintered in air and in Ar/H₂10%. Zn-containing samples are very sensitive to the reductive atmosphere. ZnO volatilises at 800–850 °C and the resulting compound does not exhibit the expected properties. BaNb₂O₆ and Ba₅Nb₄O₁₅ are more stable in term of relative weight loss. Nevertheless, the phase analysis reveals a modification of the BaNb₂O₆ phase, what induces the degradation of the dielectric property stability versus temperature. The properties of Ba₅Nb₄O₁₅ are not modified by a sintering in reductive atmosphere. A relative permittivity of 38.8, a permittivity temperature coefficient of −150 ppm °C⁻¹ and an insulating resistivity of 10^10.9 Ω cm were obtained for this latter.