Polyaniline and polypyrrole modified conductive nanocomposites of polyfuran and polythiophene with montmorillonite clay

Nanocomposites of polyfuran (PF) and polythiophene (PTP) with montmorillonite clay (MMT) were prepared and modified by loading of polyaniline (PANI) and polypyrrole (PPY) moieties via polymerization of aniline (ANI) and pyrrole (PY) in aqueous dispersions of PF-MMT and PTP-MMT nanocomposites. Formation of PANI and PPY and their subsequent incorporation in the PF-MMT and PTP-MMT composites was confirmed by FTIR absorption studies. X-ray diffraction (XRD) patterns of PANI and PPY modified PF-MMT and PTP-MMT composites showed that PF-MMT and PTP-MMT intercalates were still present in the modified composites. Scanning electron microscopic analysis revealed distinctive morphological patterns of the various composite particles. The dc conductivity values of PANI and PPY modified PF-MMT and PTP-MMT composites were in the order of 10⁻² S/cm in either system – a value much improved compared to the same for both of the unmodified PF-MMT (10⁻⁷ S/cm) and PTP-MMT (10⁻⁵ S/cm) nanocomposites respectively.     

Facile synthesis of reduced graphene oxide–gold nanohybrid for potential use in industrial waste-water treatment

Here, we report a facile approach, by the photochemical reduction technique, for in situ synthesis of Au-reduced graphene oxide (Au-RGO) nanohybrids, which demonstrate excellent adsorption capacities and recyclability for a broad range of dyes. High-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) data confirm the successful synthesis of Au-RGO nanohybrids. The effect of several experimental parameters (temperature and pH) variation can effectively control the dye adsorption capability. Furthermore, kinetic adsorption data reveal that the adsorption process follows a pseudo second-order model. The negative value of Gibbs free energy (ΔG⁰) confirms spontaneity while the positive enthalpy (ΔH⁰) indicates the endothermic nature of the adsorption process. Picosecond resolved fluorescence technique unravels the excited state dynamical processes of dye molecules adsorbed on the Au-RGO surface. Time resolved fluorescence quenching of Rh123 after adsorption on Au-RGO nanohybrids indicates efficient energy transfer from Rh123 to Au nanoparticles. A prototype device has been fabricated using Au-RGO nanohybrids on a syringe filter (pore size: 0.220 μm) and the experimental data indicate efficient removal of dyes from waste water with high recyclability. The application of this nanohybrid may lead to the development of an efficient reusable adsorbent in portable water purification.     

Reflective light modulator based on epsilon-GaSe crystal

We report the results of investigating a low-voltage, polarization-insensitive, reflective-type modulator based on an epsilon-GaSe crystal and operated at the 1.960-eV line of a He-Ne laser. We demonstrate that the modulation in an Al-epsilon-GaSe-Cu device results mainly from the Franz-Keldysh effect. Relatively high speed and low operating voltage could make these modulators with Schottky-barrier contacts attractive devices in the red range of the spectrum.     

Effects of Pressure on the Performance of CNTs-Supported Catalyst in a Fischer-Tropsch Reaction

Fischer-Tropsch （FT） reaction involves conversion of syngas （a mixture of carbon monoxide and hydrogen） into higher hydrocarbons in the presence of an active catalyst. The syngas can be derived from non-petroleum feedstocks such as coal, biomass and natural gas, thus the FT reaction provides an alternative route for production of clean fuels. The FT process has received growing interest in recent years due to uncertainty in the Middle East, fast depletion of fossil fuel and environmental concern. This paper reports the synthesis, physicochemical properties and catalytic performance of cobalt-based catalyst in the FT reaction. The catalysts comprised metal nanoparticles supported on carbon nanotubes （CNTs） which were synthesized via a wet impregnation method. The catalysts were characterized using transmission electron microscopy （TEM）, temperature-programmed reduction/desorption （TPR/TPD） and X-ray photoelectron spectroscopy （XPS）. The performance of the cobalt-based catalyts in a FT reaction was evaluated in a fixed bed microreactor equipped with an on-line gas chromatograph for analyses of hydrocarbon products. The catalysts investigated in this work were Co/CNTs, 70Co30Mn/CNTs, 0.06%K/70Co30Fe/CNTs and 0.04%Nb/70Co30Fe/CNTs. TEM analyses revealed that the average sizes of the metal nanoparticles were 4-5 nm. Based on TPD analyses, the dispersion of these nanoparticles on CNTs were greater than 90%. The presence of both Co2＋ and Co3＋ ions were confirmed by XPS analysis. The 0.04% Nb/70Co30Fe/CNTs catalyst performed better than other catalysts in the FT reaction where it resulted in CO conversion of 35% and 16% C5＋ selectivity at pressure of 1 bar, 220 ~C and H2：CO of 2：1. Using the same catalyst, the CO conversion and C5＋ selectivity increased to 60% and 57%, respectively when the pressure was increased to 20 bar.     

Medicinal importance of grapefruit juice and its interaction with various drugs

Grapefruit juice is consumed widely in today's health conscious world as a protector against cardiovascular diseases and cancers. It has however, been found to be an inhibitor of the intestinal cytochrome P – 450 3A4 system, which is responsible for the first pass metabolism of many drugs. The P – glycoprotein pump, found in the brush border of the intestinal wall which transports many of these cytochrome P – 450 3A4 substrates, has also been implicated to be inhibited by grapefruit juice. By inhibiting these enzyme systems, grapefruit juice alters the pharmacokinetics of a variety of medications, leading to elevation of their serum concentrations. Most notable are its effects on the calcium channel antagonist and the statin group of drugs. In the case of many drugs, the increased serum concentration has been found to be associated with increased frequency of dose dependent adverse effects. In this review, we have discussed the phytochemistry of grapefruit juice, the various drugs involved in the drug – grapefruit juice eraction with their mechanisms of action and have presented the clinical implications of these interactions.     

