Theoretical and measured characteristics of metal(CoSi2)-insulator(CaF2) resonant tunnelingtransistors and the influence of parasitic elements

We report on the theoretical and measured characteristics of triple-barrier metal (CoSi₂)-insulator(CaF₂) (M-I) resonant tunneling transistors (RTT) grown on an n-Si(111) substrate, and the influence of their parasitic elements on the measured characteristics. First, we analyze theoretical characteristics of an M-I RTT, and then show fabrication process and current-voltage (I-V) characteristics obtained at 77 K, in which several degradations are observed: large resonance voltage, low peak-to-valley (P-V) ratios at negative differential resistance (NDR), and reverse base current. Analysis, taking several parasitic elements (e.g., base resistance, substrate resistance and leakage currents connected to the intrinsic transistor) into account, explains observed characteristics well. Finally, we show the first transistor action with large P-V ratios at 300 K, which is achieved by reducing collector-emitter leakage currents     

Hydroxyapatite crystal growth on calcium hydroxyapatite ceramics

Calcium hydroxyapatite (Ca-HAP) ceramics containing tricalcium phosphate (TCP) were soaked in three solutions: phosphate buffer, tris buffer, and simulated body fluid (SBF). Petal-like crystals of Ca-HAP were deposited on the Ca-HAP ceramics when (i) Ca-HAP ceramics contained -TCP, (ii) the soaking solution contained phosphate ion and (iii) the pH of soaking solution was higher than 7.3. These conditions facilitate the presence of HPO ₄ ^2– and Ca²⁺ ions, the latter from dissolution of -TCP. A well-defined X-ray diffraction pattern for the deposited Ca-HAP crystals indicates preferred growth of {002} planes. Slower crystal growth of Ca-HAP was found for SBF (pH=7.5) than in the phosphate buffer, due possibly to the lower phosphate ion content in SBF.     

Preparation of plasma-polymerized membranes from I-(trimethylsilyl)-I-propyne and gas permeability through the membranes

Summary Plasma-polymerized membranes for gas separation were prepared from 1-(trimethylsilyl)-1-propyne. The permeation data of He, H₂ 0₂, N₂, CO₂, and CH₄ through the membranes showed plasma-polymerized 1-(trimethylsilyl)-1-propyne had high permselectivity but low permeability compared with poly[l-(trimethylsilyl)-1-propyne]. This behavior is considered to be due to the crosslinking structure of the plasma-polymerized membrane. The correlation between plasma polymerization conditions and the membrane performance was studied. The optimum condition at which the deposition rate of the plasma polymer is maximized agreed with the optimum value to yield maximum separation factor of gases through the membrane.     

Optical element converting linear polarization into circular-tangential polarization

A new optical element capable of converting linear polarization into circular-tangential polarization (i.e., the electric vector is along the tangential direction to a circle) is proposed and demonstrated. The conversion characteristics of the fabricated element are evaluated, and the magnitude of aberration produced by the element is shown to be insignificant.     

Bayesian inference explains perception of unity and ventriloquism aftereffect: identification of common sources of audiovisual stimuli

We study a computational model of audiovisual integration by setting a Bayesian observer that localizes visual and auditory stimuli without presuming the binding of audiovisual information. The observer adopts the maximum a posteriori approach to estimate the physically delivered position or timing of presented stimuli, simultaneously judging whether they are from the same source or not. Several experimental results on the perception of spatial unity and the ventriloquism effect can be explained comprehensively if the subjects in the experiments are regarded as Bayesian observers who try to accurately locate the stimulus. Moreover, by adaptively changing the inner representation of the Bayesian observer in terms of experience, we show that our model reproduces perceived spatial frame shifts due to the audiovisual adaptation known as the ventriloquism aftereffect.     

The Influence of Rapid Annealing Cycles on the Recrystallisation Behaviour of Cold Rolled Ultra Low Carbon and Low Carbon Steel

For ultra low carbon (ULC) and low carbon steel (LC), the influence of heating rate, annealing temperature, and holding time on the recrystallisation behaviour and the resulting grain size was investigated. For ULC smallest grain sizes of about 9 μm were obtained at the lowest heating rate whereas for LC significant smaller grain sizes of about 5 μm were determined at the highest heating rate. Furthermore, the evolution of the grain size distribution with varying heating rate, annealing temperature, and holding time was studied in dependence of the rolling and normal direction. The state of the as‐hot rolled microstructure as well as the precipitation state exert a strong influence on the development of the recrystallised microstructure along the different directions for both steel grades. The inherent prolonged microstructure due to the cold rolling process is still obvious just after recrystallisation. With ongoing annealing and grain growth, the aspect ratio approaches the equiaxed state. This change proceeds faster for the ULC steel grade. With increasing annealing temperature, the bimodal character of the grain size distribution disappears and the distribution becomes more homogeneous.     

