Vertical ridge augmentation around dental implants using a membrane technique and autogenous bone or allografts in humans

This study investigated the effect on vertical bone regeneration of the addition of demineralized freeze-dried bone allograft or autogenous bone chips to a membrane technique. Twenty partially edentulous patients with vertical jawbone deficiencies were selected for this study. The patients were divided into two groups of 10 individuals. The 10 patients of Group A received 26 Br?nemark implants in 10 surgical sites. The 10 patients of Group B received 32 implants in 12 surgical sites. Fifty-two out of 58 implants (22 in Group A and 30 in Group B) extended 1.5 to 7.5 mm superior to the bone crest. Titanium-reinforced expanded polytetrafluoroethylene membranes were used to cover the implants and, before complete membrane fixation, demineralized freeze-dried bone allograft particles were condensed under the membrane in Group A, and autogenous bone chips were used in Group B. At the reentry after 7 to 11 months the membranes were removed and a small biopsy was collected from 11 sites comprehending the miniscrews. The clinical measurements from Group A demonstrated a mean vertical bone gain of 3.1 mm (SD = 0.9 mm, range 1 to 5 mm) with a mean percentage of bone gain of 124% (SD = 46.6%). The measurements from Group B showed a mean vertical bone gain of 5.02 mm (SD = 2.3 mm, range 1 to 8.5 mm) with a mean percentage of bone gain of 95% (SD = 26.8%). Histomorphometric analysis of the present study clearly demonstrated a direct correlation between the density of the pre-existing bone and the density of the regenerated bone. The mean percentage of new bone-titanium contact was from 39.1% to 63.2%, depending on the quality of the pre-existing bone. Both the clinical and histologic results indicate a beneficial effect of the addition of demineralized freeze-dried bone allograft or autogenous bone particles to vertical ridge augmentation procedures in humans.     

Detection of human papillomavirus DNA in laryngeal squamous cell carcinoma by polymerase chain reaction

Although human papillomaviruses (HPVs) have been found in many, but not all, tumours of the oral cavity, nose, pharynx and larynx, the true role of HPV in malignant tumours of the head and neck is still unclear. The presence of HPV DNA was investigated in 45 fresh squamous cell carcinoma (SCC) specimens and in 29 normal mucosa specimens collected from 45 primary laryngeal SCC patients. HPV DNA was detected using the polymerase chain reaction (PCR) with consensus primers that detect HPV types 6, 11, 16 and 18.9 of the 45 patients (20%) were HPV positive; the presence of HPV was also detected in the corresponding normal laryngeal mucosa of four of the 29 specimens (14%). No statistically significant differences were found between the presence of HPV DNA in normal specimens and in neoplastic mucosa specimens. No correlation was found between HPV DNA positive tumours and size, T classification, lymph node involvement and histological grading. This study adds further evidence suggesting a possible role of HPV DNA infection in laryngeal carcinogenesis.     

Degradation of lincomycin in aqueous medium: Coupling of solar photocatalysis and membrane separation

The photocatalytic oxidation of a common antibiotic, the lincomycin was carried out in aqueous suspensions of polycrystalline TiO₂ Degussa P25 irradiated by sunlight. In order to improve the performance of the lincomycin degradation a hybrid system consisting of a solar photoreactor with the photocatalyst in suspension coupled with a membrane module, used to confine both photocatalyst and pollutants in the reaction environment, was tested.A preliminary study was carried out in order to determine some kinetics parameters of the drug photodegradation. The influence of initial substrate concentration on the lincomycin photooxidation rate was investigated. The photooxidation rate follows a pseudo-first order kinetics with respect to the lincomycin concentration under the used experimental conditions. The presence of the membrane reactor allows the catalyst separation and to operate in continuous mode as the membranes rejection for lincomycin and its oxidation products was quite high.     

BRAF Gene and Melanoma: Back to the Future

As widely acknowledged, 40–50% of all melanoma patients harbour an activating BRAF mutation (mostly BRAF V600E). The identification of the RAS–RAF–MEK–ERK (MAP kinase) signalling pathway and its targeting has represented a valuable milestone for the advanced and, more recently, for the completely resected stage III and IV melanoma therapy management. However, despite progress in BRAF-mutant melanoma treatment, the two different approaches approved so far for metastatic disease, immunotherapy and BRAF+MEK inhibitors, allow a 5-year survival of no more than 60%, and most patients relapse during treatment due to acquired mechanisms of resistance. Deep insight into BRAF gene biology is fundamental to describe the acquired resistance mechanisms (primary and secondary) and to understand the molecular pathways that are now being investigated in preclinical and clinical studies with the aim of improving outcomes in BRAF-mutant patients.     

Manufacturing of polypropylene laminates and related structural reorganization in the crystalline phase

The conditions for obtaining recrystallization in more ordered modifications are described for an uniaxially oriented sample of isotactic polypropylene, annealed with fixed ends. These recrystallization conditions are related to the conditions of a lamination process.     