Synthesis of SiC ceramics from processed cellulosic bio-precursor

Synthesis of SiC ceramic from processed cellulosic bio-precursor was investigated. Bamboo (Bambusa tulda Roxb.) plants abundantly available in the Jorhat district of Assam, India, were selected for extraction of fibers following Kraft pulping method and bleached bamboo pulp fibers were suitably cast in the form of rectangular boards. Coir fibers available in the Alleppy district of Kerala, India, were initially digested with dilute alkali, mixed with cellulose acetate solution, air dried and then hot-pressed at 140 ± 5 °C under 2.0–2.5 MPa pressure to make rectangular boards. Well-characterized processed bio-precursors were pyrolysed at ～800 °C under flowing N₂ atmosphere to prepare the bio-carbonaceous preforms (carbon templates) which showed nearly uniform shrinkages in all directions. Coir fiber composite board carbon showed lower pyrolytic weight loss (～66%), higher density (0.49 g cm^?3), lower porosity (～58%) and narrower pore diameter (10 μm) compared to the cast bamboo pulp fiber board carbon. The carbon samples showed perfect retention of fibrous morphological features of hierarchically grown bio-structures. Ceramization of carbon templates could be done by reactive melt silicon infiltration into porous channels at ～1600 °C under vacuum. The final ceramics were adequately dense (%theoretical density > 99%), showed negligible linear dimensional changes (indicating net-dimension formation capability), presence of crystalline Si and SiC phases and duplex microstructure with complete preservation of fibrous architecture of plant bio-structure. The Si/SiC ceramic composite synthesized from coir fiber board gave room temperature 3-point flexural strength and Young's modulus values of 121 MPa and 276 GPa, respectively. Both the ceramic composites showed adequate oxidation resistance during heating at 1300 °C for 7 h in air.     

Road Oriented Traffic Information System for Vehicular Ad hoc Networks

Over the last few years, vehicular ad hoc networks (VANETs) have gained popularity for their interesting applications. To make efficient routing decisions, VANET routing protocols require road traffic density information for which they use density estimation schemes. This paper presents a distributed mechanism for road vehicular density estimation that considers multiple road factors, such as road length and junctions. Extensive simulations are carried out to analyze the effectiveness of the proposed technique. Simulation results suggested that, the proposed technique is more accurate compared to the existing technique. Moreover, it facilitate VANET routing protocols to increase packet delivery ratio and reduce end-to-end delay.     

STRATIGRAPHIC CORRELATION AND SOURCE ROCK CHARACTERISTICS OF THE BALUTI FORMATION FROM SELECTED WELLS IN THE ZAGROS FOLD BELT,KURDISTAN REGION,NORTHERN IRAQ

The Upper Triassic Baluti Formation has been identified and mapped based on its log response in selected wells from the Zagros foldbelt in the Kurdistan Region of northern Iraq. A preliminary evaluation of the formation's source rock potential was made by Rock-Eval screening analysis in four wells along a NW-SE profile (Atrush-1, Shaikan-5B, Taq Taq-22 and Miran-2) with maturity determined from reflectance measurements in samples from well Taq Taq-22. The Baluti Formation consists of thinly interbedded shales, carbonates and anhydrite ranging in thickness from 48 m in well Atrush-1 to 118 m in well Miran-2. The Rock-Eval screening was conducted primarily on bulk cuttings samples plus selected picked cuttings. The TOC content is low to moderate (0.23 to 1.14 wt%). However, the shale content in many of the analysed bulk samples was relatively low, making assessment of the source potential problematic. The highest TOCs are recorded from the thickest analysed sections from wells Miran-2 and Taq Taq-22, where high-gamma bituminous shales are present. Rock-Eval T_max values ranging from 295 to 438°C are not consistent with estimates of pre-Zagros burial to depths of between 4600 m (Atrush-1) and 6900 m (Miran-2). The relatively low T_max values suggest that the S2 response does not reflect kerogen pyrolysis in these samples and may be due to the presence of solid bitumen, which is observed in the Baluti Formation in at least three of the study wells (Taq Taq-22, Miran-2 and Shaikan-5B). Little pyrolysable organic matter remains in the formation due to the interpreted deep pre-Zagros burial and the consequent high maturity in Taq Taq-22 (VR = 1.51%R_o) and Miran-2 (estimated VR >2%R_o), and the poor source character in Atrush-1 and Shaikan-5B. Organic petrography suggests the presence of vestiges of Types I and II kerogen in Taq Taq-22, with bitumen observed as stains in the matrix of the shales and also in the pores and fractures of interbedded dolostones. However, bitumen reflectance determinations for Taq Taq-22 indicate an equivalent vitrinite reflectance maturity of no more than 0.93%R_o, which is significantly less than that of the indigenous vitrinite, implying the solid bitumen in this well is derived primarily from migrated hydrocarbons. Further detailed analysis is required, but the results suggest that the Baluti Formation may have sourced hydrocarbons in its depocentre which is identified in this study as covering a NW-SE trending area between Bekhme and Sangaw.