Carbonization of coals into anisotropic cokes: 7. Copreheat-treatment under short contact-time conditions at high temperature

The copreheat-treatment of non-fusible and slightly fusible coals with A240 and hydrogenated A240 under high temperature-short contact-time conditions around 500 °C has been examined in an attempt to produce a formed coke with better anisotropic development. These conditions shortened the copreheat-treatment time and provided better anisotropic development in the resultant coke after carbonization. Effectiveness of short contact-time has been discussed in terms of the extent of depolymerization of coal molecules suitable for anisotropic development, this being related to coal liquefaction under similar conditions.     

Hydrogen absorption by Pd-coated ZrNi prepared by using Barrel-Sputtering System

To improve the durability of hydrogen storage materials against surface poisoning by impurity gases, effectiveness of Pd-coating layer prepared by using a Barrel-Sputtering System was examined for ZrNi powder. The effectiveness of Pd-coating was evaluated by activation temperature, at which Pd/ZrNi poisoned by air could be activated to absorb hydrogen. Characterization of Pd-coated ZrNi (denoted as Pd/ZrNi) by scanning electron microscopy, electron probe microanalysis and X-ray diffraction showed that a uniform Pd-coating layer was formed with the barrel-sputtering system. It was found that the poisoned Pd/ZrNi sample could be activated even at 423 K to absorb hydrogen at room temperature. This exhibits remarkable contrast to bare ZrNi, which could be only activated appreciably above 1073 K. It is concluded that the Pd-coating by barrel sputtering is quite effective to avoid the effect of surface poisoning of powdery hydrogen storage materials. However, the activation at excessively high temperature resulted in the loss of high activity to absorb hydrogen. It was concluded that this phenomenon was associated with reactions between Pd and ZrNi to form PdZr and other byproducts.     

Solution structure of bromelain inhibitor IV from pineapple stem: structural similarity with Bowman-Birk trypsin/chymotrypsin inhibitor from soybean

Bromelain inhibitor VI from pineapple stem (BI-VI) is a unique double-chain inhibitor with an 11-residue light chain and a 41-residue heavy chain by disulfide bonds and inhibits the cysteine proteinase bromelain competitively. The structure of BI-VI in aqueous solution was determined using nuclear magnetic resonance spectroscopy and simulated annealing-based calculations. Its three-dimensional structure was shown to be composed of two distinct domains, each of which is formed by a three-stranded antiparallel beta-sheet. Unexpectedly, BI-VI was found to share a similar folding and disulfide bond connectivities not with cystatin superfamily inhibitors which inhibit the same cysteine proteinases but with the Bowman-Birk trypsin/chymotrypsin inhibitor from soybean (BBI-I). BBI-I is a 71-residue inhibitor which has two independent inhibitory sites toward the serine proteinases trypsin and chymotrypsin. These structural similarities with BBI-I suggest that they have evolved from a common ancestor and differentiated in function during a course of molecular evolution.     

Annealing behavior of Ar ion irradiated Bi2Sr2Can-1CunO4+2n superlattice and intergrowth films

Artificially layered Bi₂Sr₂Ca_n–1Cu_nO_4+n films were synthesized by sequential sputter deposition of BiO, SrCu_0.5O_1.5 and CaCuO₂ layers. Annealing behavior of these films which were irradiated by Ar ions was studied. Defect assisted improvement of their crystalline perfection is expected which might results in the improvement of the superconducting properties of these films. An artificial film, such as an intergrowth of 2223 and 2234 phases, and superstructure films of (2245)₁(2201)₁ and (2234)₁(2212)₁, were irradiated by Ar ions (150 keV, 2–10×10¹² ions/cm₂) and annealed at 730 °C. An improvement of superconducting transition temperatures were observed.     

Effects of Particle Size of Bulk Drug and food on the Bioavailability of U-78875 in Dogs

The effects of particle size and food on the absolute bioavailability of U-78875 in dogs after oral administration of either a suspension or tablet dosage form were investigated. A reduction of particle size caused a significant increase in bioavailability along with an increase in dissolution rate. Additionally, both suspension and tablet dosage forms administered after food caused an increase in bioavailability. Thus, to accelerate drug dissolution, a reduction of U-78875 particle size from the unmilled state is important for the optimization of formulation compositions. To increase the bioavailability of U-78875, postprandial dosing should be considered.     

High-frequency ultrasonic cleaning tank utilizing oblique incidence

Transmission characteristics of a double-structured tank, used for high-frequency (1 MHz range) ultrasonic cleaning of semiconductor wafers and substrates, were improved by utilizing oblique incidence of ultrasonic waves. As the sound transmittivity through a plate in water varies with the angle of incidence, the bottom of the Pyrex glass inner container was slanted at the angle where strong transmission occurred. In the slant-bottom container, an intensive and uniform sound pressure distribution was measured with a polyvinylidene fluoride (PVDF) hydrophone probe. In comparison with the conventional horizontal-bottom container, it was shown that the distributions as well as amplitude of sound pressure were remarkably improved by slanting the bottom of the inner container at the proper angle     

Current collecting efficiency of micro tubular SOFCs

In this study, current collecting efficiency of the micro tubular solid oxide fuel cell (SOFC) was estimated to determine optimum size of the micro tubular SOFC. Two models for collecting current from single terminal (ST) and double terminal (DT) of anode tube were proposed and used to calculate the current collecting efficiency as functions of anode thickness, tube length and operating temperature. It was shown that design of the cell geometry and current correcting method are significantly important to achieve high performance micro tubular SOFC stacks. The efficiency loss estimated from the DT model was about 2–4-fold lower than those of obtained from the ST model. The DT model was shown to be more effective for higher operating temperature and the tube length.     

Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Determination of hydroperoxides and structures by high-performance liquid chromatography with post-column detection with diphenyl-1-pyrenylphosphine

A high-performance liquid chromatographic method, using post-column detection with diphenyl-1-pyrenyl-phosphine (DPPP), was developed for the quantitative and qualitative determination of isomeric lipid hydroperoxides (OOH). The OOH eluted from a normal-phase column were passed through a photodiode array detector and then mixed with DPPP solution in a reaction coil heated at 80°C. DPPP oxide formed by the reaction with OOH was determined by monitoring the fluorescence intensity at 380 nm and excitation at 352 nm. The conjugated diene OOH (13-cis, trans- and 9-cis, trans-OOH) and nonconjugated OOH (12-cis-trans- and 10-cis, trans-OOH) from photosensitized oxidation of methyl linoleate were determined in a molar ratio of 31∶29∶19∶21, respectively. However, only the two conjugated hydroperoxides were detected by ultraviolet absorption at 234 nm. Further applications were carried out for the determination of OOH of methyl oleate and methyl linolenate. This method proved to be useful for the determination of the OOH containing both conjugated and nonconjugated diene structures.