Enhanced sludge conditioning by enzyme pre-treatment: comparison of laboratory and pilot scale dewatering results.

The effect of enzyme pre-treatment on dewaterability of anaerobically digested sludge was investigated at both laboratory and pilot scale. Our results revealed a significant increase in cake solid content (27% cake solids compared to 18% without enzyme pre-treatment), using an enzyme dose of only 20 mg/L. In order to assess practical application, enzyme pre-treatment was applied at the Wilmington, Delaware (U.S.) wastewater treatment plant, using a pilot-scale centrifuge. However, the efficiency reached in laboratory scale could not be obtained in pilot scale, where the final cake solids content did not exceed 20%. Centrifuge and belt filter press (simulated by Crown Press) dewatering were compared in terms of the process efficiencies in the absence and presence of enzyme pre-treatment. Possible factors that might cause the differences were tested by experimental and statistical comparisons. Results indicated that the higher shear applied in centrifugation is responsible for the lack of improved cake solids. The network strength of sludge determined by rheological measurements revealed that enzymatic treatment weakens the gel structure of the sludge floc through the hydrolysis of extracellular polymeric substances; this allows improved dewatering by filtration processes, but leads to floc deterioration when subjected to high shear during centrifugation.     

Accurate and simple synthesis formulas for coplanar waveguides

Simple and accurate closed‐form formulas obtained by using a differential evolution algorithm are presented for the synthesis of coplanar waveguides (CPW). The results of the synthesis formulas proposed in this article are compared with those of the quasi‐static analysis, the synthesis formulas reported by the other researchers and also the experimental works available in the literature. The accuracy of the proposed synthesis formulas is found to be better than 0.75% for 9256 CPWs samples. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2008.     

Determination of alkaloids and phenolic compounds in black tea processed by two different methods in different plucking seasons

The effects of two different rolling methods and three tea plucking seasons on alkaloids and phenolics, mainly flavan‐3‐ols and theaflavins, in black tea were studied using an improved high‐performance liquid chromatographic method. Better separation of all tea compounds analyzed—the most important factor for their identification and quantitation—was achieved only with long elution gradients, which overcame the limitations of previously reported methods. Precision of the assay method was very high since intra‐day and inter‐day variations were within 0.76% and 1.66%, respectively. All analytes exhibited good linearity over the range evaluated with a correlation coefficient of 0.9987–1.000. Among the four solvents evaluated, 80% methanol was the most solvent for extracting individual tea compounds. The extraction method applied exhibited good repeatability (CV: 0.39–3.29%). The content of tea compounds analyzed varied with processing method and plucking season. Teas processed using the Cay‐Kur method contained higher levels of identified phenolic compounds than orthodox teas, but their alkaloid content was similar to each other. The most abundant alkaloid in teas was caffeine, ranging from 17.84 mg g^?1 dry weight in September plucking to 23.79 mg g^?1 dry weight in May plucking. With respect to phenolic compounds, theaflavins were at the highest level, 14.27 mg g^?1 dry weight, in Cay‐Kur tea processed in May. Copyright © 2007 Society of Chemical Industry     

Effects of prolonged heating on antioxidant activity and colour of honey

The kinetics of changes in total antioxidant activity as assessed by DPPH radical and brown pigment formation (BPF) in honey heated at different temperatures (50, 60 and 70 °C) for up to 12 days were studied. Antioxidant activity and BPF increased with treatment temperature and time. BPF increased following zero-order kinetics with the activation energy value of 122 kJ/mol⁻¹ at 50–70 °C. However, antioxidant activity variation showed different trends according to heating temperatures following second-order, first-order and zero-order kinetics at 50, 60 and 70 °C, respectively. Heating of honey at 70 °C was found to be more effective than 50 and 60 °C for both two parameters. The results demonstrated that antioxidant activity was correlated with increased browning of the samples.     

New perylene derivative dyes for dye-sensitized solar cells

We have studied the influence of the spacer alkyl chain length of perylenemonoimide (PMI) dyes on the device performance in dye-sensitized solar cells (DSSCs). We observed that the dyes with longer and brunched alkyl chains exhibit higher efficiencies in DSSCs. In line with these statements we now report the highest efficiency obtained under standard conditions for a perylene imide derivative with PMI-DA1 that performs 300 mV open circuit voltage, 9.79 mA/cm² short-circuit current and 1.61% overall conversion efficiency.     

Very accurate and simple CAD models based on neural networks for coplanar waveguide synthesis

Very accurate and simple neural models for coplanar waveguide (CPW) synthesis are proposed. The results obtained from these neural models are compared with the results of quasi‐static analysis, the other synthesis formulas, and other experimental works. The accuracy of the neural models is found to be better than 0.4% for 11,206 CPW samples. © 2005 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2005.     

Platelet‐to‐lymphocyte ratio better predicts inflammation than neutrophil‐to‐lymphocyte ratio in end‐stage renal disease patients

Neutrophil‐to‐lymphocyte ratio (NLR) was introduced as a potential marker to determine inflammation in end‐stage renal disease (ESRD) patients. Recently, platelet‐to‐lymphocyte ratio (PLR) and NLR were found to positively correlated with inflammatory markers including tumor necrosis factor‐α (TNF‐α) and interleukin (IL)‐6 in cardiac and noncardiac patients. Data regarding PLR and its association with inflammation are lacking in hemodialysis (HD) and peritoneal dialysis (PD) patients. Hence, we aimed to determine the relationship between PLR, NLR, and inflammation in ESRD patients. This was a cross‐sectional study involving 62 ESRD patients (29 females, 33 males; mean age, 49.6 ± 14.6 years) receiving PD or HD for ≥6 months in the Dialysis Unit of Necmettin Erbakan University. PLR, NLR, C‐reactive protein, TNF‐α, IL‐6 levels were measured. PLR, NLR, serum high sensitive C‐reactive protein, IL‐6, and TNF‐α levels were significantly higher in PD patients when compared with HD patients. ESRD patients with PLR ≥ 140 had significantly higher NLR, IL‐6, and TNF‐α levels when compared to patients with PLR < 139. In the bivariate correlation analysis, PLR was positively correlated with NLR, IL‐6, and TNF‐α in this population. When we compared the association of PLR and NLR with IL‐6 (r = 0.371, P = 0.003 vs. r = 0.263, P = 0.04, respectively) and TNF‐α (r = 0.334, P = 0.008 vs. r = 0.273, P = 0.032, respectively), PLR was found to be superior to NLR in terms of inflammation in ESRD patients. Simple calculation of PLR can predict inflammation better than NLR in ESRD patients.     

Influence of shear properties and fibre imperfections on the compressive behaviour of GFRP laminates

The influence of shear strength properties and fibre misalignment on the compressive behaviour of unidirectional glass fibre-polypropylene laminates has been examined. Tests were conducted between 20°C and 120°C to provide variation in the constitutive behaviour of the polymer matrix and consequently variation in the support provided to the glass fibres. It was found that the laminate loses strength as the operating temperature increases and failure occurs due to fibre microbuckling. At temperatures higher than 50°C the failure mode switches from in-plane to out-of-plane microbuckling. As the test temperature increases the shear strength and stiffness of the resin are considerably reduced; this decreases the amount of side support for the fibres and reduces the strain level at which fibre buckling initiates. Growth of this damage requires little additional load, suggesting that compression strength is controlled by initiation, rather than propagation of microbuckling. Fracture characteristics have been identified using optical and scanning electron microscopy. Recent theoretical models have been employed to predict the compressive stress-strain response and strength.