Mathematical analysis of oxygen transfer through polydimethylsiloxane membrane between double layers of cell culture channel and gas chamber in microfluidic oxygenator

For successful cell culture in microfluidic devices, precise control of the microenvironment, including gas transfer between the cells and the surrounding medium, is exceptionally important. The work is motivated by a polydimethylsiloxane (PDMS) microfluidic oxygenator chip for mammalian cell culture suggesting that the speed of the oxygen transfer may vary depending on the thickness of a PDMS membrane or the height of a fluid channel. In this paper, a model is presented to describe the oxygen transfer dynamics in the PDMS microfluidic oxygenator chip for mammalian cell culture. Theoretical studies were carried out to evaluate the oxygen profile within the multilayer device, consisting of a gas reservoir, a PDMS membrane, a fluid channel containing growth media, and a cell culture layer. The corresponding semi-analytical solution was derived to evaluate dissolved oxygen concentration within the heterogeneous materials, and was found to be in good agreement with the numerical solution. In addition, a separate analytical solution was obtained to investigate the oxygen pressure drop (OPD) along the cell layer due to oxygen uptake of cells, with experimental validation of the OPD model carried out using human umbilical vein endothelial cells cultured in a PDMS microfluidic oxygenator. Within the theoretical framework, the effects of several microfluidic oxygenator design parameters were studied, including cell type and critical device dimensions.     

MC180295 Inhibited Epstein–Barr Virus-Associated Gastric Carcinoma Cell Growth by Suppressing DNA Repair and the Cell Cycle

DNA methylation of both viral and host DNA is one of the major mechanisms involved in the development of Epstein–Barr virus-associated gastric carcinoma (EBVaGC); thus, epigenetic treatment using demethylating agents would seem to be promising. We have verified the effect of {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295, which was discovered by screening for demethylating agents. {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295 inhibited cell growth of the EBVaGC cell lines YCCEL1 and SNU719 in a dose-dependent manner. In a cell cycle analysis, growth arrest and apoptosis were observed in both YCCEL1 and SNU719 cells treated with {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295. MKN28 cells infected with EBV were sensitive to {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295 and showed more significant inhibition of cell growth compared to controls without EBV infection. Serial analysis of gene expression analysis showed the expression of genes belonging to the role of BRCA1 in DNA damage response and cell cycle control chromosomal replication to be significantly reduced after {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295 treatment. We confirmed with quantitative PCR that the expression levels of BRCA2, FANCM, RAD51, TOP2A, and CDC45 were significantly decreased by {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295. LMP1 and BZLF1 are EBV genes with expression that is epigenetically regulated, and {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295 could up-regulate their expression. In conclusion, {"type":"entrez-nucleotide","attrs":{"text":"MC180295","term_id":"1885105835","term_text":"MC180295"}}MC180295 inhibited the growth of EBVaGC cells by suppressing DNA repair and the cell cycle.     

Field effect surface passivation of SiO2/Si interfaces by heat treatment with high-pressure H2O vapor

We investigated a simple field effect passivation of the silicon surfaces using the high-pressure H₂O vapor heating. Heat treatment with 2.1×10⁶ Pa H₂O vapor at 260°C for 3 h reduced the surface recombination velocity from 405 cm/s (before the heat treatment) to 38 cm/s for the thermally evaporated SiO_x film/Si. Additional deposition of 140 nm-SiO_x films (x<2) with a high density of fixed positive charges on the SiO₂/Si samples further decreased the surface recombination velocity to 22 cm/s. We also demonstrated the field effect passivation for n-type silicon wafer coated with thermally grown SiO₂. Additional deposition of 210 nm SiO_x films on both the front and rear surfaces increased the effective lifetime from 1.4 to 4.6 ms. Combination of thermal evaporation of SiO_x film and the heat treatment with high-pressure H₂O vapor is effective for low-temperature passivation of the silicon surface.     

Studies on analysis of terpene resin in imported chewing gums

We have developed an analytical method for terpene resins in chewing gum. The fraction including terpene resins was prepared by means of hexane extraction and two silica gel column chromatography treatments (hexane and ethyl acetate) from chewing gum. The terpene resin fraction was analyzed with LC/MS and IR. The terpene resins are mixtures of polymeric pinene and/or limonene, which have a monomer molecular weight of 136. The MS spectrum of the terpene resin peak on the LC/MS total ion chromatogram showed protonated molecular ion (M + H)+ peaks at intervals of m/z 136, characteristic of a complex mixture of polyterpenes. IR spectroscopy is a suitable technique to identify the terpene resin type, ie., pinene or limonene. When the method was applied to imported chewing gum sold in Japan, terpene resins were clearly detected.