Mechanical properties of wollastonite‐reinforced polypropylene composites modified with SEBS and SEBS‐g‐MA elastomers

Mechanical properties of isotactic polypropylene/wollastonite/styrene rubber block copolymers (iPP/wollastonite/SRBC) composites were studied as a function of elastomeric poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) triblock copolymer (SEBS) and SEBS grafted with maleic anhydride (SEBS‐g‐MA) content from 0 to 20 vol%. Microphase morphology was stronger influenced by SRBC elastomers than by different wollastonite types. Higher encapsulation ability of SEBS‐g‐MA than SEBS caused more expressive core‐shell morphology and consequently higher notched impact strength as well as yield parameters, but lower Young's modulus. Higher ductility of the composites with SEBS than with SEBS‐g‐MA has been primarily caused by better miscibility of the polypropylene chains with SEBS molecules. Surface properties of components and adhesion parameters also indicated that adhesion at SEBS‐g‐MA/wollastonite interface, which was stronger than the one at the SEBS/wollastonite interface, influenced higher encapsulation of wollastonite particles by SEBS‐g‐MA. POLYM. ENG. SCI., 47:1873–1880, 2007. © 2007 Society of Plastics Engineers     

Morphology and mechanical properties of poly(propylene)/polystyrene blends compatibilized with polystyrene-block-poly(ethylene-co-propylene)

Compatibilizing effects of diblock copolymer polystyrene-block-poly(ethylene-co-propylene) (SEP) on the morphology and mechanical properties of immiscible blends of poly(propylene) (PP) and polystyrene (PS) were investigated. Notched impact strength, yield stress, elongation at yield and Young's modulus were determined as a function of different weight ratios of PP and PS and different amounts of added SEP as well. Scanning electron microscopy revealed a two-phase morphology of PP/PS blends, which exhibit poor mechanical properties. Even 2,5 wt.-% of SEP added to PP/PS blends can improve the notched impact strength and elongation at yield compared to non-compatibilized PP/PS blends. 10 wt.-% of SEP compatibilizer converted the brittle PP/PS blend to quite impactresistant polymeric material. Mechanical properties were improved because of the morphological changes and increased interfacial adhesion as a result of SEP localization between PP and PS phases. An analysis of yield stress data in terms of theoretical models showed that yield stress values of binary PP/PS blends can be predicted with Nielsen's model.     

Composition and seasonal variation of fatty acids of <Emphasis Type="Italic">Diplodus vulgaris</Emphasis> L. from the Adriatic Sea

Muscle tissue from the common two-banded sea bream Diplodus vulgaris L. originating from the Adriatic Sea, Croatia, was analyzed. The FA composition of neutral (TAG) and polar (PE, PC, PI/PS) lipid classes was determined, as well as the lipid and water contents during winter and summer periods. Both the total lipid and water contents were higher in the winter period. We identified 16 different FA. The major constituents of the total FA in both seasons were saturates: palmitic (16∶0) and stearic acids (18∶0); monoenes: oleic (18∶1n−9) and palmitoleic acids (16∶1n−7); and polyunsaturates: arachidonic acid (20∶4n−6), EPA (20∶5n−3), and DHA (22∶6n−3), but their amounts and ratios differed significantly between the two seasons and between lipid fractions. The FA composition showed a noticeable pattern of seasonality that reflected fluctuations mainly in TAG. The diminution of the monounsaturated FA content in the summer was clearly followed by an increase in PUFA content. Diplodus vulgaris is a good source of natural n−3 PUFA and would therefore be suitable for inclusion in highly unsaturated low-fat diets.     

Fatigue crack propagation and damage evolution in PBT-GF and SAN-GF

Our earlier investigations of fatigue behavior in PBT-GF and SAN-GF with different fiber lengths have shown that fatigue crack propagation (FCP) can be described in terms of elastic-plastic fracture mechanics. In this work it is shown that the influence of structural material parameters on the resistance to FCP correlates with the extent of energy dissipation at the crack tip. With increasing fiber length, the zone of energy dissipation is increased. By means of microscopic investigations, the prevailing damage in the zone of energy dissipation is identified as micro cracks in the matrix.     

Polypropylene/silica micro‐ and nanocomposites modified with poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene)

The effects of different silica loadings and elastomeric content on interfacial properties, morphology and mechanical properties of polypropylene/silica 96/4 composites modified with 5, 10, 15, and 20 vol % of poly(styrene‐b‐ethylene‐co‐butylene‐b‐styrene) SEBS added to total composite volume were investigated. Four silica fillers differing in size (nano‐ vs. micro‐) and in surface properties (untreated vs. treated) were chosen as fillers. Elastomer SEBS was added as impact modifier and compatibilizer at the same time. The morphology of ternary polymer composites revealed by light and scanning electron microscopies was compared with morphology predicted models based on interfacial properties. The results indicated that general morphology of composite systems was determined primarily by interfacial properties, whereas the spherulitic morphology of polypropylene matrix was a result of two competitive effects: nucleation effect of filler and solidification effect of elastomer. Tensile and impact strength properties were mainly influenced by combined competetive effects of stiff filler and tough SEBS elastomer. Spherulitic morphology of polypropylene matrix might affect some mechanical properties additionally. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41486.     

