A survey of nitrate and nitrite content of fruit and vegetables grown in Slovenia during 1996-2002

Monitoring of nitrate (NO₃^-) and nitrite (NO₂^-) content in agricultural products in Slovenia has been carried out since 1996. The results of monitoring over the period 1996-2002 are presented. During this time 924 samples of 14 different agricultural products (potato, lettuce, apples, carrot, silage maize, cabbage, grapes, peaches, string beans, cereals, pears, cucumbers, strawberries and tomato) were analysed. The samples were taken at the time of maturity directly from growing sites and they were analysed using segmented flow analysis. The average nitrate contents were the highest in lettuce (1074 mg kg^-1), cabbage (881 mg kg^-1), string beans (298 mg kg^-1) and carrot (264 mg kg^-1), and they were moderately high in potato (158 mg kg^-1), silage maize (122 mg kg^-1), strawberries (94 mg kg^-1), cucumbers (93 mg kg^-1) and cereals (49 mg kg^-1). Low nitrate contents (below 6 mg kg^-1) were found in fruit (grapes, peaches, apples and pears) and tomato. With the exception of cereals (8.9 mg kg^-1), apples (1.5 mg kg^-1), potato (1.2 mg kg^-1) and pears (1.0 mg kg^-1) the content of nitrites did not exceed 0.5 mg kg^-1. It may be concluded that the results of the monitoring were in most cases similar to the results of investigations obtained in other countries.     

Criteria for local myocardial electrical activation: effects ofelectrogram characteristics

The ability of several variables to distinguish unipolar deflections due to local activation from those due to nonlocal activity is studied. A model of polyphasic deflections based on atrial recordings during reentrant tachycardia was used to facilitate distinction of local and distant activity by methods independent of the test variables. The performances of variables were assessed by comparing areas under receiver operating characteristic curves. Optimal thresholds of test variables were identified by maximizing statistics which corrected for the pretest probability of local activation. It was found that the greatest negative first derivative of the unipolar potential discriminated between local and distant ventricular signals, but performed less well than the ratio of the first derivative to the potential for distinguishing between local atrial signals and distant ventricular signals. A linear combination of the potential and the ratio of the first derivative and the potential performed well for all groups of signals studied. Optimal criteria for detecting local activation are discussed     

Gap Junctional Communication via Connexin43 between Purkinje Fibers and Working Myocytes Explains the Epicardial Activation Pattern in the Postnatal Mouse Left Ventricle

The mammalian ventricular myocardium forms a functional syncytium due to flow of electrical current mediated in part by gap junctions localized within intercalated disks. The connexin (Cx) subunit of gap junctions have direct and indirect roles in conduction of electrical impulse from the cardiac pacemaker via the cardiac conduction system (CCS) to working myocytes. Cx43 is the dominant isoform in these channels. We have studied the distribution of Cx43 junctions between the CCS and working myocytes in a transgenic mouse model, which had the His-Purkinje portion of the CCS labeled with green fluorescence protein. The highest number of such connections was found in a region about one-third of ventricular length above the apex, and it correlated with the peak proportion of Purkinje fibers (PFs) to the ventricular myocardium. At this location, on the septal surface of the left ventricle, the insulated left bundle branch split into the uninsulated network of PFs that continued to the free wall anteriorly and posteriorly. The second peak of PF abundance was present in the ventricular apex. Epicardial activation maps correspondingly placed the site of the first activation in the apical region, while some hearts presented more highly located breakthrough sites. Taken together, these results increase our understanding of the physiological pattern of ventricular activation and its morphological underpinning through detailed CCS anatomy and distribution of its gap junctional coupling to the working myocardium.     

Mechanism of Oxide Nucleation in Lithium Aluminosilicate Glass-Ceramics

A commercial lithium aluminosilicate glass-ceramic material is investigated by high-resolution transmission electron microscopy after different heat treatments. Evidence is presented that epitaxy of β-quartz crystals on ZrTiO₄-type crystallites is the critical step initiating silicate crystallization.     

Einfluß des totvolumens auf die Al2O3-CVD-Abscheidung

The influence of the free gas volume around the substrate on the chemical vapor deposition of Al₂O₃ layers in the AlCl₃/H₂/CO₂ system at different pressures and temperatures has been studied. Through the water gas reaction which occurs homogeneously in the gas phase, the Al₂O₃ growth rate increases with increasing free gas volume until a certain volume is reached, after which it remains constant. For this ‘critical free gas volume’ a theoretical characteristic dimension L_max is introduced. It is defined as the normal distance from a substrate surface, at which the water molecules formed from the CO₂ + H₂ in the gas phase can no longer reach the substrate surface in the time available. The dependencies of L_max on pressure, temperature and gas flow rate deduced through this theoretical consideration show agreement with the experimental results.

