On the determination of boundaries to manipulator workspaces

The accumulation of two independent, broadly applicable formulations for determining the boundary to manipulator workspaces, presented elsewhere, are compared in this paper. Insights gained from one method are used to explain behavior exhibited in the other. Results are also compared and validated. A numerical formulation based on continuation methods is used to map curves that are on the boundary of a manipulator workspace. Analytical criteria based on row rank deficiency criteria of the manipulator's analytical Jacobian are used to map a family of one-dimensional solution curves on the boundary. The other formulation, based on a similar rank-deficiency criteria, yields analytic boundaries parametrized in terms of surface patches on the boundary. Results concerning the applicability of the numerical method to open- and closed-loop systems are compared with those limited to the open-loop for the analytical method. Conclusions regarding the behavior of the manipulator on geometric entities characterized by singular curves, higher-order bifurcation points, and surfaces inside the workspace are drawn. Applicability of both methods and their limitations are also addressed.     

Top-down logic design with pass-transistor cells and efficientsynthesiser

A pass-transistor based cell library containing only two types of cells is designed and a corresponding logic/circuit synthesiser developed for logic mapping of any combinational circuit. The proposed design has better performance than the recently proposed lean integration with pass transistors (LEAP) cell library. Furthermore, the modified LEAP cell library can be easily migrated to a new process technology due to the smaller number of cells     

Novel technique for SiO2 formed by liquid-phasedeposition for low-temperature processed polysilicon TFT

A technique for SiO₂ formation by liquid-phase deposition (LPD) at nearly room temperature for low-temperature processed (LTP) polysilicon thin-film transistor (poly-Si TFT) was developed. LPD SiO₂ film with a lower P-etch rate shows a dense structure. LPD SiO₂ also exhibits good electrical characteristics. LTP poly-Si thin-film transistors (TFTs) with LPD SiO ₂ as the gate insulator have been fabricated and investigated. Their characteristics indicate performance adequate for their use as pixel transistors in liquid crystal displays (LCDs)     

Applying real options in investment decisions relating to environmental pollution

This study focuses on how to assess the optimal environmental investment decisions under economic and ecological uncertainty, and establishes the continuous time model using the real option approach to optimize environmental pollution policy. Unlike traditional cost benefit analysis, this work extends the model of [Pindyck, R.S., 2002. Optimal timing problems in environmental economics. Journal of Economic Dynamics and Control 26(9–10), 1677–1697], and attempts to identify the storage threshold of pollution stocks and the optimal timing for implementing environmental pollution decisions.     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Effects of Inclined Angle and Plate Spacing on the Degree of Separation in Batch-Type Flat-Plate Thermal Diffusion Columns

Effects of inclined angle and plate spacing on the degree of separation in batch-type flat-plate thermal diffusion columns, with operating expense and fixed charge kept unchanged, are discussed. It was found that the degree ofseparation increases when the inclined angle increases or when the platespacing decreases. However, decreasing the plate spacing will lead to decreasingthe amount of solution to be treated in the column, while increasing the inclined angle will enlarge the operating time for reaching the steady state.     

Serologic and molecular detection of granulocytic ehrlichiosis in Rhode Island

A new indirect fluorescent-antibody (IFA) assay with antigen produced in vitro in the human promyelocytic leukemia cell line HL60 was used to identify the first recognized case of human granulocytic ehrlichiosis in Rhode Island. This IFA assay was used to detect granulocytic ehrlichiae in white-footed mice and in a dog inhabiting the area surrounding the patient's residence. Host-seeking Ixodes scapularis ticks found in the same habitat also were infected. I. scapularis ticks collected from other locations were fed on dogs and New Zealand White rabbits to assess the competency of these species as hosts of granulocytotropic Ehrlichia. Tick-induced infections of dogs were confirmed by serologic testing, tissue culture isolation, and PCR amplification, whereas several rabbits seroconverted but were PCR and culture negative. PCR amplification of the 16S rRNA gene and DNA sequencing of the PCR products or culture isolation was used to confirm granulocytic Ehrlichia infections in humans, dogs, white-footed mice, and ticks.     

On the coherent interference suppression using a spatiallysmoothing adaptive array

The behavior of a spatially smoothing adaptive array is examined. An expression for the weight vector is first derived. Using the array gain on the desired signal and the coherent interference is obtained. Then the expression for output signal-to-noise (SNR) is derived. It shows that the performance of the spatially smoothing array depends on the number of the subarrays, the angle separation, relative power and initial phase difference between the desired signal and the coherent interference. For good interference suppression it is found that the magnitude of the phase difference of the incident and interference signals must be greater than the beamwidths of both the subarray and the equivalent array. There is also a tradeoff between increasing the groups of subarrays and decreasing the number of elements in the subarrays. Computer simulation results are given that validate the analysis     

Local heat transfer measurements of plate finned-tube heat exchangers by infrared thermography

An experimental study is performed using an infrared thermovision to monitor temperature distribution over a plate-fin surface inside the plate finned-tube heat exchangers. The differentiation of the temperature function is derived to determine the local convective heat transfer coefficients on the tested fin, using a local element lumped conduction equation included the convective effect on the boundaries with experimental data. It is disclosed that the infrared thermography is capable of rapidly detecting location and extent of transition and separation regions of the boundary layer over the whole surface of the tested models. Through the comparison of the test results on the strategy region of the in-line and staggered arrangements, it is more easy to understand or interpret the detailed dynamic phenomena of flow existed in the heat exchangers. In addition, the experimental results demonstrate that the averaged heat transfer coefficient of staggered configuration is 14-32% higher than that of in-lined configuration     

催化裂化烟气转硫脱氮和助燃三功能催化剂FP-DSN的工业应用

烟气转硫、脱氮和助燃三功能新型催化剂FP DSN在中国石油天然气股份有限公司锦西石化分公司 1.4Mt/a重油催化裂化装置的工业应用表明 ,此种以La ,Ce ,Sr和Co等元素的氧化物或复合物为活性组分的催化剂 ,在其用量为催化裂化催化剂总藏量的 1%～ 2 %的情况下 ,有较强的脱除烟气中SOx 和NOx 的能力 ,大大减轻了烟气对反应器壁的腐蚀 ,减少了污染气体的排放 ,同时有CO助燃效果 ,装置可不使用其他专门的助燃剂。应用试验时 ,再生器烟气中SOx 的平均脱除率达 72 .85 %,NOx 的平均脱除率达 85 .90 %。该催化剂的使用对催化裂化产品的分布和质量无明显影响。该剂的应用为装置带来了可观的经济效益。