Comparative clinical study of adjuvant postoperative chemotherapy (5-FU, Tegafur, 5-FU + MMC) in curatively resected cases of gastric cancer. Study Group on 5-FU Oral Adjuvant Chemotherapy in Gastric Cancer

A multi-center collaborative study was conducted in curatively resected gastric cancer patients at Stages II and III to compare oral 5-FU (Group A), oral Tegafur (Group B) and i.v. MMC + oral 5-FU (Group C). From May 1982 to April 1985, 1,012 cases were enrolled at 55 institutions. Some 138 (13.8%) were excluded, and 874 were analyzable. In the analysis of background factors, Group B had more cases with tumor of large diameter and advanced Stage. Adverse effects were relatively mild in all groups, and there was no problem in drug tolerance. Five-year survival rate was 67.6%, 62.4% and 68.6% in Groups A, B and C, respectively, reflecting no significant difference among them. It was 85.0%, 83.0% and 81.1% in Stage II and 52.5%, 51.0% and 59.0% in Stage III of Groups A, B and C, respectively. No significant difference was found, but Stage III of Group C showed a slightly higher survival rate. Supportive clinical study will be required to assess the usefulness of MMC as an introduction therapy. We found no difference in efficacy between 5-FU and Tegafur as maintenance therapy. The life-prolongation effect of fluoropyrimidines in comparison with surgery alone should be studied separately.     

3-D electro-magnetic analyses of a cage induction motor with rotorskew

The paper studied the performance characteristics of a three-phase cage induction motor using a 3D finite element technique. Especially, the effects of rotor skew and the rotor end-rings and the distribution of the electromagnetic field toward the axial direction, which have not been able to be analyzed accurately by 2D analysis, were investigated. Since the 3D analysis enabled the analysis of the continuity of the air gap flux density at the core ends and to take into consideration the rotor end-ring impedance, the motor parameters were calculated with high accuracy, compared with 2D analysis. Firstly, the authors made the relation of the rotor end-ring current with the rotor bar current clear, by analyzing the harmonics of the rotor bar current and the rotor end-ring current in the cases of motors without rotor skew and with rotor skew. Secondly, the torque and the rotor axial force were calculated from the distribution of the electromagnetic field obtained by the 3D analysis in the case of rotor skew. They also calculated the axial forces on the both end-rings in the case of rotor skew. The results obtained in the paper show the importance of 3D analysis for the design of induction motors     

ILU factorization well suited to the vector processor using a variant of the 5-point difference scheme

The implementation on the vector processor of Incomplete LU factorization in the Preconditioned Conjugate Gradient method and other Preconditioned CG-like methods for the numerical solutions of the partial differential equations is discussed. For sufficient vectorization, a variant of the standard 5-point difference scheme for 2-dimensional problems is introduced. The convergence property of ILU factorization for this variant is examined in comparison with that vectorized with the usual hyperplane ordering method for the standard 5-point difference scheme on the vector processor. The efficiency and effectiveness of this factorization for the variant of the difference scheme is demonstrated through several computational experiments.     

Studies on syntheses and permeabilities of special polymer membranes

Summary The permeation and separation characteristics of methanol/n-pentanol systems and n-propanol/n-heptane systems through nylon 12 membranes were studied by changing the feed composition of the binary organic mixtures. These characteristics were discussed from the viewpoints of physical and chemical nature of the permeating molecules and the membrane.     

Synthesis of functional π-conjugated polymers from aromatic acetylenes

Because of their unique structures and properties, π-conjugated polymers have attracted the attention of scientists and engineers. The authors have studied the synthesis of two kinds of π-conjugated poly(aromatic acetylene)s, i.e. poly(arylacetylene)s and poly(aryleneethynylene)s with the aim of obtaining new polymers having novel functions or higher performances. This review mainly concerns the authors' results, as follows: first, we describe the synthesis and properties of achiral poly(arylacetylene)s, containing trimethylsilyl groups, oligodimethylsiloxanyl groups, dendritic groups, and glavinoxyl groups, for application as oxygen permselective membrane materials. Their self-membrane-forming abilities and high oxygen permeabilities are presented. Second, the synthesis by asymmetric-induced polymerization of chiral poly(arylacetylene)s having both a main-chain chirality and chiral pendant groups and their application as optical resolution membranes are described. Third, two new synthetic methods for preparing chiral helical poly(phenylacetylene)s without the coexistence of any other chiral moieties are presented. One is helix-sense-selective addition polymerization and the other is in situ removal of chiral pendant groups from membranes of poly(arylacetylene)s that also contain a main-chain chirality. The chiral helical poly(arylacetylene)s were tested as optical resolution membranes. The chiral and achiral poly(arylacetylene)s were synthesized by addition polymerization using metathesis catalysts or rhodium complexes. Finally, the synthesis of regiospecific poly(aryleneethynylene)s bearing stable radicals by the polycondensation of bromoethynylanthracene derivatives using a Pd(0) complex is described. The magnetization and the static magnetic susceptibility of the polyradicals are explained.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Photocatalytic Activity of a TiO<Subscript>2</Subscript> Photocatalyst Doped with C<Superscript>4+</Superscript> and S<Superscript>4+</Superscript> Ions Having a Rutile Phase Under Visible Light

C⁴⁺ and S⁴⁺-codoped titanium dioxide (TiO₂) having a rutile phase was prepared. By doping C⁴⁺ and S⁴⁺ ions into a TiO₂ lattice, the absorption edge of rutile TiO₂ powder was largely shifted from 400 to 700 nm. 2-Methylpyridine and methyleneblue were photocatalytically oxidized at high efficiency on C⁴⁺ and S⁴⁺-doped TiO₂ under visible light at a wavelength longer than 5 nm.     

Outdoor autonomous navigation using SURF features

In this article, we propose a speeded-up robust features (SURF)-based approach for outdoor autonomous navigation. In this approach, we capture environmental images using an omni-directional camera and extract features of these images using SURF. We treat these features as landmarks to estimate a robot’s self-location and direction of motion. SURF features are invariant under scale changes and rotation, and are robust under image noise, changes in light conditions, and changes of viewpoint. Therefore, SURF features are appropriate for the self-location estimation and navigation of a robot. The mobile robot navigation method consists of two modes, the teaching mode and the navigation mode. In the teaching mode, we teach a navigation course. In the navigation mode, the mobile robot navigates along the teaching course autonomously. In our experiment, the outdoor teaching course was about 150 m long, the average speed was 2.9 km/h, and the maximum trajectory error was 3.3 m. The processing time of SURF was several times shorter than that of scale-invariant feature transform (SIFT). Therefore, the navigation speed of the mobile robot was similar to the walking speed of a person.     

Elements and their transitions feasible for NEET

Electron and nuclear transitions in the nuclear excitation by electron transition (NEET) process have been investigated. The NEET transitions for nuclei are presented in a table in which the electron and nuclear transitions, their transition energies, transition multipoles, and nuclear spin angular momentum are given. The elements are listed for which the difference between the electron and nuclear transition energy is <5 keV, because the NEET probability will be appreciable if the electron transition energy is close to the nuclear transition one. As both the experimental and theoretical studies for NEET are at an early stage, only the elements and their parameters related to NEET are listed here. The present compilation, however, provides a useful direction for future studies of NEET and its applications to nuclear science.