The beginning of immigrant settlement in the Helsinki metropolitan area and the role of social housing

Finland has experienced a rapid increase inimmigration since the beginning of the 1990s.Almost half of the foreign population isconcentrated in the metropolitan area of thecapital, Helsinki. The development andexplanations of their settlement patterns havenot yet been thoroughly studied. It ishypothesised in this study that social housingcan explain the settlement patterns. Indices ofdissimilarity were calculated to study thelevel and development of spatial segregation ofimmigrant groups in the Helsinki metropolitanarea in 1995–99, and the association betweenthe settlement patterns of immigrants andsocial housing was studied by regressionanalysis. Neighbourhood-level data were used.The results indicate that the Helsinkimetropolitan area has avoided extreme ethnicsegregation so far and that segregation isdecreasing. Especially immigrants from poorcountries are clearly associated with socialhousing in their settlement patterns, evenafter adjustment for socio-economic anddemographic differentiation. Also newconstruction of social housing seems to haveaffected the spatial distribution of thisgroup. Despite this dependence, the group isnot extremely segregated, which is probablybecause the social housing sector is nottotally marginalised.     

Continuous precipitation of calcium sulfate dihydrate from waste sulfuric acid and lime

Precipitation of calcium sulfate dihydrate, gypsum, from (i) a pure sulfuric acid/lime suspension and (ii) a waste sulfuric acid/lime suspension in a continuous pilot plant in the temperature range from 40 °C to 80 °C was studied. It was observed that in the case of waste sulfuric acid with a high content of Mg²⁺ and Fe²⁺ ions, several hours after the beginning of the precipitation, partial dissolution of the product and modification of the crystals from needle‐ and plate‐like to agglomerated structures occurred. It is suggested that the secondary changes occur due to the increased concentration of Mg²⁺ and Fe²⁺ ions in the reactor. Below 60 °C, and above 70 °C plate‐like and needle‐like single crystals respectively were formed. The mean size (d₅₀) of the crystals was found to increase with increasing temperature and decrease with the initial concentration of lime. Gypsum produced between 70 °C and 80 °C is suitable for further processing for construction plaster. In a precipitation process with pure sulfuric acid only single perfect needle‐like crystals occurred. Copyright © 2005 Society of Chemical Industry     

AHMED experiments on hygroscopic and inert aerosol behaviour in LWR containment conditions: experimental results

Hygroscopic NaOH, CsI, CsOH and inert Ag aerosol behaviour at different temperatures and relative humidities (RH) has been studied in a well instrumented and controlled vessel of 1.81 m³ total free volume. Homogeneous thermal-hydraulic conditions for aerosol measurement in the vessel were achieved. The aerosol number and mass concentration were measured continuously during the experiments using a Condensation Nucleus Counter and a Tapered Element Oscillating Microbalance. The particle size distribution and chemical composition in the test conditions were measured by Berner low pressure impactors. In the case of NaOH the half life of the aerosol mass concentration was more than four times longer at low RH (22%) as compared to high RH (96%). The half lives of the CsOH and CsI aerosols were only twice as long at low RH as compared to high RH. Thus at high RH (96–97%) the half lives of CsOH and CsI were twice as long as the half life for the NaOH aerosol. The faster decay of the NaOH aerosol is due to the smaller density decrease of NaOH during water condensation. CsOH particles grew rapidly to their equilibrium size at all humidities. The measured equilibrium size for CsOH aerosol agree well with the calculated particle size at different RHs. Experimental results were also compared with calculations obtained by severe accident computer codes. These calculated results will be presented in a later paper.     

Wood inspection with non-supervised clustering

Abstract. The appearance of sawn timber has huge natural variations that the human inspector easily compensates for mentally when determining the types of defects and the grade of each board. However, for automatic wood inspection systems these variations are a major source for complication. This makes it difficult to use textbook methodologies for visual inspection. These methodologies generally aim at systems that are trained in a supervised manner with samples of defects and good material, but selecting and labeling the samples is an error-prone process that limits the accuracy that can be achieved. We present a non-supervised clustering-based approach for detecting and recognizing defects in lumber boards. A key idea is to employ a self-organizing map (SOM) for discriminating between sound wood and defects. Human involvement needed for training is minimal. The approach has been tested with color images of lumber boards, and the achieved false detection and error escape rates are low. The approach also provides a self-intuitive visual user interface. Received: 16 December 2000 / Accepted: 8 December 2001 Correspondence to: O. Silvén     

Mapping the Characteristics of a 'Good' Play Therapist.

