Indoor solid fuel use for heating and cooking with blood pressure and hypertension: A cross-sectional study among middle-aged and older adults in China

A cross-sectional study was conducted to investigate the impact of solid fuel use for heating and cooking on blood pressure (BP) and hypertension, using data from the China Health and Retirement Longitudinal Study (CHARLS). The primary fuels used for indoor heating and cooking were collected by questionnaires, respectively. Hypertension was defined based on self-report of physician's diagnosis, and/or measured BP, and/or anti-hypertensive medication use. Multivariate logistic regression models were constructed to assess the associations. Among 10 450 eligible participants, 68.2% and 57.2% used indoor solid fuel for heating and cooking, respectively. Compared with none/clean fuel users, solid fuel for heating was associated with elevated BP (adjusted β: 2.02, 95% CI: 1.04–3.01 for systolic BP; adjusted β: 1.36, 95% CI: 0.78–1.94 for diastolic BP) and increased risk of hypertension (adjusted odds ratio: 1.15, 95% CI: 1.03–1.29). The impact of indoor solid fuel for heating on BP was more evident in rural and north residents, and hypertensive patients. We did not detect any significant associations between solid fuel use for cooking and BP/hypertension. Indoor solid fuel use is prevalent in China, especially in the rural areas. Its negative impact on BP suggested that modernization of household fuel use may help to reduce the burden of hypertension in China.     

基于MATLAB的风能自校正自调整PID模糊控制器仿真研究

为了提高风力发电系统综合系统性能,在传统风力发电技术的基础上,对变速风力发电机组的自校正自调整PID模糊控制进行了详细的分析和研究,从而利用模糊控制和PID控制相结合的技术,取得了很好的效果。从MATLAB仿真结果看出系统精度及效率很高而稳态误差较小,鲁棒性较好。     

A Distributed State Estimator Utilizing Synchronized Phasor Measurements

With the creation of balancing authorities by the North American Reliability Council that span large portions of the North American interconnection, and stringent requirements for real time monitoring of power system evolution, faster and more accurate state estimation algorithms that can efficiently handle systems of very large sizes are needed in the present environment. This paper presents a distributed state estimation algorithm suitable for large-scale power systems. Synchronized phasor measurements are applied to aggregate the voltage phase angles of each decomposed subsystem in the distributed state estimation solution. The aggregated state estimation solution is obtained from the distributed solution using a sensitivity analysis based update at chosen boundary buses. Placement of synchronized phasor measurements in the decomposed subsystems is also investigated in this paper. Test results on the IEEE 118-bus test bed are provided     

Evaluation of Morphology—Stable Critical Size of KNbO3 Crystals

Skeletal form of KnbO3 crystals growing in Li2B4O7 solvent was in-situ observed at 900℃ and it was found that shallow depression started to develop on the surface of KnbO3 crystals when the crystal size exceeded several micron,typically 7 micron.Based on the quantitative criterion derived by Chernov,the estimated critical size of KNbO3 crystals was 1 micron,which was consistent with the experimental measurement.The kinetic coefficients,Kcorner and Kcr,in the criterion were experimentally obtained in the diffusive-convective and diffusive-advective flow states respectively.     

对氧化物熔体浮区中重力对流的数值模拟

利用有限元分析方法数值模拟了界面形状对氧化物高温熔体碟形浮区中的温度分布和重力对流速率的影响，发现界面形状对重力对流速率有较大的影响，对于凸面，相对于炉圈平面5％的偏离使重力对流速率增大25％，偏离越大，重力对流速度越大，对于凹面，5％的偏离使重力对流速率减小15．7％，偏离越大，重力对流速度越小。     

P偏振光双表面反射比的角谱及其应用

p-偏振光在镀膜平板基片两面的反射光强度比值的角谱是膜层参数(折射率、消光系数和厚度)的函数.实验表明通过角谱的测量和数值模拟是精确测量薄膜参数的新途径.基于此原理,还试制出掺Sb的SnO2溶胶凝胶薄膜的光化学气敏传感器.     

Concepts,processing, and recent developments in encapsulating essential oils

By the virtue of their olfactory, physicochemical, and biological characteristics, essential oils (EOs) have drawn wide attention as additives in daily chemicals like perfume or personal care products. Nevertheless, they are physicochemically unstable and susceptible to degradation or loss. Microencapsulation offers a feasible strategy to stabilize and prolong release of EO. This review summarizes the recognized benefits and functional properties of various preparation and characterization methods, wherein innovative fabrication strategies and their formation mechanisms are especially emphasized. Progress in combining detecting/measuring technologies with kinetic modelling are discussed, to give an integral approach of controlling the dynamic release of encapsulated EOs. Moreover, new development trends of EOs capsules are also highlighted.     

医药副产含磷废盐的提纯研究

随着精细化工及中间体产品的发展,各类副产废盐量不断增加,由于其产生量大及难处理等特点,成为阻碍行业发展的一大瓶颈。主要开展了医药副产含磷废盐的提纯实验研究,针对废盐产生的途径和特性,采用洗脱剂（甲醇-乙醇）+活性炭混合洗脱与重结晶的方式,分别去除废盐中的有机物和氯化钠,回收可利用的磷酸盐,实现废盐的提纯资源化。当洗脱剂与废盐的体积质量比为1 mL/g、洗脱剂甲醇与乙醇的体积比为4∶6、活性炭用量为废盐质量的0.4%时,废盐中的有机物得到了有效去除。随后对得到的混盐进行重结晶得到回收磷酸盐,回收磷酸盐的纯度可达98%以上,符合工业磷酸盐行业标准的要求。将含磷废盐提纯回收磷酸盐,1 t废盐的处理成本约为174.24元,可回收0.61 t磷酸盐,实现了废盐的资源化再利用。     

电沉积制备多元非晶合金形成规律研究

利用二维Miedema坐标参数(Δφ~*和Δn_(ws)~((-1)/3))及加入尺寸因素ΔR/R_A构成的三维化学坐标揭示了水溶液法制备多元合金的非晶形成规律。对109个合金分析表明,在二维和三维坐标中,可分别由一直线和一平面较好的将非晶形成和非形成区区分;非晶化条件为:二维坐标系中,二元系,|Δφ~*|>6.4|Δn_(ws)~((-1)/3)|+0.05;多元系,|Δφ~*|>6.6|Δn_(ws)~((-1)/3)|+0.05。判据的准确率在二元、二元和三元以及二元、三元和四元合金系中分别为:81.9％,82.9％及83.5％;三维坐标系中,二元系,|ΔR/R_A|/0.6+|Δφ~*|/0.12-|Δn_(ws)~((-1)/3)|/0.02=1,多元系,|ΔR/R_A|/0.03+|Δφ~*|/0.1-|Δn_(ws)~((-1)/3)|/0.01=1。在二元及二元和三元系统中,区分的准确率高于82％以及86％;该判据扩展至四元合金系后,准确率仍高于86％。