Experimental Investigation of FRP-Strengthened RC Beam-Column Joints

The results of a comprehensive experimental program, aimed at providing a fundamental understanding of the behavior of shear-critical exterior reinforced concrete (RC) joints strengthened with fiber reinforced polymers (FRP) under simulated seismic load, are presented in this study. The role of various parameters on the effectiveness of FRP is examined through 2/3-scale testing of 18 exterior RC joints. Conclusions are drawn on the basis of certain load versus imposed displacement response characteristics, comprising the strength (maximum lateral load), the stiffness, and the cumulative energy dissipation capacity. The results demonstrate the important role of mechanical anchorages in limiting premature debonding, and they provide important information on the role of various parameters, including: area fraction of FRP; distribution of FRP between the beam and the column; column axial load; internal joint (steel) reinforcement; initial damage; carbon versus glass fibers; sheets versus strips; and effect of transverse beams.     

Flow-cytometric analysis of reticulocytes in normal cord blood

We performed precise reticulocyte counts and a reticulocyte maturation study according to ribosomal RNA (rRNA) content, in normal cord blood. For this purpose we analyzed 35 cord blood specimens corresponding to a mean gestational age of 39.2 weeks (range 38-41). In all specimens complete blood counts were performed with the H*1 (Technicon, Bayer) analyzer. Reticulocyte maturation study and counts were conducted by the R-1000 (Sysmex) reticulocyte analyzer. We obtained the following measurements (mean +/- 1 SD): reticulocyte percentage 3.11 +/- 0.75% and reticulocyte absolute count 137.3 +/- 33.3 x 10(9)/l. There was no correlation between the reticulocyte counts and the duration of gestation or the type of labor (normal, forceps assisted or cesarean section). Reticulocyte subpopulations with different rRNA content and maturation were expressed as reticulocytes with high (HFR), median (MFR) and low (LFR) fluorescence of the fluorochrome auramine bound to rRNA. Normal cord values were: HFR% = 13.6 +/- 2.4, MFR% = 22.5 +/- 2.4 and LFR% = 63.9 +/- 4.3. Reference maturation subpopulations were assessed for comparison in 180 samples of healthy adults (90 males and 90 females) and were found HFR% = 1.0 +/- 0.8, MFR% = 9.7 +/- 3.3 and LFR% = 89.2 +/- 3.4. The HFR% and MFR% were significantly higher while LFR% was significantly lower (p < 0.001) in cord compared to adult blood, denoting a shift to more immature reticulocyte forms. The above values are provided as normal reference data of the reticulocyte maturation profile in full-term cord blood.     

Filling of a complex-shaped mold with a viscoelastic polymer. Part II: Comparison with experimental data

An experimental program has been carried out on a reciprocating screw injection molding machine in order to establish the validity of a proposed mathematical model for the filling stage of injection molding. A cavity of complex shape with an insert and variable thickness was constructed and used in these experiments. Good agreement between predicted (through computer simulation) and observed (through short-shot experiments and transducer response) results is obtained for free surface shapes and free surface locations with time. The theoretical pressure predictions are in fairly good agreement with experiments, with the maximum deviations occurring towards the end of filling and for longer filling times. This points towards the possibility that wall solidification during filling interacts with the flow processes across the gap of the cavity and makes necessary a more detailed characterization of the heat transfer at the melt/mold interface.     

Estimation of linear trend onset in time series

We propose a method to detect the onset of linear trend in a time series and estimate the change point T from the profile of a linear trend test statistic, computed on consecutive overlapping time windows along the time series. We compare our method to two standard methods for trend change detection and evaluate them with Monte Carlo simulations for different time series lengths, autocorrelation strengths, trend slopes and distribution of residuals. The proposed method turns out to estimate T better for small and correlated time series. The methods were also applied to global temperature records suggesting different turning points.     

Providing effective feedback, monitoring and evaluation to on-line collaborative learning discussions

Learning and knowledge building have become critical competences for people in the knowledge society era. In this paper, we propose a sociolinguistic dialogue model for understanding how learning evolves and how cognitive process is constructed in on-line discussions. The knowledge extracted from this model is used to assess participation behavior, knowledge building and performance. The ultimate purpose is to provide effective feedback, evaluation and monitoring to the discussion process. Seven hundred students from the Open University of Catalonia in Spain participated in this study. Results showed that learning and knowledge building may be greatly enhanced by presenting selected knowledge to learners as for their particular skills exhibited during interaction. In addition, this valuable provision of information is used as a meta cognitive tool for tutors and moderators for monitoring and evaluating the discussion process more conveniently. This contribution presents our conceptual model for interaction management as well as key design guidelines and evaluation results. Implications of this study are remarked and further research directions are proposed.     

