Process optimization and related material properties of silicon films produced by laser-induced chemical vapour deposition from silane

Laser-induced chemical vapour deposition of silicon films on SiO₂/Si (1 0 0) and Si (1 0 0) substrates was studied using ArF laser irradiation of silane/argon gas mixture in parallel to the substrate. The optimal deposition conditions were specified by examination of film morphology at a wide range of irradiation and process parameters. At optimal conditions, specular films were obtained with no powder formation. The effect of deposition parameters, such as laser energy and repetition rate, on the deposition rate and the related film quality, was investigated.     

A practical approximation algorithm for optimal k-anonymity

k-Anonymity is a privacy preserving method for limiting disclosure of private information in data mining. The process of anonymizing a database table typically involves generalizing table entries and, consequently, it incurs loss of relevant information. This motivates the search for anonymization algorithms that achieve the required level of anonymization while incurring a minimal loss of information. The problem of k-anonymization with minimal loss of information is NP-hard. We present a practical approximation algorithm that enables solving the k-anonymization problem with an approximation guarantee of O(ln k). That algorithm improves an algorithm due to Aggarwal et al. (Proceedings of the international conference on database theory (ICDT), 2005) that offers an approximation guarantee of O(k), and generalizes that of Park and Shim (SIGMOD ’07: proceedings of the 2007 ACM SIGMOD international conference on management of data, 2007) that was limited to the case of generalization by suppression. Our algorithm uses techniques that we introduce herein for mining closed frequent generalized records. Our experiments show that the significance of our algorithm is not limited only to the theory of k-anonymization. The proposed algorithm achieves lower information losses than the leading approximation algorithm, as well as the leading heuristic algorithms. A modified version of our algorithm that issues ℓ-diverse k-anonymizations also achieves lower information losses than the corresponding modified versions of the leading algorithms.     

Mass transfer in an electrochemical reactor with two interacting jets

An electrochemical reactor operated with two identical solution streams injected in opposite directions on the same axis, and leaving it at a normal direction was studied by measuring local and global mass transfer coefficients and visualization of solution flow patterns. This flow configuration was compared to a case where a single stream enters the reactor and leaves it on the same axis. It was found that only the data obtained for the single stream mode can be correlated by the Chilton-Colburn relation, indicating a near laminar boundary layer flow. Global mass transfer coefficients for the single stream mode were found to be slightly higher than those for the interacting jets mode. However, when comparing the two modes by taking into account the dimensionless ratio of the mass transfer coefficient (Sh) to the energy consumption (Eu), it was found that the interacting jets (IJ) mode exhibits a better performance as compared to the single stream mode. The superiority of the IJ mode increases with increasing Reynold's number (Re).Nomenclature A, B adjustable parameters - b half width of channel - C electrolyte ion concentration - d inlet pipe diameter - d microelectrode diameter - D diffusion coefficient - maximum value of mean deviation - E pumping energy - Eu Euler number - F Faraday number - i current to a single microelectrode on an active wall - i current to a single microelectrode in an inert wall - I global diffusion current - k mass transfer coefficient to a single microelectrode in an active wall - k mass transfer coefficient to a single microelectrode in an inert wall - K global mass transfer coefficient - Q volumetric flow rate - Q _T total volumetric flow rate - R radius of the electrochemical reactor - Re Reynolds number - s surface area of a microelectrode - S surface area of the working electrode - Sc Schmidt number - Sh Sherwood number - V _x axial flow velocity alongx-axis - V flow velocity at large distance from the leading edge - V mean flow velocity - x axis tangential to the surface - y axis normal to the surface - z number of electrons transferred in the reaction (z=1 in the present case) Greek letters viscosity - specific gravity - kinematic viscosity (/) - P pressure drop across the reactor - V voltage drop across the reactor Abbreviations ST single stream - IJ interacting jets     

Stimulation of 5-HT2A receptors on astrocytes in primary culture opens voltage-independent Ca2+ channels

A two-step exocytosis/endocytosis protocol was used in rat pancreatic acini to study membrane trafficking events at the apical plasma membrane (APM) as a function of extracellular pH. Exocytosis, as measured by cholecystokinin (CCK)-8-induced release of amylase into the incubation medium, was relatively insensitive to changes in extracellular pH from 5.5 to 9.0. In contrast, endocytosis, as measured by temperature-dependent uptake of horseradish peroxidase (HRP), was robust at pH values between 6.5 and 8.3 but abolished at acidic pH values of 5.5 to 6.0. Energy metabolism and cell viability were maintained during pH 6-induced cessation of HRP uptake, and the vesicular block could be reversed upon raising the luminal pH to 7.4. Histochemical and morphometric studies of HRP uptake examined by electron microscopy indicated that extracellular pH regulates endocytosis at the apical plasma membrane. At pH 6.0 in prestimulated cells, HRP uptake at the APM was abolished, and acinar lumen membranes remained markedly dilated with decreased density of microvilli and "arrested" exocytic images. At pH 7.4, HRP was taken up into endolysosomal structures within the Golgi complex, and acinar lumen membranes were contracted. Cleavage of GP2, a glycosyl phosphatidylinositol-anchored protein, was associated with the pH-dependent activation of HRP uptake. These studies demonstrate that acinar lumen pH regulates endocytic but not exocytic activity at the APM and suggest that alkalinization of the acinar lumen by duct cells is required for retrieval of exocytic membranes into the acinar cell via vesicular uptake mechanisms. The role of acid-base interactions within the acinar lumen provides a novel basis for understanding the cellular and luminal defects observed within the exocrine pancreas in cystic fibrosis.     

