Defocusing image to pattern contact holes using attenuated phase shift masks

The patterning of contact holes by selecting out-of-focus image plane (defocus) using attenuated phase shift masks (APSM) has been studied. Defocus is found to enhance the image modulation at low partial coherence for contact holes with negative local average of mask function. Semi-dense holes up to 130 nm in 8% APSM have been printed by 0.5 μm defocus at a partial coherence of 0.31 using KrF scanner with highest numerical aperture of 0.68. However, these holes were closed with in-focus imaging. Defocus is also found to be beneficial for patterning the pitches that have extensive side lobes with in-focus imaging.     

Supermedia-enhanced Internet-based telerobotics

This paper introduces new planning and control methods for supermedia-enhanced real-time telerobotic operations via the Internet. Supermedia is the collection of video, audio, haptic information, temperature, and other sensory feedback. However, when the communication medium used, such as the Internet, introduces random communication time delay, several challenges and difficulties arise. Most importantly, random communication delay causes instability, loss of transparency, and desynchronization in real-time closed-loop telerobotic systems. Due to the complexity and diversity of such systems, the first challenge is to develop a general and efficient modeling and analysis tool. This paper proposes the use of Petri net modeling to capture the concurrency and complexity of Internet-based teleoperation. Combined with the event-based planning and control method, it also provides an efficient analysis and design tool to study the stability, transparency, and synchronization of such systems. In addition, the concepts of event transparency and event synchronization are introduced and analyzed. This modeling and control method has been applied to the design of several supermedia-enhanced Internet-based telerobotic systems, including the bilateral control of mobile robots and mobile manipulators. These systems have been experimentally implemented in three sites test bed consisting of robotic laboratories in the USA, Hong Kong, and Japan. The experimental results have verified the theoretical development and further demonstrated the stability, event transparency, and event synchronization of the systems.     

Ideal amplifier spacing for reduction of Gordon-Haus jitter indispersion-managed soliton communications

Based on a variational analysis, the authors demonstrate that the noise-induced Gordon-Haus timing jitter in a dispersion-managed soliton transmission system can be substantially reduced by appropriate placement of the amplifiers     

Measurements of single chain form factors by small-angle neutron scattering from polystyrene blends containing high concentrations of labelled molecules

A series of small angle neutron scattering measurements on blends of normal polystyrene (PSH) and labelled (deuterated) polystyrene (PSD) have been made with concentrations of PSD from 5 to 50 mol %. It is shown that the single chain form factor of the polymer in bulk can be obtained from a single concentration measurement for any concentration of labelled molecules, providing the molecular weights of the parent and labelled molecules are the same and the molecular weight distributions are narrow.     

Effect of Wall Surface Properties at Different Drying Kinetics on the Deposition Problem in Spray Drying

Current methods in alleviating the wall deposition problem in spray drying emphasize mainly controlling the stickiness of the drying particles and less attention is placed on the properties of the dryer wall. In this experimental study, the effect of wall surface properties on the deposition mechanism has been investigated. Properties considered in classifying different wall materials were surface energy, roughness, and dielectric properties. The model solution contained sucrose, representing low-molecular-weight sugars commonly encountered in spray drying of fruit and vegetable juices. The effect of wall properties on deposition was explored at different drying rates producing particles of different surface rigidity. Larger surface roughness produced higher deposition fluxes for particles with high impact velocity and moisture. Surface energy and surface roughness were found to have no significant effect for dry rigid particles at the middle and bottom elevation of the drying chamber. However, material with lower surface energy (Teflon) exhibited less deposition for rubbery particles at such elevations. Analysis shows that dielectric wall material (Teflon) tends to enhance deposition of dry particles because of attrition at the surface. Higher wall temperature was found to produce slightly more deposition. The results of this work give a general indication of the effect of wall material on the deposition problem and provide the fundamental understanding for further studies along this line. Proper selection of dryer wall material will provide potential alternatives for reducing the deposition problem.     

A stochastic realization algorithm via block LQ decomposition in Hilbert space

A stochastic realization problem of a stationary stochastic process is re-visited, and a new stochastically balanced realization algorithm is derived in a Hilbert space generated by second-order stationary processes. The present algorithm computes a stochastically balanced realization by means of the singular value decomposition of a weighted block Hankel matrix derived by a “block LQ decomposition”. Extension to a stochastic subspace identification method explains how the proposed abstract algorithm is implemented in system identification.     

Pedestrian detection and tracking at crossroads

This paper presents a system that can perform pedestrian detection and tracking using vision-based techniques. A very important issue in the field of intelligent transportation system is to prevent pedestrians from being hit by vehicles. Recently, a great number of vision-based techniques have been proposed for this purpose. In this paper, we propose a vision-based method, which combines the use of a pedestrian model as well as the walking rhythm of pedestrians to detect and track walking pedestrians. Through integrating some spatial and temporal information grabbed by a vision system, we are able to develop a reliable system that can be used to prevent traffic accidents happened at crossroads. In addition, the proposed system can deal with the occlusion problem. Experimental results obtained by executing some real world cases have demonstrated that the proposed system is indeed superb.     

An immune oriented multi-agent system for biological image processing

In this article, we present a parallel image processing system based on the concept of reactive agents. Our system lies in the oRis language, which allows to describe finely and simply the agents’ behaviors to detect image features. We also present a method of segmentation using a multi-agent system, and two biological applications made with oRis. The stopping of this multi-agent system is implemented through a technique issued from immunology: the apoptosis.