Results of benchmark calculations based on OLHF-1 test

The subject of this paper is to compare the results of the different calculations performed by the benchmark participants in the framework of the OECD Lower Head Failure (OLHF) program. The benchmark consists in the finite element (FE) calculation or in analytical calculations of the mechanical behavior of the OLHF-1 experiment. Seven participants from six countries and seven companies or organizations (AVN, VTT, GRS, UJV, SNL, IPSN and CEA) have performed the benchmark.The OLHF experiment program extends the NRC-sponsored SNL LHF program (NUREG/CR-5582) completed in 1998: these experiments where intended to simulate the thermal/mechanical loads to a 1/4.85-scale model of a reactor pressure vessel. The pressure vessel material (SA533B1 steel) used in these experiments is prototypic of reactor PWR vessel material and has been well characterized by material property testing as part of this program. The OLHF tests advance the results of the previous testing program by examining the effects of large temperature differences across the vessel wall. Large temperature differences in excess of 150–400 K are more prototypic of accident conditions.Most of the participants performed 2-D axisymmetric analyses and doesn’t study the crack opening. The global mechanical behaviour of OLHF-1 experiment is well represented but prediction of the maximum vertical displacement is not in good agreement with the experimental value. Failure time and location are in quite good agreement with experimental results but large discrepancies are observed on the mode of failure: creep or plasticity. To improve predictions, more investigation and work is needed on the choice of the failure criteria and failure mode.     

Fast and Compact 16 by 16 Cellular Neural Network Implementation

The paper presents a Cellular Neural Network implementation based on a high gain sigmoid operation. The required simplifications to the original theory are described that allow the use of high gain. With this design black and white images can be processed. The basic building blocks in a cell are described. A 16×16 cells network has been designed and processed with 1.2 micron CMOS technology. Measurement results which show the operation of the network are presented.     

Responses of the autonomic nervous system during periods of perceived high and low work stress in younger and older female teachers

The aim of this study was to examine the response of the autonomic nervous system in younger (mean age 31 yrs, n=14) and older (mean age 54 yrs, n=14) healthy female teachers during work periods of perceived high and low stress. In the younger participants, heart rate, cortisol excretion rate and psychosomatic symptoms were significantly higher during the high work stress period. The older participants experienced no decrease in their heart rate and cortisol excretion during the low stress period and they exhibited no significant decrease in blood pressure after the work in the evening during both periods. It may be concluded that the recovery from the stress in the older teachers was insufficient particularly in view of their elevated diastolic blood pressure during the low work stress period. Ergonomic and individually tailored measures in terms of work time control, specific relaxation techniques, and a part-time retirement may improve the stress management of older teachers.     

Wireless Face Interface: Using voluntary gaze direction and facial muscle activations for human-computer interaction

The present aim was to investigate the functionality of a new wireless prototype called Face Interface. The prototype combines the use of voluntary gaze direction and facial muscle activations, for pointing and selecting objects on a computer screen, respectively. The subjective and objective functionality of the prototype was evaluated with a series of pointing tasks using either frowning (i.e., frowning technique) or raising the eyebrows (i.e., raising technique) as the selection technique. Pointing task times and accuracies were measured using three target diameters (i.e., 25, 30, 40 mm), seven pointing distances (i.e., 60, 120, 180, 240, 260, 450, and 520 mm), and eight pointing angles (0°, 45°, 90°, 135°, 180°, 225°, 270°, and 315°). The results showed that the raising technique was faster selection technique than the frowning technique for the objects that were presented in the pointing distances from 60 mm to 260 mm. For those pointing distances the overall pointing task times were 2.4 s for the frowning technique, and 1.6 s for the raising technique. Fitts’ law computations showed that the correlations for the Fitts’ law model were r = 0.77 for the frowning technique and r = 0.51 for the raising technique. Further, the index of performance (IP) value was 1.9 bits/s for the frowning technique and 5.4 bits/s for raising the eyebrows technique. Based on the results, the prototype functioned well and was adjustable so that two different facial activations can be used in combination with gaze direction for pointing and selecting objects on a computer screen.     

