Dominant rock properties affecting the performance of conical picks and the comparison of some experimental and theoretical results

Conical picks are the essential cutting tools used especially on roadheaders, continuous miners and shearers and their cutting performance affects directly the efficiency and the cost of rock/mineral excavation. In this study, in order to better understand the effects of dominant rock properties on cutter performance, 22 different rock specimens having compressive strength values varying from 10 to 170 MPa are first subjected to a wide range of mechanical tests. Then, laboratory full-scale linear cutting tests with different depth of cut and cutter spacing values are realized on large blocks of rock specimens using one type of conical pick. Specific energy, cutting and normal force values for relieved and unrelieved cutting modes are recorded using a triaxial force dynamometer with capacity of 50 tonnes and a data acquisition system. Cutter force and specific energy values are correlated with rock properties and theoretical force and specific energy values obtained from widely used theoretical approaches.The results indicate that uniaxial compressive strength among the rock properties investigated is best correlated with the measured cutter performance values, which is in good agreement with previous studies. However, it is also emphasized in this study that Brazilian tensile strength, Schmidt hammer rebound values, static and dynamic elasticity modulus are also dominant rock properties affecting cutter performance.Theoretical specific energy defined by different researchers has a meaningful relationship with the experimental specific energy, which is an essential parameter for predicting the instantaneous cutting rates of mechanical excavation systems. It is also demonstrated that the experimental cutter forces obtained for 5 mm depth of cut are in good agreement with theoretical force values, if the friction angle between rock and cutting tool is included in the theoretical formulation. It is emphasized that, to some extend, laboratory tests can help to minimize high cost of a trial–error approach in the field.     

Geometric features of the flame propagation process for an SI engine having dual‐ignition system

Flame front surface area and enflamed volume (the volume enclosed with flame front) is theoretically analysed for a spark‐ignition engine, having cylindrical disc‐shaped combustion chamber with two spark plugs located axisymmetrically on cylinder head, between cylinder axis and cylinder wall. Spherical flame front assumption is used. A computer code is developed based on purely geometric consideration of the flame development process in combustion chamber, and is used to investigate the effects of variations of spark plugs' locations on geometric features of the flame front. A comparison has also been made with a spark‐ignition engine having one spark plug at the same location. Copyright © 2002 John Wiley & Sons, Ltd.     

Comparison of Two Drying Schedules for European Hophornbeam (Ostrya carpinifolia Scop.) Lumber

Two types of conventional kiln-drying schedules (mild and harsh) based on moisture content (MC) were compared with regard to time, drying quality, and energy cost. The results were evaluated according to the classification of the European Drying Group. Proper drying periods of mild and harsh schedules were found to be 550 and 514 h, respectively. Evaluations in terms of drying quality indicated that better results were achieved with the mild schedule, especially when comparing drying defects and final MC. From an energy efficiency point of view, the harsh schedule, by saving 36 h of drying time, reduced electricity by 594 KWh and was therefore found to be $65 more profitable in this trial.     

A hyperheuristic approach to examination timetabling problems: benchmarks and a new problem from practice

Many researchers studying examination timetabling problems focus on either benchmark problems or problems from practice encountered in their institutions. Hyperheuristics are proposed as generic optimisation methods which explore the search space of heuristics rather than direct solutions. In the present study, the performance of tournament-based hyperheuristics for the exam timetabling problem are investigated. The target instances include both the Toronto and ITC 2007 benchmarks and the examination timetabling problem at KAHO Sint-Lieven (Ghent, Belgium). The Toronto and ITC 2007 benchmarks are post-enrolment-based examination timetabling problems, whereas the KAHO Sint-Lieven case is a curriculum-based examination timetabling problem. We drastically improve the previous (manually created) solution for the KAHO Sint-Lieven problem by generating a timetable that satisfies all the hard and soft constraints. We also make improvements on the best known results in the examination timetabling literature for seven out of thirteen instances for the To ronto benchmarks. The results are competitive with those of the finalists of the examination timetabling track of the International Timetabling Competition.     

Comparison of OR and AI methods in discrete manufacturing using fuzzy logic

Since 1950s the techniques of Operations Research (OR) and Optimization have been utilized to increase the efficiency of the production systems. With the widespread use of computers, it has even become easier to deal with industrial problems. However the complexity of the problems still reveals the difficulty in providing solutions. The use of artificial intelligence (AI) seems to attract the attention of the researcher to overcome to the difficulties. This has already been realized with several successful applications. In this study, the use of AI and OR techniques is compared using fuzzy logic. The progress of manufacturing systems, characteristics of production processes, system managements and system behavior are taken into account. The study is focussed on only discrete manufacturing.     

Preparation and Characterization of Novel Polyimides from 2,6-bis[1-(p-dimethylaminophenylimino)ethyl] pyridine for the Selective Extraction of some Metals

Summary A group of new polyimides has been prepared by solution condensation of 2,6-bis[1-(p-dimethylaminophenylimino)ethyl] pyridine containing pendant NMe₂ units and various dianhyrides in N-methylpyrrolidone (NMP). The tridentate (N-N′-N) pydim ligands were prepared by Schiff-base condensation of 2,6-diacetylpyridine and 4-dimethylaminoaniline in the presence of formic acid as catalyst. These polymers were investigated for their extraction capabilities for Zn(II), Mn(II), Cu(II), Cd (II) and Ni(II) and at different pH. Under different conditions enhanced selectivity was observed. Up to 98% quantitative recoveries were observed for all metals.     

Uncertainty Analysis of Four-Terminal-Pair Capacitance Characterization up 30 MHz

The Impedance Group Laboratories of National Metrology Institute of Turkey previously developed a new method for the characterization of Agilent 16380A-type four-terminal-pair air dielectric capacitance standards ranged from 1 to 1,000 pF up to 30 MHz. This method is based on obtaining all resonance frequencies of standard capacitors using a vector network analyzer in order to calculate inductive residual parameters of the standards. As a continuation of the study, this paper gives a detailed uncertainty analysis for the method.     

Fire detection in video sequences using a generic color model

In this paper, a rule-based generic color model for flame pixel classification is proposed. The proposed algorithm uses YCbCr color space to separate the luminance from the chrominance more effectively than color spaces such as RGB or rgb. The performance of the proposed algorithm is tested on two sets of images, one of which contains fire, the other containing fire-like regions. The proposed method achieves up to 99% fire detection rate. The results are compared with two other methods in the literature and the proposed method is shown to have both a higher detection rate and a lower false alarm rate. Furthermore the proposed color model can be used for real-time fire detection in color video sequences, and we also present results for segmentation of fire in video using only the color model proposed in this paper.