In this pilot study, concept mapping, a methodological approach combining qualitative and quantitative analytic strategies, was used to identify the therapist qualities, competencies, and skills necessary for effective play therapy outcomes as perceived by a sub-sample of 28 experienced play therapists who are members of the Association for Play Therapy (APT). The clusters associated with the therapeutic relationship and facilitative skills (e.g., empathy, warmth, and genuineness) were rated as the most essential skills to possess and also as the most difficult to develop. In contrast, the clusters associated with play therapy interventions and theories were rated as the least important skills to possess but as the easiest to acquire. The findings are discussed, with implications for therapeutic practice, research, and policy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Fluage à long terme du bois fléchi en grandeur structurale

Résumé Cet article présente un modèle permettant de calculer le fluage de poutres fléchies de différentes sections soumises à des environnements variables en ce qui concerne l'humidité relative. Ce modèle est utilisé ici pour interpréter de nouveaux essais à long terme sur des poutres en bois massif et lamellé-collé qui ont été chargées pendant plus de 800 jours en conditions extérieures sous abri à Paris

---

Summary Long term bending experiments on full size timber and glulam beams have been carried out under external and sheltered climatic conditions in Paris, and more than two years of test results on the creep behaviour of 75 beams are available. A model for predicting the long term mechanical behaviour of timber under variable humidity and load conditions, previously developed by the author, is described. The model is based on transient moisture transfer analysis linked with deformation analysis using a step-by-step computation scheme, and has been compared previously with experiments carried out under laboratory conditions of controlled variable climates by the author as well as with test results obtained from several other institutions. In general, the model has agreed satisfactorily with the experimental results. In the present paper the model is compared with experiments on full size beams carried out under the changeable conditions of a natural climate. The results show that, for low stress levels and corresponding loads, the model provides a reasonable prediction of the end creep levels after two years of loading.

     

Unambiguous atomic structural determination of single-walled carbon nanotubes by electron diffraction

We introduce a novel non-dimensional “intrinsic layer-line spacing” concept for electron diffraction analysis of single-walled carbon nanotubes (SWCNTs). Accordingly, we develop a unique method for direct determination of chiral indices (n, m) of the carbon nanotubes from their electron diffraction patterns (EDPs). The new method is totally calibration-free. Errors due to the nanotube inclination are specified. The tilt angle of the carbon nanotube with respect to the incident electron beam is simultaneously evaluated, thus the effect of the tube tilting is compensated for in the (n, m) determination. Several effective procedures are proposed to cross-check the results by using abundant information contained in the diffraction patterns. The efficiency of the method is demonstrated on both simulated and experimental diffraction patterns from single-walled nanotubes. The technique can be extended to structural analysis of nanotubes of structure similar to carbon nanotubes, such as boron nitride nanotubes.     

Carbon nanotubes and onions from carbon monoxide using Ni(acac)2 and Cu(acac)2 as catalyst precursors

New catalyst precursors (copper and nickel acetylacetonates) have been used successfully for the synthesis of carbon nanotubes and onion particles from carbon monoxide. Catalyst nanoparticles and carbon products were produced by metal-organic precursor vapour decomposition and catalytic disproportionation of carbon monoxide in a laminar flow reactor at temperatures between 705 and 1216 °C. Carbon nanotubes (CNTs) were formed in the presence of nickel particles at 923-1216 °C. The CNTs were single-walled, 1-3 nm in diameter and up to 90 nm long. Hollow carbon onion particles (COPs) were produced in the presence of copper particles at 1216 °C. The COPs were from 5 to 30 nm in diameter and consisted of several concentric carbon layers surrounding a hollow core. The results of computational fluid dynamics calculations to determine the temperature and velocity profiles and mixing conditions of the species in the reactor are presented. The mechanisms for the formation of both CNTs and COPs are discussed on the basis of the experimental and computational results.     

Carousel interferometer

A new type of a swinging interferometer, the carousel interferometer, is presented, and its properties are studied and compared with other swinging interferometers. The new interferometer is built with five plane mirrors. The optical path difference is accomplished by rotation of a system that consists of four mirrors. The modulation is almost independent of the scanning of the interferometer. It is not sensitive to external perturbations such as bending or other deformations of the mount. The construction is very compact. Because of its stability and low cost it is very applicable to small Fourier-transform spectrometers for any wave-number region from the far infrared down to the ultraviolet.     

Floating Catalyst Chemical Vapor Deposition Patterning Nitrogen-Doped Single-Walled Carbon Nanotubes for Shape Tailorable and Flexible Micro-Supercapacitors

Micro-supercapacitors (MSCs) as high-power density energy storage units are designed to meet the booming development of flexible electronics, requiring simple and fast fabrication technology. Herein, a fast and direct solvent-free patterning method is reported to fabricate shape-tailorable and flexible MSCs by floating catalyst chemical vapor deposition (FCCVD). The nitrogen-doped single-walled carbon nanotubes (N-SWCNTs) are directly deposited on a patterned filter by FCCVD with designable patterns and facilely dry-transferred on versatile substrates. The obtained MSCs deliver an excellent areal capacitance of 3.6 mF cm⁻² and volumetric capacitance of 98.6 F cm⁻³ at a scan rate of 5 mV s⁻¹ along with excellent long-term cycle stability over 125 000 circles. Furthermore, the MSCs show good performance uniformity, which can be readily integrated via connection in parallel or series to deliver a stable high voltage (4 V with five serially connected devices) and large capacitance (5.1 mF with five parallel devices) at a scan rate of 100 mV s⁻¹, enabling powering the light emitting displays. Therefore, this method blazes the trail of directly preparing flexible, shape-customizable, and high-performance MSCs.