Water Resources Management - Environmental Impact Assessments (EIAs) of development projects are necessary to minimize negative impacts and maximize benefits. The objective of this paper is to... 相似文献
The throughput enhancement of space-time spreading (STS)-based code division multiple access (CDMA) system is investigated in this paper. Variable spreading factor (VSF) is utilized to improve the data throughput of the system in non-frequency selective Rayleigh fading channel. In this contribution, an analytical approach is proposed to compute a new expression for the bit error rate (BER) performance of the STS-based CDMA system against pre-despreading signal-to-noise-ratio (SNR) for different values of spreading factor. The other contribution of the paper is deriving a new analytical expression for the throughput enhancement of the VSF STS-based CDMA system in non-frequency selective Rayleigh fading channel. Simulation and analytical results demonstrate that using VSF method in STS-based CDMA system improves the throughput of the system by keeping the BER performance at a target level. 相似文献
Social annotation systems (SAS) allow users to annotate different online resources with keywords (tags). These systems help users in finding, organizing, and retrieving online resources to significantly provide collaborative semantic data to be potentially applied by recommender systems. Previous studies on SAS had been worked on tag recommendation. Recently, SAS‐based resource recommendation has received more attention by scholars. In the most of such systems, with respect to annotated tags, searched resources are recommended to user, and their recent behavior and click‐through is not taken into account. In the current study, to be able to design and implement a more precise recommender system, because of previous users' tagging data and users' current click‐through, it was attempted to work on the both resource (such as web pages, research papers, etc.) and tag recommendation problem. Moreover, by applying heat diffusion algorithm during the recommendation process, more diverse options would present to the user. After extracting data, such as users, tags, resources, and relations between them, the recommender system so called “Swallow” creates a graph‐based pattern from system log files. Eventually, following the active user path and observing heat conduction on the created pattern, user further goals are anticipated and recommended to him. Test results on SAS data set demonstrate that the proposed algorithm has improved the accuracy of former recommendation algorithms. 相似文献
Fibrous monoliths (FMs) exhibit graceful failure in flexure and have higher toughness values. In this research, a mixture of Al2O3 and SiC as the core and graphite as the shell material of fibers were produced by extrusion-molding technique and after aligning along intended directions (0°, 90°, and 0°/90°) were sintered using the hot-pressing method at the temperature of 1500°C under pressure of 35 MPa for 1 hour. The significance of fibers orientation angle and the cell to cell boundary volume ratio in defining the fracture behavior of the FMs was detected. Because of the extensive crack interactions with graphite cell boundary such as crack deflection and delamination, with increasing cell boundary content from 25 to 30 vol%, the fracture toughness was enhanced. The highest flexural strength (184.8 ± 0.61 MPa) obtained from samples with 0° fibers orientation compared to 0°/90°. Since in the transverse plies (layers with 90° aligning), the properties of matrix phase are dominant, hence the strength in specimens with 0°/90° fibers orientation decreased considerably due to weak graphite matrix phase. In addition, the fracture toughness value increased up to 8.35 ± 0.74 MPa·m1/2 for the unidirectional architecture of (0°) in comparison with cross-ply (0°/90°) architecture. 相似文献
Current localization techniques in outdoors cannot work well in indoors. Wi-Fi fingerprinting technique is an emerging localization technique for indoor environments. However in this technique, the dynamic nature of WiFi signals affects the accuracy of the measurements. In this paper, we use affinity propagation clustering method to decrease the computation complexity in location estimation. Then, we use the least variance of Received Signal Strength (RSS) measured among Access Points (APs) in each cluster. Also we assign lower weights to altering APs for each point in a cluster, to represent the level of similarity to Test Point (TP) by considering the dynamic nature of signals in indoor environments. A method for updating the radio map and improving the results is then proposed to decrease the cost of constructing the radio map. Simulation results show that the proposed method has 22.5% improvement in average in localization results, considering one altering AP in the layout, compared to the case when only RSS subset sampling is considered for localization because of altering APs.
The development of eco-friendly and nontoxic processes for the synthesis of nanoparticles is one of the most important discussed issues in nanotechnology science. This study reports the green synthesis of silver nanoparticles (AgNPs) using aqueous extract of leaf, stem, and root of Avicennia marina, the native and dominant mangrove plant in southern Iran. Among the different plant parts, the extract of leaves yielded the maximum synthesis of AgNPs. Synthesized AgNPs were investigated using UV–visible spectrophotometry, transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), energy-dispersive spectroscopy (EDS), and Fourier transform infrared (FTIR) spectroscopy. Absorption spectrum in 420?nm confirmed the synthesis of AgNPs. TEM images revealed that the synthesized AgNPs had the same spherical morphology with a size range between 0 and 75?nm. The distribution size histogram indicated that the most frequent particles were in the range of 10–15?nm and the mean size of nanoparticles was 17.30?nm. The results of SEM image showed nanoparticles with a size range between 15 and 43?nm. XRD pattern indicated the crystalline nature of synthesized nanoparticles. EDS results confirmed the presence of elements like silver, carbon, chlorine, nitrogen, and oxygen in the nanoparticles produced from leaf extract. Silver had the maximum percentage of formation, 51.6%. FTIR indicated the presence of different functional groups such as amines, alcohol, alkanes, phenol, alkyl halides, and aromatic loops in the synthesis process. Green biosynthesis of AgNPs using aqueous extract of native A. marina appears rapid, reliable, nontoxic, and eco-friendly. 相似文献