Design of one-dimensional ferromagnet based on polyacetylene chain

As a model for organic ferromagnetism in a one-dimensional system, substituted polyacetylenes are re-considered on the basis of the molecular orbital (MO) and the crystal orbital (CO) methods. The semiempirical MO calculations with configuration interaction for the dimer model show that the exchange interaction on poly[(4-oxyphenyl)acetylene] (1) is negative in spite of Ovchinnikov's prediction, due to the direct interaction between the adjacent pendant spins. On the other hand, it is shown that a polyacetylene chain with phenoxy radicals as pendants on every other active site can become a one-dimensional feromagnet. Moreover, the CO calculations by means of the unrestricted Hartree-Fock method give a theoretical background for the realization of a ground state with macroscopic spin alignment on the improved model chain.     

Activation of a Au/TiO2 Catalyst by Loading a Large Amount of Fe–Oxide: Oxidation of CO Enhanced by H2 and H2O

Catalytic activity of a 1 wt% Au/TiO₂ catalyst is markedly improved by loading a large amount of FeO_x, on which the oxidation of CO in excess H₂ is selectively promoted at temperature lower than 60 °C. Oxidation of CO with O₂ on the FeO_x/Au/TiO₂ catalyst is markedly enhanced by H₂, and H₂O moisture also enhances the oxidation of CO but its effect is not so large as the promotion by H₂. We deduced that activation of Au/TiO₂ catalyst by loading FeO_x is not caused by the size effect of Au particles but a new reaction path via hydroxyl carbonyl intermediate is responsible for the superior activity of the FeO_x/Au/TiO₂ catalyst.     

Dummy humanoid robot simulating several trunk postures and abdominal shapes – Report of element technologies

Development of clothing in consideration of the shape and body function of a person with spinal cord injury is an important task. Then, a dummy robot with a deformation mechanism was developed in this study for evaluating the comfortable level of clothings. Specifically, a trunk joint mechanism and an abdominal mechanism that can realize various deformations of the abdominal area and various trunk poses were developed. The trunk joint mechanism was implemented in order to simulate the seated posture of persons with spinal cord injury. The abdominal deformation mechanism was implemented using linear actuators and rotating servomotors in order to simulate abdominal obesity of persons with spinal cord injury. Further, a tactile sensor system was developed for measuring the clothing pressure on the abdominal area and evaluating the comfort or discomfort of clothing.     

Ultrasonic densitometer using a multiple reflection technique

This work presents recent improvements in a density measurement cell with a double-element transducer that can eliminate diffraction effects. A new mechanical design combined with the use of more appropriate materials has resulted in better parallelism between interfaces, more robust assembly, and chemical resistance. A novel method of signal processing, named the energy method, is introduced to obtain the reflection coefficient, reducing sensitivity to noise and improving accuracy. The measurement cell operation is verified both theoretically, using an acoustic wave propagation model, and experimentally, using homogeneous liquids with different densities. The accuracy in the density measurement is 0.2% when compared with the measurements made with a pycnometer.     

Preparation of HPLC test solutions for organic impurities in aluminum lakes of food red no. 40 (allura red AC) and food yellow no. 5 (sunset yellow FCF)

The HPLC determination of organic impurities in Food Red No. 40 aluminum lakes (R-40Als) as directed by Japan's Specifications and Standards for Food Additives, 7th Ed. (JSFA-VII), has problems, such as reproducibility and low recovery. ICP analyses suggested that the problem was caused by the aluminum in the test solution. In the improved method for preparation of the test solution, aluminum was precipitated as a hydroxide gel by boiling with 1% aqueous ammonia. After centrifugation, the supernatant was used for the HPLC analysis of the organic impurities in the lakes. Recoveries of organic impurities were more than 85% from R-40Al spiked at the 0.1 and 1.0% levels of R-40. The proposed method was also adapted for Food Yellow No. 5 aluminum lakes.     

XPS analysis of CdS/CuInSe2 heterojunctions

CdS/CuInSe₂ (CIS) heterojunctions were investigated by XPS analysis. An In-excess layer which may form an ordered vacancy compound (OVC) was present at the as-deposited CIS surface and it remained after chemical bath deposition of a CdS layer. The In-excess layer was removed by preferential etching with NH₃ aqueous solution. This result implies that the surface of the as-deposited CIS film was converted from the OVC with n-type conductivity into the CIS with p-type by NH₃ treatment. The conduction band offsets at the CdS/p-CIS and CdS/n-OVC were determined to be 1.0 and 0.3 eV, respectively. The CIS solar cells fabricated with n-OVC surface layer exhibited higher cell efficiencies than those fabricated with p-CIS surface layer.     

Effects of CdS buffer layers on photoluminescence properties of Cu(In,Ga)Se2 solar cells

Photoluminescence (PL) have been studied on Cu(In,Ga)Se₂ (CIGS) thin films, CdS/CIGS and CIGS solar cells, to clarify the carrier recombination process. The chemical-bath deposition (CBD) of the CdS buffer layer on the CIGS thin film leads to (i) the enhancement of near-band-edge PL intensity by a factor of 2–3, (ii) change in energy of the defect-related PL and (iii) the slight change in the decay time. They are related not only to the minimization of the surface recombination but also to the modification of native defects at the Cu-poor surface of CIGS by the occupation of Cd atom at the Cu site. A donor–acceptor pair PL at low-temperature and temperature-dependent PL have been studied. They are discussed in terms of the impurity and defect levels created in the CIGS film during the CBD-CdS process.     

Forensic evaluation of clothing flammability

A set of 17 commercial garments were purchased, categorized based on their fabric composition and fire tested. Three fire exposures were used: (a) a simile of the United States regulatory test for apparel fabrics (16CFR1610), (b) a small vertical candle on a small swatch of fabric and (c) a candle applied to a full garment, placed on a mannequin. Comparisons were made between the results of the various tests and of the various fabrics tested. A general correlation was observed whereby increased fabric areal density [weight/unit fabric area] resulted in improved fire performance. Where outliers to this generalization were observed the improved fire performance was due to the superior inherent fire performance of specific fabric types such as silk. Overall, the quantitative behavior with regard to flame spread rate observed after ignition of cellulosic, thermoplastic and blended fabrics was more heavily dependent on fabric areal density than on their chemical composition. Two key conclusions are that very lightweight fabrics constitute a potential danger and that the United States regulatory value, set at 88.3g/m² (2.6oz/yd²), represents an essentially arbitrary cut‐off in this regard. Copyright © 2009 John Wiley & Sons, Ltd.