Preservative efficacy screening of pharmaceutical formulations using ATP bioluminescence

The preservative challenge test is a method used to determine the efficacy of a preservation system in a pharmaceutical or cosmetic formulation. However, such testing is a labor-intensive, repetitive task often requiring days before results can be generated. Several alternatives to traditional colony-count techniques have been developed. A study using pure suspensions of Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Bacillus subtilis, Candida albicans, and Aspergillus niger showed that the accuracy, repeatability, and linearity of the Pallchek luminometer ATP bioluminescence (ATP-B) system was equivalent to the traditional colony-count method. In any case, the method proved sensitive enough to follow the effect of preservatives on a number of test microorganisms, indicating the applicability of the ATP-B method for preservative screening studies in various pharmaceutical formulations.     

Compatibilization of polypropylene/polystyrene blends with poly(styrene-b-butadiene-b-styrene) block copolymer

The compatibilizing effect of the triblock copolymer poly(styrene-b-butadiene-b-styrene) (SBS) on the morphology and mechanical properties of immiscible polypropylene/polystyrene (PP/PS) blends were studied. Blends with three different weight ratios of PP and PS were prepared and three different concentrations of SBS were used for investigations of its compatibilizing effects. Scanning electron microscopy (SEM) showed that SBS reduced the diameter of the PS-dispersed particles as well as improved the adhesion between the matrix and the dispersed phase. Transmission electron microscopy (TEM) revealed that in the PP matrix dispersed particles were complex “honeycomblike” aggregates of PS particles enveloped and joined together with the SBS compatibilizer. Wide-angle X-ray diffraction (WAXD) analysis showed that the degree of crystallinity of PP/PS/SBS slightly exceeded the values given by the addition rule. At the same time, addition of SBS to pure PP and to PP/PS blends changed the orientation parameters A₁₁₀ and C significantly, indicating an obvious SBS influence on the crystallization process in the PP matrix. SBS interactions with PP and PS influenced the mechanical properties of the compatibilized PP/PS/SBS blends. Addition of SBS decreased the yield stress and the Young's modulus and improved the elongation at yield as well as the notched impact strength in comparison to the binary PP/PS blends. Some theoretical models for the determination of the Young's modulus of binary PP/PS blends were used for comparison with the experimental results. The experimental line was closest to the series model line. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 69: 2625–2639, 1998     

Wollastonite‐reinforced polypropylene composites modified with novel metallocene EPR copolymers. II. Mechanical properties and adhesion

Mechanical properties and adhesion phenomena of isotactic polypropylene/wollastonite/metallocene propylene‐ethylene copolymers (iPP/W/EPR) composites were studied as a function of metallocene propylene‐based copolymers content from 0 to 20 vol%. The composites with different surface treated wollastonites and two types of EPR have shown similar behavior of most mechanical properties except elongation at break and impact strength respective of the difference in some characteristics of used EPR elastomers. The increase and the difference in elongation at break could be explained by renewed spherulitic morphology of the iPP matrix. Stronger interactions between EPR‐1 and two used types of wollastonites than between EPR‐2 and corresponding wollastonites concluded from the surface properties led to the difference in impact strength behavior. The determined mechanical properties confirm the assumption coming out of structural investigations that metallocene EPR elastomers are rather efficient impact modifiers than encapsulation compatibilizers for the iPP/wollastonite composites. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Wet‐phase‐separation membranes from the polysulfone/N,N‐dimethylacetamide/water ternary system: The formation and elements of their structure and properties

Asymmetric and porous polysulfone (PSf) membranes were prepared by wet phase separation. Binary (PSf)/N,N‐dimethylacetamide (DMA) solutions with polymer concentrations of 12.5–30 wt % were cast in thicknesses of 80–700 μm and immersed in a coagulation bath of pure water. The morphology of the formed membranes' cross sections consisted of a cellular structure and macrovoids; the cellular structure density was highest when the cast solution contained about 21 wt % PSf, regardless of the cast thickness. The membranes' pure water permeability decreased as the cast thickness increased. The instantaneous onset of the turbidity, regardless of the PSf content and cast thickness, its steep growth, and relatively high end value were the main characteristics of the turbidity phenomena taking place during the formation of the protomembranes. Again, the membrane‐forming system with a PSf/DMA solution with about 21 wt % polymer, regardless of the cast thickness, had the highest turbidity end value. The shrinkage of the cast solutions into the corresponding protomembrane was also examined quantitatively. Inverse experiments showed that the direction of the gravitation field had no influence on the shrinkage of the membrane‐forming ternary system or the membranes' morphology and its water permeability. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1667–1674, 2005     

Changes occurring in phenolic content,tocopherol composition and oxidative stability of Camelina sativa oil during storage

Changes occurring during storage in the content of polar phenolic compounds, the composition of tocopherols (T), the presence of primary and secondary oxidative products and titratable acidity in oil obtained from the seeds of Camelina sativa were studied. In fresh oil the content of polar phenolic compounds amounted to 128 mg/kg (expressed as chlorogenic acid), the content of α-T was (41 ± 8) mg/kg, of γ-T (710 ± 19) mg/kg and of δ-T (12 ± 3) mg/kg. β-T and tocotrienols were not detected. In oil stored at 50 °C the concentration of total tocopherols decreased to a value of (440 ± 13) mg/kg in 15 days. In that time the content of polar phenolic compounds in the oil stored at 50 °C was reduced to 72% of its initial value. The content of polar phenolic compounds in oil stored at 65 °C for 15 days was reduced to 21% of its initial value. The content of polar phenolic compounds in the C. sativa oil investigated decreased linearly with peroxide value and with p-anisidine value. The antioxidative activity of polar phenolic compounds extracted from camelina oil was also elucidated. Analysis revealed that the phenolic extract obtained from camelina oil added to a model lipid system for a certain time significantly retarded the process of autooxidation.