Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Correlation between motion of source bender element and feedback signal induced by self-monitoring

Since the introduction of bender element tests to soil testing, the reliability of the estimated travel time has been the most serious problem. The author has previously shown a potential solution whereby removing the response of the bender element subsystem from the whole response could dramatically improve the accuracy of the travel time estimation. In order to lay the foundation for estimating the response of the bender element subsystem, this paper examines the correlation between the displacements of the element and the induced feedback signals by employing a self-monitoring element. The response of the self-monitoring element is modeled as a transfer function involving two internal transfer functions that relate the input signals to the displacements and the displacements to the feedback signals, respectively. Using a laser displacement sensor, the displacements are directly measured through the entire surface and reveal the three-dimensional bending motion of the element oscillating in both longitudinal and width directions. The feedback signals are similar to, but inconsistent with, the tip displacements, and an attempt is made to correct the feedback signals. Finally, a conclusion is given on the potential for estimating the response of the bender element subsystem using the self-monitoring element.     

二垩英与资源回收-Ⅰ考虑到二垩英生成的资源与能量回收基础研究

目前在日本,存在大量工业垃圾,包括各种塑料制品,ASR(汽车破碎垃圾),含有毒PCB(多氯联苯)的110变压器和PVC(聚氯乙稀)制品等.而来自城市垃圾焚烧炉的废气含有大量能量.因此,在充分考虑环境、避免二垩英生成的同时,安全回收来自工业垃圾、城市和/或工业垃圾焚烧炉的资源和能量是个非常重要的课题,这也将对抑制CO2排放作出贡献.正确地阐明焚烧过程中二垩英的生成机理及详细研究含少量二垩英的焚烧废气在冷却过程中大量形成二垩英的临界温度是项很重要的工作.解决这个问题可有效实现资源和能量的回收.本报告介绍日本在二垩英排放方面目前采取的对策和存在的问题以及大阪大学为阻止二垩英生成所做的基础研究工作.     

Effect of puffer volume and operating force on dielectric recovery performance in thermal puffer-type gas circuit breaker

In order to investigate the influence of puffer volume V/sub P/ and operating force to dielectric performance of GCB at current interruption, we calculated the prospective dielectric withstand voltage V/sub W/ between arcing contacts. The withstand voltage was calculated by the electric field strength appeared on arcing contacts and the allowable electric field strength E/sub W//sup */ of hot gas due to thermal puffer action. We could clarify that large initial puffer volume V/sub P/ can increase withstand voltage V/sub W/ at current breaking point and also that an optimum point exists in operating force F. For example, it was found that in case of the operating force of 1000 kgf, the puffer volume V/sub P/ of 1.2 liter would be best choice in the interrupting condition of i=50 kA and arcing time of 1.35 cycle.     

Elevated levels of tumor necrosis factor-alpha (TNF-alpha) and interleukin-6 (IL-6) activities in the sera and milk of cows with naturally occurring coliform mastitis

The presence of tumor necrosis factor-alpha (TNF-alpha) and interleukin-6 (IL-6) activities was determined in milk and serum of cows with naturally occurring coliform mastitis (CFM). TNF-alpha was detected in the sera from 26 of 32 cows with CFM. TNF-alpha levels were higher in the sera than in the milk. IL-6 was high in the sera of surviving CFM animals, but was low in animals that died and in healthy controls. Furthermore, the mean level of IL-6 was 20-fold higher in the milk than in the sera of mastitic cows. The level of IL-6 in the serum was correlated to that in the milk in individual animals. The presence of IL-6 and TNF-alpha in the sera appears to relate to severe clinical condition of CFM, in the milk whereas they may play a role in generating inflammation of the mammary gland.     

Structural change in the Brill transition of Nylon m/n (1) Nylon 10/10 and its model compounds

Structural changes in the Brill transitions of Nylon 10/10 and its model compounds have been investigated by carrying out the temperature-dependent measurements of X-ray diffraction and infrared spectra along with the DSC measurement. The crystal structure at room temperature was found to be the so-called α form with the all-trans zigzag methylene segments. When the samples were heated, the infrared progression bands of the methylene segments, which are sensitive to the length of all-trans segmental parts, were found to change their spectral patterns in the transition temperature region: the progression bands decreased in intensity and disappeared above the transition region. At the same time several new bands were observed to appear, which were found to correspond to the progression bands of (CH₂)₇-(CH₂)₅trans-zigzag segments. These spectral changes indicate that the methylene segments were conformationally disordered by an invasion of some gauche bonds and as a result the effective length of trans-zigzag segments became shorter. This conformational disordering was found to occur more remarkably in the methylene segment of NH-(CH₂)₁₀-NH part than the CO-(CH₂)₈-CO part. At the same time the infrared bands of amide groups, in particular the bands sensitive to the twisting angles about the CH₂-amide bonds were found to show the remarkable change, indicating the local conformational change from planar-zigzag to twisted form in the CH₂-amide moiety. The frequency shift of amide A band (NH stretching mode) indicated a weakening of intermolecular hydrogen bonds, which however, did not disappear up to the melting region. From these data combined with the X-ray diffraction data, the structural disordering in the Brill transition phenomena was deduced concretely.     

Reliability of Au bump––Cu direct interconnections fabricated by means of surface activated bonding method

As a room temperature bonding method, surface activated bonding (SAB) method has been introduced to be one of the most appropriate interconnection methods for the next generation of electronic packaging. Thus it is important to study the reliability of SAB interconnection in long term life test.In this paper, interconnections of Au bump and Cu film bonded by SAB method were performed in high temperature thermal aging test. Degradation of properties such as electrical resistance, shear strength of bump and interface microstructure during aging process were studied to investigate the failure mechanism of the interconnection. Intermetallic compound Cu₃Au was found formed at the interface during thermal aging, and it causes evolvement of the properties and failure mode of the interconnection changing in shear test. Results reveal that SAB is suitable for the interconnection between Au bump and Cu film and it is reliable in thermal reliability test.     

Monoclonal antibody analysis of phosphatidylserine and protein kinase C localizations in developing rat cerebellum

Understanding the topographical relationships between phosphatidylserine (PS) and protein kinase C (PKC) within neurons can provide clues about the mechanism of translocation and activation of PKC. For this purpose we applied monoclonal antibodies (Abs) of PS and PKC to sections of developing rat cerebellum. The anti-PKC Ab immunohistochemical pattern showed homogeneous staining of Purkinje cells over various postnatal ages, whereas the anti-PS Ab staining showed a heterogeneous localization over these ages. Purkinje cells did not stain well between postnatal day 14 (PND 14) and PND 21, suggesting that the PS was lost from the membrane during preparation of the sections during this period. These data imply that interactions between PS and PKC vary in Purkinje cells during postnatal development.     

The heat transfer and pressure drop characteristics of finned tube banks in forced convection (effects of fin height on pressure drop characteristics)

In recent years the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. For example, in the power generation field, as thermal power generation occupied 60% of the power generation demand, considerable improvement of the thermal efficiency is required. This paper describes the pressure drop characteristics of finned tube banks used for heat exchangers in thermal power generation that were clarified by testing serrated finned tube banks with different fin heights for improved heat transfer and conventional spiral finned tube banks with different fin heights, and an equation to predict pressure drop which is necessary for the heat exchanger design is proposed. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(3): 179–193, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20112