目标与机会平衡规划法

提出一种目标与机会平衡规划法．基于待决策问题的有效决策前沿曲线形状的全局信息,通过权衡决策目标收益和实现机会两个因素的数值关系以及二者沿有效决策前沿曲线变化速度的对比关系,最大限度地提高决策效用．该方法能以更合理、更全面、更灵活的方式分析处理随机优化问题,有效解决期望值模型、机会约束规划法和相关机会规划法之间的矛盾．最后通过算例表明了所提出方法的主要特点和有效性．     

Adaptive antennas at the mobile and base stations in an OFDM/TDMAsystem

Several smart antenna systems have been proposed and demonstrated at the base station (BS) of wireless communications systems, and these have shown that significant system performance improvement is possible. We consider the use of adaptive antennas at the BS and mobile stations (MS), operating jointly, in combination with orthogonal frequency-division multiplexing. The advantages of the proposed system includes reductions in average error probability and increases in capacity compared to conventional systems. Multiuser access, in space, time, and through subcarriers, is also possible and expressions for the exact joint optimal antenna weights at the BS and MS under cochannel interference conditions for fading channels are derived. To demonstrate the potential of our proposed system, analytical along with Monte Carlo simulation results are provided     

C+注入Si形成SiC/Si异质结构的椭偏光谱

用椭偏光谱法测量了(35keV,1.0×10118cm-2)和(65keV,1. 0×1018cm-2)C+注入Si形成的SiC/Si异质结构.应用多层介质膜模型和有效介质近似,分析了这些样品的SiC/Si异质结构的各层厚度及主要成份.研究结果表明:注35keV C+的样品在经1200 C、2h退火后形成的SiC/Si异质结构,其β-SiC埋层上存在一粗糙表面层,粗糙表面层主要由β-SiC、非晶Si和SiO2组成,而且β-SiC埋层与体硅界面不同于粗糙表面层与β-SiC埋层界面;注65keV C+的样品在经1250 C、10h退火后形成的SiC/Si异质结构,其表层Si是较完整的单晶Si,埋层B-SiC分成三层微结构,表层Si与β-SiC埋层界面和β-SiC埋层与体硅界面亦不相同.这些结果与X射线光电子谱(XPS)和横截面透射电子显微镜(TEM)的分析结果一致.     

Robust beamforming in cognitive radio

This letter considers the multi-antenna cognitive radio (CR) network, which has a single secondary user (SU) and coexists with a primary network of multiple users. Our objective is to maximize the service probability of the SU, subject to the interference constraints on the primary users (PUs) in the form of probability. Exploiting imperfect channel state information (CSI), with its error modeled by added Gaussian noise, we address the optimization for the beamforming weights at the secondary transmitter. In particular, this letter devises an iterative algorithm that can efficiently obtain the robust optimal beamforming solution. For the case with one PU, we show that a much simpler algorithm based on a closed-form solution for the antenna weights of a given power can be presented. Numerical results reveal that the optimal solution for the constructed problem provides an effective means to tradeoff the performance between the PUs and the SU, bridging the non-robust and worstcase based systems.     

Consideration of chiral optical fibres

Circular birefringence is a property of chiral materials. In this work, we consider the use of chiral materials in optical fibres to produce circularly birefringent optical fibres and in fibres where a contrast in circular birefringence contributes to forming the waveguide. (-)-menthyl methacrylate is also investigated as a possible material for the fabrication of such fibres.     

Generalized multiuser orthogonal space-division multiplexing

This paper addresses the problem of performing orthogonal space-division multiplexing (OSDM) for downlink, point-to-multipoint communications when multiple antennas are utilized at the base station (BS) and (optionally) all mobile stations (MS). Based on a closed-form antenna weight solution for single-user multiple-input multiple-output communications in the presence of other receiver points, we devise an iterative algorithm that finds the multiuser antenna weights for OSDM in downlink or broadcast channels. Upon convergence, each mobile user will receive only the desired activated spatial modes with no cochannel interference. Necessary and sufficient conditions for the existence of OSDM among the number of mobile users, the number of transmit antennas at the BS, and the number of receive antennas at the MS, are also derived. The assumption for the proposed method is that the BS knows the channels for all MS's and that the channel dynamics are quasi-stationary.     

基于DLL的RF CMOS振荡器中电荷泵电流源失配

研究了电荷泵中电流源失配造成的假频分量 ,推导出了一个用于计算假频分量的公式 .提供了两个数表用于直观了解参数改变时假频变化情况 .最后对设计基于 DL L的 RF CMOS振荡器提供了一些参考方法     

一种基于介质加载的地球覆盖波束天线设计

地球覆盖波束天线为低轨卫星与地面终端之间的数据传输建立了通道,文中研究了一种新型的介质 加载地球覆盖波束天线。基于介质加载的方法,文中提出了一种圆极化地球覆盖波束天线设计,该天线由馈电网 络、馈源和介质三部分组成,介质包括底部圆柱部分和顶部半球部分,馈源集成于介质内部。设计的地球覆盖波束 天线工作在C 波段,轴向0°~64°范围内增益在0 dBic 以上,40°方向增益为5. 2 dBic。天线尺寸紧凑,辐射波束具有 较好的空间截止特性,可满足立方星应用。     

SoC、DFM与EDA

介绍了系统级芯片(SoC)、可制造性设计(DFM)和电子设计自动化(EDA)的最新发展动态。SoC正在从单核向双核、四核和多核过渡。SoC设计必须采用DFM和EDA。采用DFM和EDA的优点:(1)提高芯片的生产效率和良率;(2)降低芯片生产成本;(3)缩短芯片生产周期,加速上市。