Amination of biochar surface from watermelon peel for toxic chromium removal enhancement

Watermelon peel residues were used to produce a new biochar by dehydration method. The new biochar has undergone two methods of chemical modification and the effect of this chemical modification on its ability to adsorb Cr(VI) ions from aqueous solution has been investigated. Three biochars, Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, were made from watermelon peel via dehydration with 50% sulfuric acid to give Melon-B followed by oxidation with ozone and amination using ammonium hydroxide to give Melon-BO-NH_2 or Triethylenetetramine(TETA) to give Melon-BO-TETA. The prepared biochars were characterized by BET, BJH,SEM, FT-IR, TGA, DSC and EDAX analyses. The highest removal percentage of Cr(VI) ions was 69% for Melon-B,98% for Melon-BO-NH_2 and 99% for Melon-BO-TETA biochars of 100 mg·L~(-1) Cr(VI) ions initial concentration and 1.0 g·L~(-1) adsorbents dose. The unmodified biochar(Melon-B) and modified biochars(Melon-BO-NH_2 and Melon-BO-TETA) had maximum adsorption capacities(Qm) of 72.46, 123.46, and 333.33 mg·g~(-1), respectively.The amination of biochar reduced the pore size of modified biochar, whereas the surface area was enhanced.The obtained data of isotherm models were tested using different error function equations. The Freundlich,Tempkin and Langmuir isotherm models were best fitted to the experimental data of Melon-B, Melon-BO-NH_2 and Melon-BO-TETA, respectively. The adsorption rate was primarily controlled by pseudo-second–order rate model. Conclusively, the functional groups interactions are important for adsorption mechanisms and expected to control the adsorption process. The adsorption for the Melon-B, Melon-BO-NH_2 and Melon-BO-TETA could be explained for acid–base interaction and hydrogen bonding interaction.     

Statistical synchronization among participants in real-time multimedia conferencing

In this paper, an algorithm to determine the set of packets generated continuously and periodically from different participants that are arriving at a node either for mixing at the master of a conference, or for simply playing back at a regular participant of a conference, is proposed. The essence of the algorithm is to estimate the expected packet arrival time (or reference time) for each participant. With the reference time at hand, the maximum jitter and the optimum waiting time for a mixer to wait packets from all participants can be determined. An enhancement to improve synchronization which deals with the estimation of the time offsets between the individual periods of the sources and the period of the receiver is also presented. The error of the proposed algorithm is enumerated by the Chernoff bound and demonstrated by simulation and is shown to be acceptable in practical application. The algorithm can also be employed when traffic sources operate with different periods.     

A modified flow enforcement technique for ATM networks

In ATM networks the requirement of providing the negotiated Quality of Service (QOS) needs an efficient flow enforcement technique that will result in preventive congestion control. A very effective technique is the Exponentially Weighted Moving Average (EWMA) method. In this paper, we have suggested improvements to the EWMA and call it the Enhanced EWMA (EEWMA). Simulation results show that the EEWMA is consistently better than the EWMA in most of the situations. We present comparisons of cell loss under various conditions. No theoretical analysis is presented.     

Novel thermally and mechanically stable hydrogel for enzyme immobilization of penicillin G acylase via covalent technique

κ‐Carrageenan hydrogel crosslinked with protonated polyethyleneimine (PEI⁺) and glutaraldehyde (GA) was prepared and evaluated as a novel biocatalytic support for covalent immobilization of penicillin G acylase (PGA). The method of modification of the carrageenan biopolymer is clearly illustrated using a schematic diagram and was verified by FTIR, elemental analysis, DSC, and INSTRON using the compression mode. Results showed that the gels' mechanical strength was greatly enhanced from 3.9 kg/cm² to 16.8 kg/cm² with an outstanding improvement in the gels thermal stability. It was proven that, the control gels were completely dissolved at 35°C, whereas the modified gels remained intact at 90°C. The DSC thermogram revealed a shift in the endothermic band of water from 62 to 93°C showing more gel‐crosslinking. FTIR revealed the presence of the new functionality, aldehydic carbonyl group, at 1710 cm^?1 for covalent PGA immobilization. PGA was successfully immobilized as a model industrial enzyme retaining 71% of its activity. The enzyme loading increased from 2.2 U/g (control gel) to 10 U/g using the covalent technique. The operational stability showed no loss of activity after 20 cycles. The present support could be a good candidate for the immobilization of industrial enzymes rich in amino groups, especially the thermophilic ones. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.     

A sensing strategy for the reverse engineering of machined parts

The reverse engineering of machined parts requires sensing an existing part and producing a design (and perhaps a manufacturing process) for it. We have developed a reverse engineering system that has proven effective with a set of machined parts. This paper describes the system, presents some results, and discusses strategy for a new system.This work was supported by ARPA under ARO grant number DAAH04-93-G-0420, DARPA grant N00014-91-J-4123, NSF grant CDA 9024721, and a University of Utah Research Committee grant. All opinions, findings, conclusions or recommendations expressed in this document are those of the authors and do not necessarily reflect the views of the sponsoring agencies.     

An accelerated algorithm for full band electron–phonon scattering rate computation

Computing scattering rates of electrons and phonons stands at the core of studies of electron transport properties. In the high field regime, the interactions between all electron bands with all phonon bands need to be considered. This full band interaction implies a huge computational burden in calculating scattering rates. In this study, a new accelerated algorithm is presented for this task, which speeds up the computation by two orders of magnitude (100 times) and dramatically simplifies the coding. At the same time, it visually demonstrates the physical process of scattering more clearly.     

Bandwidth Adaptive Cache Coherence Optimizations for Chip Multiprocessors

Chip Multiprocessors (CMPs) have different technological parameters and physical constraints than earlier multi-processor systems, which should be taken into consideration when designing cache coherence protocols. Also, contemporary cache coherence protocols use invalidate schemes that are known to generate a high number of coherence misses. This is especially true under producer-consumer sharing patterns that can become a performance bottleneck as the number of cores increases. This paper presents two mechanisms to design efficient and scalable cache coherence protocols for CMPs. First, we propose an adaptive hybrid protocol to reduce coherence misses observed in write-invalidate based protocols. The proposed protocol is based on a write-invalidate scheme. However, adaptively, it can push updates to potential consumers based on observed producer-consumer sharing patterns. Secondly, we extend this adaptive protocol with an interconnection resource aware mechanism. Experimental evaluations, conducted on a tiled-CMP via full-system simulation, were used to assess the performance from our proposed dynamic hybrid protocols. Performance analysis is presented on a set of scientific applications from the SPLASH-2 and NAS parallel benchmark suites. Results showed that the proposed mechanisms reduce cache-to-cache sharing misses up to 48 % and speed up application performance up to 34 %. In addition, the proposed interconnection resource aware mechanism is proven to perform well under varying interconnection utilizations.