A comparison of placebo response with major depressive disorder in patients recruited through newspaper advertising versus consultation referrals

Recent evidence indicates few differences between patients recruited through advertising and by consultation referral, and there is some suggestion that those recruited through advertising are more representative of the target community population. However little has been reported on differences in placebo response and compliance in these two patient groups. We conducted a retrospective chart review of 49 patients with major depressive disorder (MDD), recruited through advertising or consultation, randomized to placebo in five clinical trials. Variables included demographics, clinical history, efficacy, compliance, and completion data. Homogeneity was demonstrated for most variables. Differences in placebo groups included significantly lower Hamilton Rating Scale for Depression (HAM-D) scores for the advertisement group throughout the trials. Advertisement patients were also more likely to be early placebo responders and in remission at Days 14 and 28. No differences were found in completion rates or reasons for early termination. Compliance was excellent for both groups. Early placebo response of the advertisement group reinforces the need for trials of at least 8 weeks. In addition, consultation patients may have a more severe illness and be treatment resistant, suggesting they are less generalizable to community practice populations.     

Mlcrolasers based on silica microspheres

Light can be confined efficiently in the high-Q, small-volume whispering-gallery-modes observed in silica microspheres. By coupling these microspheres to eroded optical fibers and fiber tips, direct mapping of the whispering-gallery modes has been achieved and the mode numbers have been assessed. The properties of these modes have allowed us to obtain laser action with very low thresholds in Nd-doped silica microspheres. Further projects in the field of non-linear optics and cavity quantum electrodynamics are described.     

Implementations of a four-level mechanical architecture for fault-tolerant robots

This paper describes a fault tolerant mechanical architecture with four levels devised and implemented in concert with NASA (Tesar, D. & Sreevijayan, D., Four-level fault tolerance in manipulator design for space operations. In First Int. Symp. Measurement and Control in Robotics (ISMCR '90), Houston, Texas, 20–22 June 1990.) Subsequent work has clarified and revised the architecture. The four levels proceed from fault tolerance at the actuator level, to fault tolerance via in-parallel chains, to fault tolerance using serial kinematic redundancy, and finally to the fault tolerance multiple arm systems provide. This is a subsumptive architecture because each successive layer can incorporate the fault tolerance provided by all layers beneath. For instance a serially-redundant robot can incorporate dual fault-tolerant actuators. Redundant systems provide the fault tolerance, but the guiding principle of this architecture is that functional redundancies actively increase the performance of the system. Redundancies do not simply remain dormant until needed. This paper includes specific examples of hardware and/or software implementation at all four levels.     

Molecular and geographic patterns of tuberculosis transmission after 15 years of directly observed therapy

Stevioside is a sweet-tasting glycoside, composed of stevia, a diterpenic carboxylic alcohol with three glucose molecules, mainly used as a substitute for non-alcoholic sweetener. It has previously been shown to reduce blood pressure in studies in animals and human. The effect of intravenous stevioside on the blood pressure was studied in spontaneously hypertensive rats (SHR). The hypotensive effect on both systolic and diastolic blood pressure was dose-dependent for intravenous doses of 50, 100 and 200 mg/kg in conscious SHR. The maximum reductions in systolic and diastolic blood pressure were 31.4 +/- 4.2% and 40.8 +/- 5.6% (mean +/- SEM) respectively and the hypotensive effect lasted for more than 60 min with a dose of 200 mg/kg. Serum dopamine, norepinephrine and epinephrine levels were not changed significantly 60 min after intravenous injection of stevioside 100 mg/kg in anesthetized SHR. The present data show that stevioside given intravenously to conscious SHR was effective in blood pressure reduction and there was no change in serum catecholamines in anaesthetized animals with this natural compound.     

Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strength

The mechanical properties of mineral-filled polypropylene (PP) are determined not only by the size, shape and modulus of the filler particles, but also by microstructure. For example, poor impact strength is correlated with a high capacity for nucleation of crystallization. In the present study, optical microscopy has been used to measure the growth rate of spherulites in PP. In tandem with this, isothermal d.s.c. measurements have been made of the crystallization of the PP filled with talc, calcium carbonate and stearate-coated carbonate at different loading levels. Computer simulation of spherulite growth has been used to derive the number of nucleating sites per unit volume of polymer and, using surface area measurements, the number of sites per unit area of mineral surface was obtained. Values for talc were, as expected, considerably higher than those for carbonate (and especially coated carbonate) fillers. The presence of filler affects not only the nucleation and kinetics of the crystallization process but also the crystallinity and orientation indices and the proportion of β-phase crystallites present. The connection between these factors and impact strength is discussed. It is concluded that impact properties are determined by inter alia crack pinning and blocking by filler particles, stress concentrations at the edges of the filler particles, and the nucleating ability of the filler.     

Indentation Creep in Single-Crystal Cubic Zirconia at Room Temperature

Indentation creep of yttria- and calcia-fully-stabilized single-crystal zirconia has been observed at room temperature. The Knoop hardnesses decreased by 15% and 12% of their conventional short-time values, respectively, for indentation times of 100000 s.     

Dielectric properties of polyarylate (PAr) around the glass transition

Dielectric characterization of the α-relaxation in polyarylate (PAr) has been carried out by means of a dielectric spectroscopy technique in a frequency range of 10–30 kHz. Complementary thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry d.s.c.) measurements have also been performed. The results are interpreted in terms of the standard Cole-Cole plot and Havriliak-Negami distribution for the dielectric relaxation times. Information about the temperature and frequency dependence of a.c. conductivity is also obtained from the experimental curves. However, the behaviour of the main dielectric relaxation time is deduced from the experimental data in a wide range of temperature around the glass transition. This behaviour results in close agreement with the theoretical predictions of a free-volume approach for the dielectric α-relaxation recently proposed by the authors.     

Design and analysis of single-factor experiments: Analysis of variance of the effect of rice husk ash and commercial fillers in NR compounds

Summary White rice husk ash (WRHA) and black rice husk ash (BRHA) were incorporated into natural rubber (NR) using a laboratory-sized two-roll mill. A conventional vulcanization system was used for curing and physical tests of the NR vulcanized involved determining of tensile and tear resistances. For comparison purposes, precipitated silica (Zeosil-175) and carbon black (N774) were used too. Using the analysis of variance of single-factor experiments, it can be concluded that: BRHA is non-reinforcing filler and its use is limited to 20 phr; WRHA is semi-reinforcing filler and the variation of filler loading (0 up to 50 phr) causes the maximum variation upon tensile strength of NR compounds; and, that although carbon black and silica are reinforcing fillers, a real reinforcement is reached up to 20 phr for tensile strength.     

Enhancing decentralized service discovery in open service-oriented multi-agent systems

Service-oriented multi-agent systems are dynamic systems that are populated by heterogeneous agents. These agents model their functionality as services in order to allow heterogeneous agents or other entities to interact with each other in a standardized way. Furthermore, due to the large-scale and adaptative needs of the system, traditional directory facilitators or middle-agents are not suitable for the management of agent services. This article proposes the introduction of homophily in service-oriented multi-agent systems to create efficient decentralized and self-organized structures where agents have a greater probability of establishing links with similar agents than with dissimilar ones. This similarity is based on two social dimensions: the set of services that an agent provides and the organizational roles that it plays. A second contribution is an algorithm for service discovery that it is carried out taking into account the local information that is related to the homophily between agents. The experiments compare our proposal with other proposals in distributed environments. The results show that the proposed structure and algorithm offer desirable features for service discovery in decentralized environments. Specifically, these features provide short paths and a high success rate in the service discovery process and resilience under deliberate failures.