Mapping seagrass species, cover and biomass in shallow waters: An assessment of satellite multi-spectral and airborne hyper-spectral imaging systems in Moreton Bay (Australia)

Understanding, monitoring and modelling attributes of seagrass biodiversity, such as species composition, richness, abundance, spatial patterns, and disturbance dynamics, requires spatial information. This work assessed the accuracy of commonly available airborne hyper-spectral and satellite multi-spectral image data sets for mapping seagrass species composition, horizontal horizontal-projected foliage cover and above-ground dry-weight biomass. The work was carried out on the Eastern Banks in Moreton Bay, Australia, an area of shallow and clear coastal waters, containing a range of seagrass species, cover and biomass levels. Two types of satellite image data were used: Quickbird-2 multi-spectral and Landsat-5 Thematic Mapper multi-spectral. Airborne hyper-spectral image data were acquired from a CASI-2 sensor using a pixel size of 4.0 m. The mapping was constrained to depths shallower than 3.0 m, based on past modelling of the separability of seagrass reflectance signatures at increasing water depths. Our results demonstrated that mapping of seagrass cover, species and biomass to high accuracy levels (> 80%) was not possible across all image types. For each parameter mapped, airborne hyper-spectral data produced the highest overall accuracies (46%), followed by Quickbird-2 and then Landsat-5 Thematic Mapper. The low accuracy levels were attributed to the mapping methods and difficulties in matching locations on image and field data sets. Accurate mapping of seagrass cover, species composition and biomass, using simple approaches, requires further work using high-spatial resolution (< 5 m) and/or hyper-spectral image data. Further work is required to determine if and how the seagrass maps produced in this work are suitable for measuring attributes of seagrass biodiversity, and using these data for modelling floral and fauna biodiversity properties of seagrass environments, and for scaling-up seagrass ecosystem models.     

Investigation of cure kinetics in epoxy/multiwalled carbon nanotube nanocomposites

With the increased interest in thermoset resin nanocomposites, it is important to understand the effects of the material on nanoscale characteristics. In this study, a curing reaction of an epoxy resin, which contained 0.25, 0.50, or 1.00 wt % of multiwalled carbon nanotubes (MWCNTs), at different heating rates was monitored by differential scanning calorimetry; cure kinetics were also evaluated to establish a relationship between crosslinking (network formation) and mechanical properties. MWCNT concentrations above 0.25 wt % favored crosslinking formation and decreased the activation energy (E_a) in the curing reaction. Examination of the kinetic mechanism suggests that the MWCNT locally restricted the spatial volume and favored the formation of nodular morphology in the resin, especially for high MWCNT concentrations. The MWCNT exhibited some entanglement in the matrix, which hindered a more pronounced effect on the mechanical properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39857.     

Assessment of water quality in Lake Garda (Italy) using Hyperion

For testing the integration of the remote sensing related technologies into the water quality monitoring programs of Lake Garda (the largest Italian lake), the spatial and spectral resolutions of Hyperion and the capability of physics-based approaches were considered highly suitable. Hyperion data were acquired on 22nd July 2003 and water quality was assessed (i) defining a bio-optical model, (ii) converting the Hyperion at-sensor radiances into subsurface irradiance reflectances, and (iii) adopting a bio-optical model inversion technique. The bio-optical model was parameterised using specific inherent optical properties of the lake and light field variables derived from a radiative transfer numerical model. A MODTRAN-based atmospheric correction code, complemented with an air/water interface correction was used to convert Hyperion at-sensor radiances into subsurface irradiance reflectance values. These reflectance values were comparable to in situ reflectance spectra measured during the Hyperion overpass, except at longer wavelengths (beyond 700 nm), where reflectance values were contaminated by severe atmospheric adjacency effects. Chlorophyll-a and tripton concentrations were retrieved by inverting two Hyperion bands selected using a sensitivity analysis applied to the bio-optical model. The sensitivity analysis indicated that the assessment of coloured dissolved organic matter was not achievable in this study due to the limited coloured dissolved organic matter concentration range of the lake, resulting in reflectance differences below the environmental measurement noise of Hyperion. The chlorophyll-a and tripton image-products were compared to in situ data collected during the Hyperion overpass, both by traditional sampling techniques (8 points) and by continuous flow-through systems (32 km). For chlorophyll-a the correlation coefficient between in situ point stations and Hyperion-inferred concentrations was 0.77 (data range from 1.30 to 2.16 mg m^− 3). The Hyperion-derived chlorophyll-a concentrations also match most of the flow-through transect data. For tripton, the validation was constrained by variable re-suspension phenomena. The correlation coefficient between in situ point stations and Hyperion-derived concentrations increased from 0.48 to 0.75 (data range from 0.95 to 2.13 g m^− 3) if the sampling data from the re-suspension zone was avoided. The comparison of Hyperion-derived tripton concentrations and flow-through transect data exhibited a similar mismatch. The results of this research suggest further studies to address compatibilities of validation methods for water body features with a high rate of change, and to reduce the contamination by atmospheric adjacency effects on Hyperion data at longer wavelengths in Alpine environment. The transferability of the presented method to other sensors and the ability to assess water quality independent from in situ water quality data, suggest that management relevant applications for Lake Garda (and other subalpine lakes) could be supported by remote sensing.     

