A new method forin-situ measurement of electrical resistivity of reinforced concrete

A new method is described for thein-situ measurement of electrical resistivity of concrete structures. The method is based on the early work of J. Newman who calculated the electrolyte resistivity between a disk and a counter electrode located at infinity. This method has the advantage compared with Wenner's of using a single small electrode for the measurements. In this paper, results are presented comparing this method with Wenner's and with results carried out using a conductivity cell in electrolytes. Finally, values of resistivity are compared to corrosion intensity, and a threshold for active corrosion is suggested.

---

Résumé On décrit une nouvelle méthode de mesure de la résistivité électrique du béton dont la technique est basée sur un travail ancien de J. Newman qui avait calculé la résistivité entre un disque et une électrode auxiliaire placée à l'infini. Comparée à la méthode de Wenner, cette méthode présente l'avantage de n'utiliser, pour les mesures, qu'une petite électrode. Dans cet article, on présente les résultats de la comparaison établie avec la méthode de Wenner et avec les résultats obtenus avec une cellule de conductivité placée dans les électrolytes. Enfin, on compare les valeurs de la résistivité du béton avec celles de l'intensité de la corrosion et on suggère un seuil de corrosion active.

---

---

Editorial note Camen Andrade and Maria-Cruz Alonso are working at the Instituto Eduardo de Torroja which is a RILEM Titular Member. Dr. Andrade, who was the 1986 RILEM Medallist, have had all these years great responsibilities within RILEM. Chairlady of the Advisory Technical Committee until 1993, she is now a member of the Coordinating Committee. She is active in 116-PCD Technical Committee on Permeability of Concrete as a Criterion of its Durability and has been appointed chairdlady of 154-EMC Technical Committee on Electrochemical Techniques for Measuring Metallic Corrosion. Carmen Andrade has been appointed RILEM Fellow in 1995.     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

Electrochemical determination of rusted steel surface stability

The stability of a rusted steel surface exposed to a 0.11 M sodium sulphate solution has been studied. Electrochemical impedance spectroscopy, polarization resistance and atomic absorption analysis techniques were used in conjunction with mild steel specimens rusted in a rural atmosphere and treated with different concentrations of phosphoric acid. Since most of the impedance diagrams obtained differ from the typical semicircle, it is not clear how to obtain kinetic information on the corrosion process. The polarization resistance technique gives more useful data.     

Electrochemical reduction of nitrate on Pt(S)[n(1 1 1) × (1 1 1)] electrodes in perchloric acid solution

The electrochemical reduction of nitrate ion was studied by cyclic voltammetry on Pt(1 1 1) and [n(1 1 1) × (1 1 1)] stepped Pt surfaces, where n (=14, 10, 7, 6, 5, 4, 3, 2) is the number of terrace atoms, in 0.1 M HClO₄ + 10 mM KNO₃. The electrocatalytic nitrate reduction was found to hardly proceed on Pt(1 1 1) in the hydrogen adsorption region, while the electrocatalytic activity was improved with the increase in the step density. Inactivation was observed in the presence of adsorbed hydrogen or nitrate-derived reduced adsorbate, i.e. adsorbed NO, on (1 1 1) step sites. It was, therefore, concluded that the electrocatalytically active NO₃⁻ species does not adsorb on the (1 1 1) terraces but on the (1 1 1) monoatomic steps. The nitrate reduction current increased with the step density in a non-linear relationship. The overall current density at 0.21 V (RHE) corresponding to the peak potential of the main electrocatalytic nitrate reduction wave which was maximum at n = 2, abruptly increased with short terraces, i.e. n < 5, where the current wave of adsorbed hydrogen on the Pt stepped surface with comparatively narrow (1 1 1) terraces, denoted as H_nt, also appeared unmodified for n < 5 on voltammograms recorded in 0.1 M HClO₄ in the absence of nitrate.     

An empirically validated simulation for understanding the relationship between process conformance and technology skills

Software development is a fast-paced environment where developers need constant update to ever-changing technologies. Furthermore, process improvement initiatives have been proven useful in increasing the productivity of a software organization. As such, these organizations need to decide where to invest their training budget. As a result, training in technological update to their workforce or training in process conformance with its productive processes become conflicting alternatives. This paper presents a system dynamics simulation of a software factory product line. The objective of this simulation is to understand the changes in behavior when selecting either one of the above-training alternatives. The system dynamics model was validated with an expert panel, and the simulation results have been empirically validated—using statistical process control—against the performance baseline of a real software development organization. With the simulation under statistical control and performing like the baseline, the independent variables representing process conformance (process training) and technology skills (skills training) were modified to study their impact on product defects and process stability. Our results show that while both variables have positive impact on defects and process stability, investment in process training results in a process with less variation and with fewer defects.     