Experimental Investigation of Nonconventional Confinement for Concrete Using FRP

The present study investigates experimentally the behavior of concrete confined with fiber reinforced polymers (FRP) in the form of jackets which are applied according to a number of nonconventional techniques. First, the effectiveness of various jacketing configurations combined with anchors as a measure of increasing the strength and deformability of L-shaped columns is investigated. It is concluded that easy to install and low-cost anchors made of resin impregnated fibers properly placed at the reentrant corner of L-shaped columns enable excellent mobilization of confining stresses supplied by the FRP jackets. Next, a number of alternative confinement methods are investigated on concrete cylinders, aimed at quantifying the effectiveness of (1) unbonded jacketing, (2) spirally applied strips attached only at their ends, and (3) jacketing directly on concrete with mortar plastering. Although the study may be regarded as preliminary, it provides useful experimental support to a number of techniques which have the potential to open new horizons in the field of externally applied FRP for enhancing concrete confinement.     

Optimizing download time of embedded multimedia objects for Web browsing

Notoriously high delays in accessing Web pages loaded with massive multimedia objects are highly undesirable. Inspired by the requirements of news agencies and other information providers to include multimedia content in their pages, this paper proposes a new solution to the problem of minimizing the Web response time. We consider an environment that consists of a central multimedia repository and various sites physically dispersed. Our approach is based on simultaneous downloading of some of the embedded multimedia objects from the repository, and the rest from the regional servers. We propose a cost model to formalize the relative benefits of the proposed scheme, and design an algorithm that replicates multimedia objects so as to take advantage of concurrency in data transferring. An extensive simulation study evaluates the performance of the proposed replication policy under storage and processing capacity constraints, as well as with various network transfer rates. Comparisons are carried out with alternative schemes.     

Truly meshless localized type techniques for the steady-state heat conduction problems for isotropic and functionally graded materials

A numerical solution of steady-state heat conduction problems is obtained using the strong form meshless point collocation (MPC) method. The approximation of the field variables is performed using the Moving Least Squares (MLS) and the local form of the multiquadrics Radial Basis Functions (LRBF). The accuracy and the efficiency of the MPC schemes (with MLS and LRBF approximations) are investigated through variation (i) of the nodal distribution type used, i.e. regular or irregular, ensuring the so-called positivity conditions, (ii) of the number of nodes in the total spatial domain (TD), and (iii) of the number of nodes in the support domain (SD). Numerical experiments are performed on representative case studies of increasing complexity, such as, (a) a regular geometry with a constant conductivity and uniformly distributed heat source, (b) a regular geometry with a spatially varying conductivity and non-uniformly distributed heat source, and (c) an irregular geometry in case of insulation of vapor transport tubes, as well. Steady-state boundary conditions of the Dirichlet-, Neumann-, or Robin-type are assumed. The results are compared with those calculated by the Finite Element Method with an in-house code, as well as with analytical solutions and other literature data. Thus, the accuracy and the efficiency of the method are demonstrated in all cases studied.     

CoopMAC: A Cooperative MAC for Wireless LANs

Due to the broadcast nature of wireless signals, a wireless transmission intended for a particular destination station can be overheard by other neighboring stations. A focus of recent research activities in cooperative communications is to achieve spatial diversity gains by requiring these neighboring stations to retransmit the overheard information to the final destination. In this paper we demonstrate that such cooperation among stations in a wireless LAN (WLAN) can achieve both higher throughput and lower interference. We present the design for a medium access control protocol called CoopMAC, in which high data rate stations assist low data rate stations in their transmission by forwarding their traffic. In our proposed protocol, using the overheard transmissions, each low data rate node maintains a table, called a CoopTable, of potential helper nodes that can assist in its transmissions. During transmission, each low data rate node selects either direct transmission or transmission through a helper node in order to minimize the total transmission time. Using analysis, simulation and testbed experimentation, we quantify the increase in the total network throughput, and the reduction in delay, if such cooperative transmissions are utilized. The CoopMAC protocol is simple and backward compatible with the legacy 802.11 system. In this paper, we also demonstrate a reduction in the signal-to-interference ratio in a dense deployment of 802.11 access points, which in some cases is a more important consequence of cooperation     

Book reviews

Books reviewed in this article:
Travel Demand Management and Public Policy. Erik Ferguson.
Self-Organization and the City. Juval Portugali (in collaboration with A. Alafasi, I. Benenson, H. Haken, I. Omer). Foreword by Herman Haken.
Growth, Employment and Migration in Southeast Asia: Structural Change in the Greater Mekong Countries. Prema-chandra Athukorala, Chris Manning, Piyasiri Wickramasekara. Cheltenham, U.K.