Surrogate-based optimization of a periodic rescheduling algorithm

Periodic rescheduling is an iterative method for real-time decision-making on industrial process operations. The design of such methods involves high-level when-to-schedule and how-to-schedule decisions, the optimal choices of which depend on the operating environment. The evaluation of the choices typically requires computationally costly simulation of the process, which—if not sufficiently efficient—may result in a failure to deploy the system in practice. We propose the continuous control parameter choices, such as the re-optimization frequency and horizon length, to be determined using surrogate-based optimization. We demonstrate the method on real-time rebalancing of a bike sharing system. Our results on three test cases indicate that the method is useful in reducing the computational cost of optimizing an online algorithm in comparison to the full factorial sampling.     

Higher-order modelling of the diffusion dynamics in a bipolar transistor

A higher-order diffusion model for a bipolar transistor has been developed. This model is based on the Padé approximation of the quasi-static expansions of the base and collector currents and gives improved accuracy for the simulation of fast transients and periodic operation at high frequencies. the effect of higher-order circuit elements on accuracy is demonstrated by calculating the transient response to a step excitation and by determining the scattering parameters of a transistor model with higher-order elements linearized about an operating point. the higher-order model is replaced by an equivalent circuit including only conventional elements, and the transient behaviour of these two models is compared.     

Improving R&D processes by an ISO 9001-based Quality Management System

This paper presents practical experience in planning, implementing, and adopting a Quality Management System (QMS) for embedded systems development at VTT Electronics. The main objective for the development of the QMS was to make it practical for real-life embedded systems research and development (R&D) projects. We have applied the ISO 9001 standard and ISO 9000–3 guidelines in building the quality system. From our personnel's point of view, the most important parts of the system have been document skeletons and plan templates that were made accessible to everyone. One of the major quality improvement resulting from the use of the QMS has been the enhanced predictability of R&D projects. This makes it possible for the organization to concentrate on essential matters. From our clients' point of view, we have clearly improved the quality of our R&D services in terms of the customer satisfaction index. Based on QMS auditing activities, we have been able to evaluate and tune our R&D procedures in a systematic manner. We have decided to use Total Quality Management and Quality Award frameworks in the further development of the QMS. Customer service and human resources management are examples of important areas for further quality improvement.     

Effect of skull resistivity on the spatial resolutions of EEG and MEG

The resistivity values of the different tissues of the head affect the lead fields of electroencephalography (EEG). When the head is modeled with a concentric spherical model, the different resistivity values have no effect on the lead fields of the magnetoencephalography (MEG). Recent publications indicate that the resistivity of the skull is much lower than what was estimated by Rush and Driscoll. At the moment, this information on skull resistivity is, however, slightly controversial. We have compared the spatial resolution of EEG and MEG for cortical sources by calculating the half-sensitivity volumes (HSVs) of EEG and MEG as a function of electrode and magnetometer distance, respectively, with the relative skull resistivity as a parameter. Because the spatial resolution is related to the HSV, these data give an overview of the effect of these parameters on the spatial resolution of both techniques. Our calculations show that, with the new information on the resistivity of the skull, in the spherical model for cortical sources the spatial resolution of the EEG is better than that of the MEG.     

Repeatability estimates for milk coagulation traits and non-coagulation of milk in Finnish Ayrshire cows

Effects of systematic environmental factors and milk production and quality traits on milk coagulation properties (MCP), and on repeatability of those traits were estimated from 979 milk samples collected once a month over a period of 2 years from 83 Finnish Ayrshire cows. Estimation was based on a multitrait animal model and REML methodology. In addition, persistence of non-coagulation of milk in individual cows, and factors associated with it were established from a sub sample of 24 cows producing non-coagulating (NC) milk at least once. MCP were at their best during the first lactation, at the beginning and at the end of lactation, and during grazing seasons. Variation in MCP with systematic environmental factors was partly due to variation in composition and quality of milk, especially in pH and ln (somatic cell count, SCC). Coefficients of repeatability for milk coagulation time and curd firmness were 0.65 and 0.68. These estimates were of the same magnitude as those for protein content, but were higher than those for daily milk yield, fat content, pH, and SCC. Based on the repeatability estimates for the milk coagulation traits and effects of the environmental factors, cows should be sampled at least three times during a lactation to estimate reliably breeding values for the milk coagulation traits. A total of 10% of the milk samples did not coagulate in 30 min after addition of rennet. Cows that produced NC milk at least once (30% of the cows) could be classified into those that produced NC milk only a few times during a lactation and those that produced NC milk at almost every sampling. Based on logistic regression analyses, peak and mid-lactation, high milk yield, low protein and fat content and high pH increased the risk of non-coagulation of milk.