Preparation of a Near-Infrared Ray Absorption Film from N-Phenylthiocarbamoyl Chitosan Derivative

We recently observed that the decanoylation of N-phenylthiocarbamoyl chitosan (2) with a mixture of decanoic anhydride and pyridine at 60 °C for 24 h afforded N,N-(decanoyl)phenythiocarbamoyl-/2-isothiocynato chitosan decanoate (3b) rather than the expected product N,N-(decanoyl)phenylthiocarbamoyl chitosan decanoate (3a). This result suggested that some of the N,N-(decanoyl)phenylthiocarmbamoyl groups had been converted to isothiocyanate groups during the decanoylation process. The subsequent reaction of compound 3b with aniline gave N,N-(decanoyl)phenylthiocarbamoyl/N-phenylthiocarbamoyl chitosan decanoate (4) in high yield. A solution of compound 4 in CHCl₃ was then added to a solution of copper decanoate (5) in the same solvent, and the resulting mixture was cast onto a glass plate to give a cast film. The film was annealed at 200 °C in an oven to give a greenish film, which showed good near-infrared absorption characteristic in the range of 800–2200 nm.     

Consideration of Femtosecond Radiation Generation on NewSUBARU Storage Ring

We studied on realization of short pulse gamma ray and X-ray simultaneously induced by a femtosecond laser on NewSUBARU storage ring. Based on the fact that the transverse dimensions of electron beam are much shorter than the longitudinal one, the laser light is arranged to collide the electron beam at a right angle to generate femtosecond pulse gamma ray, furthermore, the modulated part of the electron bunch gives rise to short pulse X-ray by synchrotron radiation from a downstream bending magnet. The temporal characteristic of the radiation is analyzed in this paper, as well as the performances are estimated.     

Synthesis and luminescence of Sr2CeO4 fine particles

Fine particles of a blue emission phosphor Sr₂CeO₄ have been synthesized using a chemical co-precipitation technique, and the textual and luminescent properties were compared with the one synthesized by the conventional solid-state reaction method. Particle size and distribution of the Sr₂CeO₄ fine powder prepared by the co-precipitation process were smaller and narrower than those obtained by the samples prepared from the conventional one. The emission intensity of the fine particles was equal to that of the larger particles prepared from the solid-state reaction, on the contrary to the general tendency that emission intensity decrease with particle size reduction. Although no Ce³⁺ peaks were observed in EPR measurements, X-ray photoelectron spectra of the samples clearly elucidated the existence of Ce³⁺ only on the surface of Sr₂CeO₄.     

Comparison of activities in selective catalytic reduction of NOx by C3H8 over Co/MFI, Fe/MFI, and H/MFI zeolite catalysts

The Co/MFI(SiO₂/Al₂O₃ = 30) were prepared by a precipitation method with NaOCl in alkali solutions exhibited high activities to N₂ at 250 °C for the selective catalytic reduction (SCR) of NO_x. These catalysts showed two UV–vis bands at 700 and 400 nm, indicating the presence of octahedral Co(III) as well as tetrahedral Co(II). The high SCR activity over such Co(III, II)/MFI(30) seems to come from Co(III)---O moieties. The Co(II)MFI(30) catalysts prepared from Co(II)Cl₂ exhibited low SCR activities due to the presence of tetrahedral Co(II) ions in MFI. Less CO formation occurred over Co/MFI catalysts. The Fe/MFI(30) catalyst exhibited high activity due to the presence of some Fe---O species in MFI but more amount of CO were produced during SCR. H/MFI(30) catalyst exhibited a good SCR activity. However, more amount of carbonaceous deposits were produced on it. The correlation between acid concentration and SCR activity was discussed over H/MFIs.     

Analysis of course errors on CVOR antennas (including effects ofmutual coupling between elements)

A VHF omnidirectional radio range (VOR) is a navigation aid radio beacon facility, which provides aircraft with azimuth information relative to the VOR station in question as the origin. In Japan, two types of VOR-the conventional type (referred to as a CVOR) and the Doppler type (referred to as a DVOR)-are currently in use. An element known as the Alford loop antenna (ALA), which changes the loading reactance, is used for the VOR because the horizontally polarized wave and nondirectivity in the horizontal plane are preferred. A VOR antenna consists of a carrier antenna and a sideband antenna-an aircraft receives separate signals from these two antennas and compares them to obtain azimuth information. The mutual coupling between the elements forming the carrier and the sideband antenna affects the directivity of the single elements, resulting in errors in azimuth information. With the mutual coupling between the antenna elements being taken into consideration, a quantitative calculation was made by using the moment method-the results of the calculation made it clear that a loading reactance value of -320 Ω is better to make not mutually coupled elements nondirectional while a loading reactance value of -600 Ω is optimum to minimize the azimuth error of a CVOR     

Recovering spectral data from natural scenes with an RGB digital camera and colored filters

Many spectral‐recovery methods using RGB digital cameras assume the underlying smoothness of illuminant and reflectance spectra, and apply low‐dimensional linear models. The aim of the present work was to test whether a direct‐mapping method could be used instead of a linear‐models approach to recover spectral radiances and reflectances from natural scenes with an RGB digital camera and colored filters. In computer simulations, a conventional RGB digital camera with up to three colored filters was used to image scenes drawn from a hyperspectral image database. Three measures were used to evaluate recovery with the direct‐mapping method: goodness‐of‐fit, root‐mean‐square error, and a color‐difference metric. It was found that with two and three filters both spectral radiances and reflectances could be recovered sufficiently accurately for many practical applications. With little increase in computational complexity, an RGB camera and a few colored filters can provide significantly better recovery of natural scenes than an RGB camera alone. © 2007 Wiley Periodicals, Inc. Col Res Appl, 32, 352–360, 2007     

Color registration error reduction method compensating the influence of belt thickness variation in electrophotographic process

This paper proposes a new belt drive control method for reducing a belt velocity-fluctuation that is caused by a belt thickness-variation in the circumferential direction. A belt driving system performs feedback control with a rotary encoder-output mounted on a driven roller. This proposed method correct the reference value of the feedback control for the purpose of the belt velocity regulation. The correction includes two steps. The first step acquires the encoder-output of the driven roller and calculates the rotational angular velocity-fluctuation with one cycle of the belt rotation. The second step converts from the velocity-fluctuation to the correction value of the feedback reference. The correction value cancels a detection error of the driven roller caused by the belt thickness-variation. After these steps, the belt driving system controls the belt velocity as compensating the belt velocity-fluctuation. Experimental result showed the significant fluctuation reduction on a typical tandem-engine printer.     

Immunological properties of Weil-Felix test negative sera from patients with Japanese spotted fever

Sera from 4 out of 19 patients with the Japanese spotted fever were negative to OX2 antigen of Weil-Felix (WF) test. These WF test negative sera were analyzed by ELISA and immunoblot used whole cells and lipopolysaccharides (LPS) of rickettsiae and Proteus strains as antigens. These acute-phase sera have already possessed the IgG antibodies against LPS of Proteus OX2 strain, whereas IgM antibodies in these acute- and convalescent-phase sera did not react with this LPS. On the other hand, the reactivity of IgM antibodies of the convalescent-phase sera in the 2 patients with LPS of Proteus OX19 strain increased as compared with that of the acute-phase sera by ELISA, and these IgM antibodies also showed the reactivity with bands of OX19-LPS in the immunoblot. On the basis of these results, it is interpreted that the WF test negative sera from patients with Japanese spotted fever are due to the presence of IgG antibodies against OX2-LPS in the sera.