A non-linear forecasting system for the Ebro River at Zaragoza,Spain

This paper addresses the problem of modelling and forecasting river flows and levels based on flood routing type models. Though this is generally considered as a non-linear problem, very often it is treated by linear models. A forecasting system is built for the level and flow measurements registered in the Ebro River at the station of Zaragoza (Spain), with the main purpose of preventing floods in an early stage of development. The model takes advantage of the wealth of data available at the Ebro Hydrographical Confederation and is non-linear in essence. The system is obtained by application of system identification tools, starting from a linear specification and relating the parameters of the model estimated to some transformation of the input in the system. Such transformation requires the application of a Kalman Filter in a particular set up and the full estimation algorithm involves an iterative procedure. The model is fully developed on a data set and is thoroughly validated on a different span of data.     

Electrochemical reduction of oxygen on palladium nanocubes in acid and alkaline solutions

The electrocatalytic properties of cubic palladium nanoparticles towards the electrochemical reduction of oxygen were studied in acid and alkaline solutions and compared with those of spherical nanoparticles and bulk Pd. The synthesised Pd nanoparticles were characterised by transmission electron microscopy (TEM) and X-ray diffraction (XRD). Electrooxidation of pre-adsorbed CO was employed for cleaning the palladium catalyst surface. Oxygen reduction was studied using the rotating disk electrode (RDE) method and enhanced electrocatalytic activity of Pd nanocubes was revealed both in acid and alkaline solutions, which was attributed to the prevalence of Pd(1 0 0) facets. The mechanism of oxygen reduction on Pd nanoparticles was similar to that on bulk Pd, the first electron transfer being the rate-limiting step, and the reaction predominantly followed a four-electron pathway in both solutions.     

Adaptive input shaping for single-link flexible manipulators using an algebraic identification

This work proposes an adaptive control scheme applied to single link-flexible manipulators, which combines a feedback controller of the joint angle with an adaptive input shaper updated by an algebraic non-asymptotic identification. The feedback controller is designed to guarantee trajectory tracking of the joint angle, simplifying thus the input shaper, which can be designed for the arm dynamics only. The input shaper is updated by an algebraic identification of the natural frequency corresponding to the first vibration mode of the arm. In addition, the influence of the assumptions adopted to derive the algebraic identification on the performance of the estimation is studied. Finally, the proposed adaptive control strategy is implemented in practice.     

Germin-like protein Cit s 1 and profilin Cit s 2 are major allergens in orange (Citrus sinensis) fruits

Oranges are clinically relevant allergenic foods. To date, orange allergens have not been characterized in detail. The study is aimed at analyzing the sensitization profile in orange-sensitized subjects with and without clinical allergy, and to identify orange allergens. Fifty-six sensitized subjects with self-reported reactions to orange were grouped into reactors (anaphylaxis or multiple episodes of immediate reactions and/or positive challenge tests) and non-reactors (negative open food challenge tests). Allergens were characterized by IgE immunoblotting, N-terminal sequencing, IgE-inhibition assays, and mediator release assays were performed to determine the allergenic potency of orange profilin. Of 56 subjects, 23 were classified as orange allergic showing mainly an oral allergy syndrome. Of 23 subjects classified as orange allergic, 22 were sensitized to profilin, Cit s 2. In patients with mono-sensitization to profilin in vitro histamine releases up to 75% from basophils were induced using orange extract and purified plant profilins. Of the allergic patients 78% were sensitized to germin-like protein, Cit s 1. Both allergens showed retained IgE reactivity in heat-processed orange juice. Interestingly, subjects with and without clinical allergy showed a comparable sensitization profile. Profilin and germin-like proteins are major orange allergens. The potential clinical relevance of orange profilin was indicated by its strong capacity to release histamine from basophils. However, a predominant sensitization to both allergens in subjects without symptoms also indicates a high frequency of clinically insignificant sensitization.     

Reduction of CO2 on bismuth modified Pt(1 1 0) single-crystal surfaces. Effect of bismuth and poisoning intermediates on the rate of hydrogen evolution

The reduction of CO₂ on bismuth modified Pt(1 1 0) single crystal surfaces has been studied voltammetrically. The effect of bismuth and the amount of formed CO species on the rate of hydrogen evolution has also been investigated. A decrease in the rate of CO₂ reduction is observed due to the modification of the surface with bismuth adsorption. This decrease goes beyond the simple third body effect expected from the blockage of active sites on the platinum surface after bismuth adsorption. However, the hydrogen evolution reaction is relatively insensitive to the presence of adsorbed species, in contrast with previous result reported for Pt(1 1 1) and Pt(1 0 0) surfaces.