Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

Secondary abnormality of carnitine biosynthesis results from carnitine reabsorptional system defect in juvenile visceral steatosis mice

We characterized the L-carnitine transport system which is defective in the kidney of juvenile visceral steatosis (JVS) mice by using kidney slices and carnitine-related compounds, and evaluated the influence of the transport defect on the biosynthetic pathway of carnitine. The JVS mouse transport system defect, calculated as the difference in the transport activity between control and JVS mice, was simulated in control by gamma-butyrobetaine (gamma-BB) and acetyl L-carnitine. gamma-BB hydroxylase activity in the liver of JVS mice was double that of control mice, but the hepatic level of gamma-BB in JVS mice was lower than in control mice, suggesting that the conversion of gamma-BB to carnitine is not activated in the liver of JVS mice. JVS mice showed higher fractional excretions not only of L-carnitine but also of gamma-BB and acetyl L-carnitine than control mice, indicating disturbed reabsorption of gamma-BB and acetyl L-carnitine. The disturbed reabsorption of gamma-BB in JVS mice is consistent with the fact that the amount of urinary gamma-BB in JVS mice was four times that of control. The sum of the concentrations of L-carnitine, acetyl L-carnitine and gamma-BB in the urine of JVS mice was not significantly different from that of the control, suggesting no remarkable increase of biosynthesis of gamma-BB and carnitine in JVS mice. All these findings suggest that the carnitine transport system plays a role in the transport of gamma-BB and that carnitine deficiency is aggravated by the disturbed reabsorption of gamma-BB in the kidney.     

BESS: a source structure that fully suppresses the floating bodyeffects in SOI CMOSFETs

The most serious problem preventing the widespread use of SOI CMOSFETs-the floating body effects-are almost fully suppressed by a new source structure. In an nMOSFET, this new structure can be represented by an equivalent circuit of a bipolar embedded source structure (BESS) just beneath the n⁺ source junction. In the source region, or p type (or n^--type) recombination centers are embedded in a low-impurity-diffusion region (the base) and acts as a collector of the excess body carriers. The low-impurity-source region lowers the diffusion potential barrier for holes at the source junction. The solid-phase epitaxial regrowth mechanism of the Si⁺ implanted amorphous SOI layer was studied and applied to fabricate a prototype of this device capable of symmetric source-drain operations with the same source-drain breakdown voltage as that of a bulk device     

Instability of the 12-nucleotide repeat in c-myb gene of bovine T-lymphoma cells

Insertion of a 12-nucleotide repeat in c-myb gene exon 9 was observed in about 15% of sporadic bovine T-lymphomas. The 12-nucleotide repeat in the T-lymphoma cells showed deletion and insertion of the repeat units during cultivation of the cells. To know whether deficiency in DNA loop repair is involved in the instability of the repeat, abilities to bind and correct the loop structure in nuclear extracts were examined. The nuclear extracts of all examined cells had ability to bind and correct the loop structure. These data suggest that instability of the 12-nucleotide repeat in bovine T-lymphoma cells might be independent of deficiency of DNA loop repair function.     

Mechanochemically synthesized ZIF-8 nanoparticles blended into 6FDA-TrMPD membranes for C3H6/C3H8 separation

The mixed matrix membranes (MMMs) consisting zeolitic-imidazolate framework-8 (ZIF-8) nanoparticles in a polymer have been of considerable interest in separation applications. The fillers used are mostly synthesized using the solvothermal method. In this study, the ZIF-8 nanoparticles were synthesized using a solvent-less and salt-free mechanochemical method and were added to 6FDA-TrMPD polyimide to prepare MMMs. The single gas permeation of C₃H₆ and C₃H₈ through the MMMs was investigated. The C₃H₆ permeability and C₃H₆/C₃H₈ ideal selectivity of a 20 wt% mechano-synthesized ZIF-8/6FDA-TrMPD MMM were 70% and 32% higher than those of the neat polymer membrane at 0.1 MPa and 308 K, respectively. The C₃H₆/C₃H₈ separation performance of the mechano-synthesized ZIF-8 MMM was similar to that of the conventional solvothermal-synthesized ZIF-8 MMM. This separation performance was in good agreement with the Maxwell model. Temperature and pressure dependence analyses confirmed that the mechano-synthesized ZIF-8 nanoparticles acted as molecular sieves in the MMMs for the C₃H₆ and C₃H₈ permeation.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Two-step design of critical control systems using disturbance cancellation integral controllers

An efficient critical control system design is proposed in this paper. The key idea is to decompose the design problem into two simpler design steps by the technique used in the classical loop transfer recovery method (LTR). The disturbance cancellation integral controller is used as a basic controller. Since the standard loop transfer recovery method cannot be applied to the disturbance cancellation controller, the nonstandard version recently found is used for the decomposition. Exogenous inputs with constraints both on the amplitude and rate of change are considered. The majorant approach is taken to obtain the analytical sufficient matching conditions. A numerical design example is presented to illustrate the effectiveness of the proposed design.     

Novel exposure system using light-emitting diodes and an optical fiber array for printing serial numbers and code marks

Feasibility of a novel exposure system to print serial numbers and two-dimensional code marks was demonstrated. The new system used light-emitting diodes (LEDs) combined with an optical fiber matrix array as a light source. At first, as preparatory experiments, code mark patterns were printed using a prototype exposure system without using the optical fiber array but using the combination of arrayed LEDs with a central wavelength of 428 nm, spherical lenses, and rod lenses. Although the code mark patterns were successfully printed, it took too much exposure time. For this reason, bullet-type LEDs with a high power and a shorter wavelength of 405 nm were used and the optical fiber matrix array was adopted. Because the emitted light rays were efficiently taken into the fiber, and the resist sensitivity was improved, practically available short exposure time of less than 2 s was obtained.     

Colorless polyimides with low coefficient of thermal expansion derived from alkyl‐substituted cyclobutanetetracarboxylic dianhydrides

Alkyl‐substituted cyclobutanetetracarboxylic dianhydrides (CBDAs) were synthesized by photo‐dimerization of alkyl‐substituted maleic anhydrides to obtain novel colorless polyimides (PIs). Dimethyl‐substituted CBDA (DM‐CBDA) showed much higher polymerizability with various diamines than conventional cycloaliphatic tetracarboxylic dianhydrides and led to high molecular weights of PI precursors. Polyaddition of non‐substituted CBDA and trans‐1,4‐cyclohexanediamine (t‐CHDA) was completely inhibited by salt formation in the initial reaction stage. The use of DM‐CBDA allowed the formation of a homogeneous/viscous PI precursor solution by overcoming the salt formation problem. The prominent substituent effect probably reflects how the methyl substituents of DM‐CBDA contributed to increasing the salt solubility. Some of the thermally imidized DM‐CBDA‐based systems simultaneously possessed non‐coloration, low coefficient of thermal expansion (CTE), very high T_g exceeding 300 °C and very low dielectric constant. Copolymerization was very effective for improving the solubility of DM‐CBDA‐based PIs. The copolyimide cast films prepared via chemical imidization displayed a further decreased CTE without sacrificing other target properties, suggesting that the present materials can be useful as plastic substrates in display devices. The mechanism of self‐chain orientation behavior during solution casting is also discussed. A potential application of the copolyimide systems as optical compensation film materials in liquid crystal displays is proposed. © 2013 Society of Chemical Industry .