The social costs of emotional suppression: A prospective study of the transition to college.

There is growing interest in understanding how emotion regulation affects adaptation. The present study examined expressive suppression (which involves inhibiting the overt expression of emotion) and how it affects a critical domain of adaptation, social functioning. This investigation focused on the transition to college, a time that presents a variety of emotional and social challenges. Analyses focused on 2 components of suppression: a stable component, representing individual differences expressed both before and after the transition, and a dynamic component, representing variance specific to the new college context. Both components of suppression predicted lower social support, less closeness to others, and lower social satisfaction. These findings were robustly corroborated across weekly experience reports, self-reports, and peer reports and are consistent with a theoretical framework that defines emotion regulation as a dynamic process shaped by both stable person factors and environmental demands. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Optimization of culture conditions for biohydrogen production from sago wastewater by Enterobacter aerogenes using Response Surface Methodology

Sago wastewater (SWW) causes pollution to the environment due to its high organic content. Annually, about 2.5 million tons of SWW is produced in Malaysia. In this study, the potential of SWW as a substrate for biohydrogen production by Enterobacter aerogenes (E. aerogenes) was evaluated. Response Surface Methodology (RSM) was employed to find the optimum conditions. From preliminary optimization, it was found that the most significant factors were yeast extract, temperature, and inoculum size. According to Face Centered Central Composite Design (FCCCD), the maximum hydrogen concentration and yield were 630.67 μmol/L and 7.42 mmol H₂/mol glucose, respectively, which is obtained from the sample supplemented with 4.8 g/L yeast extract concentration, 5% inoculum, and incubated at the temperature of 31 °C. Cumulative hydrogen production curve fitted by the modified Gompertz equation suggested that H_max, R_max, and λ from this study were 15.10 mL, 2.18 mL/h, and 9.84 h, respectively.     

An improved method to create nitrocellulose particles suitable for the immobilization of antigen and antibody

A method is described for producing 1-3 microns sized particles of nitrocellulose (NC) which are able to absorb protein. Protein is absorbed onto preformed particles made by first dissolving a sheet of nitrocellulose paper in DMSO, and then precipitating it with sodium carbonate/bicarbonate buffer. The efficiency of binding is the same as that of an equivalent sheet of non-processed NC filter paper. Antibodies absorbed onto preformed particles are not exposed to DMSO and carbonate buffer and therefore retain a high antigen binding capacity. Antigen and antibody-absorbed NC preformed particles were used to capture antibody and antigen, respectively. Using lysis buffer, the captured antibodies and antigens were readily released from the NC particles. This makes the latter an appropriate matrix for immunoprecipitation assays either for an antigen or for specific antibody. Antigen-coated NC particles were specifically aggregated ('agglutinated') by specific antibodies and thus can be used in semi-quantitative tests.     

Characterizing biofuel combustion with patterns of real-time emission data (PaRTED)

Emission properties and quantities from combustion sources can vary significantly during operation, and this characteristic variability is hidden in the traditional presentation of emission test averages. As a complement to the emission test averages, we introduce the notion of statistical pattern analysis to characterize temporal fluctuations in emissions, using cluster analysis and frequency plots. We demonstrate this approach by comparing emissions from traditional and improved wood-burning cookstoves under in-field conditions, and also to contrast laboratory and in-field cookstove performance. Compared with traditional cookstoves, improved cookstoves eliminate emissions that occur at low combustion efficiency. For cookstoves where the only improvement is an insulated combustion chamber, this change results in emission of more light-absorbing (black) particles. When a chimney is added, the stoves produce more black particles but also have reduced emission factors. Laboratory tests give different results than in-field tests, because they fail to reproduce a significant fraction of low-efficiency events, spikes in particulate matter (PM) emissions, and less-absorbing particles. These conditions should be isolated and replicated in future laboratory testing protocols to ensure that stove designs are relevant to in-use operation.     

Modal transmission-line theory of three-dimensional periodic structures with arbitrary lattice configurations

The scattering of waves by multilayered periodic structures is formulated in three-dimensional space by using Fourier expansions for both the basic lattice and its associated reciprocal lattice. The fields in each layer are then expressed in terms of characteristic modes, and the complete solution is found rigorously by using a transmission-line representation to address the pertinent boundary-value problems. Such an approach can treat periodic arbitrary lattices containing arbitrarily shaped dielectric components, which may generally be absorbing and have biaxial properties along directions that are parallel or perpendicular to the layers. We illustrate the present approach by comparing our numerical results with data reported in the past for simple structures. In addition, we provide new results for more complex configurations, which include multiple periodic regions that contain absorbing uniaxial components with several possible canonic shapes and high dielectric constants.     

Explaining characteristic azeotropic behaviour

An explanation of the formation of minimum-boiling, maximum-boiling and saddle-type azeotropes is given (with illustrative examples) in terms of the molecular interactions in the solutions and in the pure liquids. “Interaction weakening” and “interaction strengthening” effects are defined which tend to be associated with the formation of minimum-boiling and maximum-boiling azeotropes respectively. As defined these effects correspond respectively to positive and to negative values of the interchange energy in regular solution theory, though the concept is considered to be of more general application than is this simple model. When more than two components are present it is possible for both effects to occur leading to the possibility of saddle-type azeotropy.By considering the nature of the intermolecular fones it is possible to predict the kind of azeotope which will be formed, if an azeotrope is formed at all. Although present knowledge of intermolecular fones is far from complete, enough is known to enable this prediction to be made in many cases. The more exacting question of whether or not an azeotope will be formed cannot yet be answered with the same certainty partly because of the lack of a completely satisfactory model of the liquid state.