Zusammenfassung

Der Einfluß des die Substrate umgebenden Totvolumens auf die Al₂O₃-CVD-Abscheidung im System AlCl₃/H₂/CO₂ wurde systematisch bei verschiedenen Drücken und Temperaturen untersucht. Durch die homogen in der Gasphase ablaufende Wassergasreaktion nimmt in allen Fällen die Abscheidungs-geschwindigkeit mit vergrößerten Totvolumen zuerst zu, bleibt aber ab einer bestimmten Totvolumensgröße konstant. Für diese “kritische Totvolumensgröße” wird die theoretische Kenngröße L_max eingeführt. Diese Größe ist als Normalabstand zur Substratoberfläche definiert, bei dem das in der Gasphase aus CO₂ + H₂ gebildeten Wasser in der zur Verfügung stehenden Zeit die mit AlCl₃ belegte Oberfläche der Substrate nicht mehr erreichen kann. Die aus dieser theoretischen Überlegung abgeleiteten Voraussagen über die Abhängigkeit des L_max von Druck, Temperatur und Gasströmungsgeschwindigkeit zeigten Übereinstimmung mit den Versuchsergebnissen.     

Restoration of stormwater retention capacity at the allotment-scale through a novel economic instrument

Urbanisation results in changes to runoff behaviour which, if not addressed, inevitably degrade receiving waters. To date, most stormwater management has focussed on the streetscape and public open space. Given that much of the catchment imperviousness is located on private land, we developed and tested a novel economic instrument (a uniform price auction) for encouraging allotment-scale stormwater retention. We evaluated bids using an integrated environmental benefit index (EBI), based on the ability of the proposed works to reduce runoff frequency, pollutant loads and to reduce potable water demand. The uniform price auction resulted in 1.4 ha of impervious areas being effectively 'disconnected' from the stormwater system. The EBI provided an objective and transparent method of comparing bids, which varied in the type of works proposed (e.g. rainwater tank, rain-garden), the cost and the resulting environmental benefit. Whilst the pilot auction was a success, the public subsidy of works undertaken was around 85%, meaning that property owners a relatively small private benefit in the works. Future auction rounds will be revised to (i) test an EBI which is more focussed on the protection of streams (assessing changes to runoff frequency, baseflow volumes and water quality) and (ii) provide an auction process which is simpler to understand, and provides greater practical support for landholders who wish to undertake works.     

Multifunctional Gadolinium‐Doped Mesoporous TiO2 Nanobeads: Photoluminescence,Enhanced Spin Relaxation,and Reactive Oxygen Species Photogeneration,Beneficial for Cancer Diagnosis and Treatment

Materials with controllable multifunctional abilities for optical imaging (OI) and magnetic resonant imaging (MRI) that also can be used in photodynamic therapy are very interesting for future applications. Mesoporous TiO₂ sub‐micrometer particles are doped with gadolinium to improve photoluminescence functionality and spin relaxation for MRI, with the added benefit of enhanced generation of reactive oxygen species (ROS). The Gd‐doped TiO₂ exhibits red emission at 637 nm that is beneficial for OI and significantly improves MRI relaxation times, with a beneficial decrease in spin–lattice and spin–spin relaxation times. Density functional theory calculations show that Gd³⁺ ions introduce impurity energy levels inside the bandgap of anatase TiO₂, and also create dipoles that are beneficial for charge separation and decreased electron–hole recombination in the doped lattice. The Gd‐doped TiO₂ nanobeads (NBs) show enhanced ability for ROS monitored via ^?OH radical photogeneration, in comparison with undoped TiO₂ nanobeads and TiO₂ P25, for Gd‐doping up to 10%. Cellular internalization and biocompatibility of TiO₂@x Gd NBs are tested in vitro on MG‐63 human osteosarcoma cells, showing full biocompatibility. After photoactivation of the particles, anticancer trace by means of ROS photogeneration is observed just after 3 min irradiation.     

A Multidirectional Occlusion Shading Model for Direct Volume Rendering

In this paper, we present a novel technique which simulates directional light scattering for more realistic interactive visualization of volume data. Our method extends the recent directional occlusion shading model by enabling light source positioning with practically no performance penalty. Light transport is approximated using a tilted cone‐shaped function which leaves elliptic footprints in the opacity buffer during slice‐based volume rendering. We perform an incremental blurring operation on the opacity buffer for each slice in front‐to‐back order. This buffer is then used to define the degree of occlusion for the subsequent slice. Our method is capable of generating high‐quality soft shadowing effects, allows interactive modification of all illumination and rendering parameters, and requires no pre‐computation.