Stability analysis of continuous-time periodic systems via theharmonic analysis

Asymptotic stability of finite-dimensional linear continuous-time periodic (FDLCP) systems is studied by harmonic analysis. It is first shown that stability can be examined with what we call the harmonic Lyapunov equation. Another necessary and sufficient stability criterion is developed via this generalized Lyapunov equation, which reduces the stability test into that of an approximate FDLCP model whose transition matrix can be determined explicitly. By extending the Gerschgorin theorem to linear operators on the linear space l₂, yet another disc-group criterion is derived, which is only sufficient. Stability of the lossy Mathieu equation is analyzed as a numerical example to illustrate the results     

A general framework for debugging

The state of the art of debugging is examined. A debugged process model that serves as the basis of a general debugging framework is described. The relationship of the model to traditional debugging processes and support tools is discussed. A minimal set of requirements for a general debugging framework is described in terms of both the theory behind debugging methodologies and the support tools. An execution monitor, Eden, that serves as a debugging tool within this general framework is described     

Enhancement by ganglioside GT1b of annexin I phosphorylation in bovine mammary gland in the presence of phosphatidylserine and Ca2+

Ganglioside GT1b and, to a lesser extent, GD3, enhanced phosphorylation of a 36 kDa protein (the substrate of protein kinase C) in the particulate fraction from bovine mammary gland. Sialic acids, asialogangliosides, and GM3 were without effect, and GD1a conversely inhibited phosphorylation of the 36 kDa protein. The enhanced phosphorylation by GT1b required the simultaneous presence of phosphatidylserine (PS) and Ca²⁺. The 36 kDa protein reacted with anti-annexin I in Western blot analysis. Addition of purified annexin I to the reaction mixture containing the particulate fraction increased the extent of phosphorylated 36 kDa protein, and the phosphorylation was further enhanced by GT1b. The enhanced phosphorylation of annexin I by GT1b was also dependent on PS and Ca²⁺. When annexin I was phosphorylated by purified protein kinase C, GT1b inhibited the annexin I phosphorylation. Addition of epidermal growth factor or insulin to the particulate fraction had little effect on the enhancement. These results suggest that an enzyme or enzymes other than protein kinase C, epidermal growth factor receptor kinase, or insulin receptor kinase is responsible for the GT1b- and GD3-enhanced phosphorylation of annexin I in the presence of PS and Ca²⁺.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Microscopic fatigue processes in a plain-weave glass-fibre composite

This paper focuses on the microscopic damage and progressive failure of a composite reinforced by plain-weave glass cloth under tensile fatigue loading. The fatigue process was divided into three stages like that of multi-directional laminates. It was found that the internal damage at each stage (matrix cracks, debonds in the weft, successive debonds in the warp and ‘metadelaminations’ between warps and wefts) occurred near the cross-over point of the fabric. The modulus decay mechanism was explained by considering the progression of this internal damage. From the end of the first stage to the beginning of the middle stage, a characteristic damage state (CDS) (called a ‘meta-CDS’) was observed. It was found that woven composites have a unit area of damage accumulation (called a ‘unit cell’) and the damage of each unit cell and its distribution control the total fatigue damage of the material.     

A compact full MMIC module for Ku-band phase-lockedoscillators

A compact Ku-band phase-locked oscillator module has been developed in a full MMIC (monolithic microwave integrated circuit) configuration. The module includes an MMIC voltage-controlled oscillator, an analog frequency divider, and interstage amplifiers. The constituent monolithic chips are integrated in a very small single-package module and operate at the target frequencies without any external trimming or matching network. The oscillator is tuned more than 1 GHz with a constant output amplitude. The frequency-divided output is also obtained over the whole tuning range. Spurious output is not found at any frequency up to 22 GHz. In spite of the very low-Q factor of GaAs monolithic circuitry, the oscillator phase noise exhibited is less than -80 dBc/Hz, due to the high-gain, high-speed phase lock     

Numerical analyses of high‐beta spherical tokamaks with varied elongation

The effect of plasma elongation on the second‐stable spherical tokamak (ST) was numerically studied using the experimentally measured pressure and current profiles of ultrahigh‐beta STs. The maximum beta of ST over 50% was obtained in the TS‐3 ST/CT experiment by applying an external toroidal field to an FRC. It was found that the marginal beta for the ballooning instability increased with the plasma elongation κ of ST. The elongated STs with κ > 2 have the magnetic shear (S)–pressure gradient (α) profiles located in the second‐stable regime for the ballooning mode and the stability margin increased with κ. The close relation between the absolute minimum‐B profile and the second stability was documented. The effect of elongation on maximum beta was observed to saturate when κ exceed 3, indicating that the optimized elongation for high‐beta STs is located around 2 < κ < 3. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(4): 1–6, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20132     

A video DSP with a macroblock-level-pipeline and a SIMD typevector-pipeline architecture for MPEG2 CODEC

A video DSP with macroblock-level-pipeline and a SIMD type vector-pipeline architecture (VDSP2) has been developed, using 0.5 μm triple-layer-metal CMOS technology. This 17.00 mm×15.00 mm chip consists of 2.5 M transistors, and operates at 100 MHz. The real-time encoder and decoder specified in the MPEG2 main profile at the main level can be realized with two VDSP2's and a motion estimation (ME) unit, and one VDSP2 respectively, at an 80 MHz clock rate, with a total power dissipation of 4.2 W at 3.3 V