Fabrication of gas sensing devices with ZnO nanostructure by the low-temperature oxidation of zinc particles

A method for low-temperature synthesis of a mixture of high-density ZnO nanoflakes and nanowires was developed to produce low-cost and high-efficiency gas sensors with ZnO nanostructures. ZnO nanoflakes and nanowires were grown on glass substrates by the RF sputter deposition of Zn particles and localized oxidation at a low temperature of 300 °C. The synthesized ZnO nanoflakes and nanowires were polycrystalline and had nanometer dimensions, as revealed by X-ray diffraction (XRD) and field emission scanning electron microscope (FESEM) measuring. A gas sensor based on the mixture of ZnO nanoflakes/nanowires responded rapidly and sensitively to ethanol. The sensing properties of the ZnO nanostructure sensor were approximately 72% for 50 ppm ethanol gas at an operating temperature of 100 °C. The response to 10 ppm of ethanol gas was 42% at the same temperature.     

p-Cu2O-shell/n-TiO2-nanowire-core heterostucture photodiodes

This study reports the deposition of cuprous oxide [Cu2O] onto titanium dioxide [TiO2] nanowires [NWs] prepared on TiO2/glass templates. The average length and average diameter of these thermally oxidized and evaporated TiO2 NWs are 0.1 to 0.4 μm and 30 to 100 nm, respectively. The deposited Cu2O fills gaps between the TiO2 NWs with good step coverage to form nanoshells surrounding the TiO2 cores. The p-Cu2O/n-TiO2 NW heterostructure exhibits a rectifying behavior with a sharp turn-on at approximately 0.9 V. Furthermore, the fabricated p-Cu2O-shell/n-TiO2-nanowire-core photodiodes exhibit reasonably large photocurrent-to-dark-current contrast ratios and fast responses.     

Highly sensitive ZnO nanowire CO sensors with the adsorption of Au nanoparticles

In this study, the growth of high density single-crystalline ZnO nanowires on patterned ZnO:Ga/SiO(2)/Si templates was reported. We also adsorbed Au nanoparticles onto nanowire surfaces and fabricated ZnO nanowire CO sensors. With 50?ppm CO gas, it was found that we could enhance the device sensitivities at 350?°C from 4.2% to 46.5% by the adsorption of Au nanoparticles. It was also found that measured sensitivities were around 30%, 37%, 46.5% and 53% when concentration of the injected CO gas was 5, 20, 50 and 100?ppm, respectively.     

A ZnO nanowire vacuum pressure sensor

In this study, we report the growth and characterization of lateral ZnO nanowires (NWs) on ZnO:Ga/glass templates. Using x-ray diffraction and micro-Raman spectroscopy, it was found that crystal quality of the as-grown ZnO NWs is good. It was also found that the average length and average diameter of the laterally grown ZnO NWs were 5?μm and 30?nm, respectively. A vacuum pressure sensor was then fabricated using a single NW bridging across two electrodes. By measuring the current-voltage characteristics of the samples at low pressure, we found that the currents were of 17, 34.28, 57.37 and 96.06?nA for the ZnO NW measured at 1 × 10(-3)?Torr, 1 × 10(-4)?Torr, 3 × 10(-5)?Torr and 5 × 10(-6)?Torr, respectively. These values suggest that the laterally grown ZnO NWs prepared in this study are potentially useful for vacuum pressure sensing.     

Crabwise ZnO nanowires: growth and field emission properties

Crabwise ZnO nanowires with an average length of 5 microm and an average diameter of 30 nm were selectively grown on ZnO:Ga/glass templates. Cathodoluminescence measurement indicated that the crystal quality of the crabwise ZnO nanowires was good. With an applied voltage of 120 V, the crabwise ZnO nanowire field emitters gave an emission current of 0.1 mA/cm2. Moreover, the field enhancement factor, beta, of the crabwise ZnO nanowires was approximately 980.