First X-ray structure of discrete anion [HgBr5]: Synthesis, characterization and single crystal X-ray structure determination of [Co(NH3)6][HgBr5]

A new cobalt(III) complex salt, [Co(NH₃)₆][HgBr₅](1) was crystallized from a solution of hexaamminecobalt(III)bromide and potassium tetrabromomercurate(II) in aqueous medium in 1:1 molar ratio. This complex salt has been characterized by elemental analyses, spectroscopic techniques (e.g. UV/Visible, IR), solubility product and conductance measurements. The complex salt crystallizes in Orthorhombic crystal system with space group Pnma. Single crystal X-ray structure determination revealed the presence of discrete ions: [Co(NH₃)₆]³⁺ cation and a new anion [HgBr₅]³⁻. This is the first structural report of a complex salt containing this new anion. The structure consists of stacks of cations and anions demonstrating supramolecular arrangements through N–HBr hydrogen-bond interactions. The crystal lattice is stabilized by these non-covalent interactions besides electrostatic interaction.     

Experimental tests of a new hysteretic damper made of buckling inhibited shear panels

Metal shear panels represent a highly performing anti seismic system for medium–high rise buildings located in strong earthquake prone zones. A new configuration of dissipative shear panel is presented in the current paper. The base shear plate is made of a low-strength material, namely the heath treated EN-AW-1050A aluminium alloy, which has been already used by the authors for other types of dissipative shear panels. In this proposed new system, the main buckling modes are inhibited by the application of external devices placed in parallel to the base plate and not directly loaded by the external forces. Two shear panel samples are tested as prototypes, which are based on two different plate buckling inhibition strategies. In the former the out-of-plane displacements of only some parts of the base plate are restrained, whereas in the latter the restraining action of the external device is extended to the whole base plate. Experimental tests are presented in order to prove the performance of the proposed devices in terms of dissipative capacity and stiffness. In addition, the obtained results are compared with the ones related to other more conventional shear panel typologies, characterized by the same geometry and material, but in which buckling phenomena were mitigated by means of welded stiffeners, according to a more traditional practice.     

Using hot-vapor bypass for pressure control in distillation columns

Distillation column control is widely explored in literature due to its complexity and importance in chemical and petrochemical industries.In this process,pressure represents one of the most important variables to be controlled.However,there are few studies about how pressure affects the dynamic behavior of distillation columns and most research on distillation column control involve direct manipulation of cooling fluid through the condenser.Nevertheless,such an approach demands constant changes in cooling fluid flowrates that are commonly by the order of tons per hour,which can be difficult to work or even unfeasible in a real plant.Furthermore,this strategy is usually avoided,as it can cause fouling and corrosion acceleration.The hot-vapor bypass strategy fits well as a solution for these issues,eliminating the need to dynamically manipulate cooling fluid flowrates in the condensation unit.This work presents the modeling and simulation of a conventional distillation column for the separation of water and ethanol,in which a comparative study between a conventional pressure control and a control using hot-vapor bypass was performed.The main results were obtained through dynamic simulations which considered various disturbances in the feed stream,and demonstrated superior performance by the hot-vapor bypass system over the usual scheme proposed in literature,while evaluating the Integral Absolute Error (IAE) norm as the control performance index.     

Microcasting of Al bronze: influence of casting parameters on the microstructure and the mechanical properties

In this work the influence of the casting parameters on the microstructure and the mechanical properties of extremely small parts produced by microcasting was investigated. Different specimens were cast using an aluminum bronze with a composition defined by DIN EN 17 665. It was found that the yield stress and the ultimate tensile strength of micro-tensile test specimens increase when decreasing the mold temperature from 1,000 to 700°C. This correlates with the increasing fineness of the microstructure. Additionally, the investigation showed that the mechanical strength of micro-specimens is higher than the one of macro-specimens cast at the same mold temperature due to a finer microstructure which hinders dislocation movement.     

Seismic performance of MR frames protected by viscous or hysteretic dampers

This study concerns the behaviour of steel frames protected by different anti‐seismic devices (dampers). Typical hysteretic and viscous dampers are arranged in three steel moment‐resisting frames (MRFs) having different dynamical features but are designed to accomplish determined performance objectives. The proposed devices are selected following an iterative procedure based on the use of a suitable damage functional, which has been applied to control the behaviour of the protected structures under a specific seismic record. The outcomes obtained by implementing incremental dynamic analyses, carried out on the basis of seven historical records characterized by different features, allow to analyse the improvement of the structural performance due to the considered dampers and, therefore, to provide design information about their employment. The comparison of results is carried out taking into account the dampers capacity to protect the structures from damage, the inter‐storey drifts, the residual deformations and the possible amplification effects. In conclusion, the equivalent behaviour factors for each damper type are given, with the aim of providing useful design parameters for the implementation of simplified conventional linear analyses. Copyright © 2014 John Wiley & Sons, Ltd.