Structural characterization of Ti centres in Ti-silicalite and reaction mechanisms in cyclohexanone ammoximation

The main results obtained by means of many physical methods (IR, Raman, UV-Vis and XAFS spectroscopies) concerning the structure of the Ti centre in titanium silicalite and the reaction intermediates in the ammoximation of cyclohexanone are concisely reviewed.

The Ti is in tetrahedral coordination in vacuo and expands its coordination sphere upon interaction with adsorbates. In the presence of H₂O and H₂O/H₂O₂ solutions one of the SiOTi bridges is hydrolyzed with formation of (SiO)₃L₂TiOH (LH₂O) and (SiO)₃L₂TiOOH species, respectively. When NH₃ is dosed on (SiO)₃L₂TiOOH structures (SiO)₃L₂TiOO⁻NH₄⁺ species are formed. These species are thought to play an important role in the ammoximation reaction. The geometries of the peroxidic species (open or bridged) are discussed also on the basis of ab initio calculations.     

An optimization framework for “build-or-buy” decisions in software architecture

Building a software architecture that meets functional requirements is a quite consolidated activity, whereas keeping high quality attributes is still an open challenge. In this paper we introduce an optimization framework that supports the decision whether to buy software components or to build them in-house upon designing a software architecture. We devise a non-linear cost/quality optimization model based on decision variables indicating the set of architectural components to buy and to build in order to minimize the software cost while keeping satisfactory values of quality attributes. From this point of view, our tool can be ideally embedded into a Cost Benefit Analysis Method to provide decision support to software architects. The novelty of our approach consists in building costs and quality attributes on a common set of decision variables related to software development. We start from a special case of the framework where the quality constraints are related to the delivery time and the product reliability, and the model solution also devises the amount of unit testing to be performed on built components. We generalize the framework formulation to represent a broader class of architectural cost-minimization problems under quality constraints, and discuss advantages and limitations of such approach.     

Degree-Optimal Routing for P2P Systems

We define a family of Distributed Hash Table systems whose aim is to combine the routing efficiency of randomized networks—e.g. optimal average path length O(log ² n/δlog δ) with δ degree—with the programmability and startup efficiency of a uniform overlay—that is, a deterministic system in which the overlay network is transitive and greedy routing is optimal. It is known that Ω(log n) is a lower bound on the average path length for uniform overlays with O(log n) degree (Xu et al., IEEE J. Sel. Areas Commun. 22(1), 151–163, 2004). Our work is inspired by neighbor-of-neighbor (NoN) routing, a recently introduced variation of greedy routing that allows us to achieve optimal average path length in randomized networks. The advantage of our proposal is that of allowing the NoN technique to be implemented without adding any overhead to the corresponding deterministic network. We propose a family of networks parameterized with a positive integer c which measures the amount of randomness that is used. By varying the value c, the system goes from the deterministic case (c=1) to an “almost uniform” system. Increasing c to relatively low values allows for routing with asymptotically optimal average path length while retaining most of the advantages of a uniform system, such as easy programmability and quick bootstrap of the nodes entering the system. We also provide a matching lower bound for the average path length of the routing schemes for any c. This work was partially supported by the Italian FIRB project “WEB-MINDS” (Wide-scalE, Broadband MIddleware for Network Distributed Services), .     

Recent Advances on High-Speed and Holographic Two-Photon Direct Laser Writing

Two-Photon Lithography, thanks to its very high sub-diffraction resolution, has become the lithographic technique par excellence in applications requiring small feature sizes and complex 3D pattering. Despite this, the fabrication times required for extended structures remain much longer than those of other competing techniques (UV mask lithography, nanoimprinting, etc.). Its low throughput prevents its wide adoption in industrial applications. To increase it, over the years different solutions have been proposed, although their usage is difficult to generalize and may be limited depending on the specific application. A promising strategy to further increase the throughput of Two-Photon Lithography, opening a concrete window for its adoption in industry, lies in its combination with holography approaches: in this way it is possible to generate dozens of foci from a single laser beam, thus parallelizing the fabrication of periodic structures, or to engineer the intensity distribution on the writing plane in a complex way, obtaining 3D microstructures with a single exposure. Here, the fundamental concepts behind high-speed Two-Photon Lithography and its combination with holography are discussed, and the literary production of recent years that exploits such techniques is reviewed, and contextualized according to the topic covered.     

From Images to Shape Models for Object Detection

We present an object class detection approach which fully integrates the complementary strengths offered by shape matchers. Like an object detector, it can learn class models directly from images, and can localize novel instances in the presence of intra-class variations, clutter, and scale changes. Like a shape matcher, it finds the boundaries of objects, rather than just their bounding-boxes. This is achieved by a novel technique for learning a shape model of an object class given images of example instances. Furthermore, we also integrate Hough-style voting with a non-rigid point matching algorithm to localize the model in cluttered images. As demonstrated by an extensive evaluation, our method can localize object boundaries accurately and does not need segmented examples for training (only bounding-boxes).