Initial Stages in the Metal-dusting Process on Alloy 800

The initial stages of the metal-dusting process on Alloy 800 at 620 °C were investigated by light optical microscopy, RAMAN spectroscopy, atomic-force microscopy, Auger electron spectroscopy, transmission-electron microscopy and electron back-scatter diffraction. As it turned out the incubation period for metal-dusting is characterized by simultaneous formation of a heterogeneously growing oxide scale and deposition of carbon. The material surface shows different tarnish colors depending on the substrate-grain orientation with different susceptibility to the beginning of metal-dusting attack. “Low-index” grains were not attacked within the times investigated while the other grain orientations showed pitting. Carbon is evidently incorporated into the oxide scale from the very beginning of exposure with different intensities depending on the underlying substrate-grain orientation leading to differences in the tarnish colors. As a consequence carbides are formed even underneath “dense” oxide layers. Evidently metal-dusting attack starts at positions of the oxide scale where “higher carbon concentrations” are present.     

rab3 mediates cortical granule exocytosis in the sea urchin egg

Egg activation at fertilization in the sea urchin results in the exocytosis of approximately 15,000 cortical granules that are docked at the plasma membrane. Previously, we reported that several integral membrane proteins modeled in the SNARE hypothesis, synaptotagmin, VAMP, and syntaxin, in addition to a small GTPase of the ras superfamily, rab3, were present on cortical granules (Conner, S., Leaf, D., and Wessel, G., Mol. Reprod. Dev. 48, 1-13, 1997). Here we report that rab3 is associated with cortical granules throughout oogenesis, during cortical granule translocation, and while docked at the egg plasma membrane. Following cortical granule exocytosis, however, rab3 reassociates with a different population of vesicles, at least some of which are of endocytic origin. Because of its selective association with cortical granules in eggs and oocytes, we hypothesize that rab3 functions in cortical granule exocytosis. To test this hypothesis, we used a strategy of interfering with rab3 function by peptide competition with its effector domain, a conserved region within specific rab types. We first identified the effector domain sequence in Lytechinus variegatus eggs and find the sequence 94% identical to the effector domain of rab3 in Stronglocentrotus purpuratus. Then, with synthetic peptides to different regions of the rab3 protein, we find that cortical granule exocytosis is inhibited in eggs injected with effector domain peptides, but not with peptides from the hypervariable region or with a scrambled effector peptide. Additionally, effector-peptide-injected eggs injected with IP3 are blocked in their ability to exocytose cortical granules, suggesting that the inhibition is directly on the membrane fusion event and not the result of interference with the signal transduction mechanism leading to calcium release. We interpret these results to mean that rab3 functions in the regulation of cortical granule exocytosis following vesicle docking.     

Dermatoglyphic peculiarities in patients with Williams-Beuren syndrome

The dermatoglyphic patterns of fingertips and palms of 115 patients with Williams-Beuren syndrome (WBS) were analysed and compared with the data from 199 control individuals from Germany. The following combination of dermatoglyphic patterns appears to be characteristic to WBS: an excess of whorls on all fingertips; high termination values of the main lines D, B, and A; frequent absence of C triradius (C0); high frequencies of ulnar loops on the hypothenar and distal loops on the 2nd, 3rd, and 4th interdigital areas, of distal axial triradii t", and of abnormal palmar creases such as simian crease and Sydney lines. The combination of fingertip and palmar patterns expressed by a "Log.Score-Index," provides a high degree of discrimination between the WBS patients (92%) and the control group (88%). A "phantom picture" for WBS was constructed, which can be used for its diagnosis.     

Exploring place attachment and visions of nature of water-based recreationists: the case of the longitudinal dams

This study concerns an innovative project in the Dutch river Waal: the construction of longitudinal dams. By splitting the river into a main and secondary channel, these dams significantly impact the river landscape and the way it is used by different stakeholders. We report the results of a baseline study of the expectations local water-based recreationists (fishermen and boaters) had of the longitudinal dams before they were constructed. In addition, we explore their levels of place attachment, and use the visions of nature approach to elicit their lay philosophy of nature. We found that fishermen were more strongly attached to the area than boaters. Though expectations of the dams were generally negative, this differed significantly between fishermen and boaters, and between different dimensions of landscape change. We demonstrate the relevance of place attachment and visions of nature for understanding how recreationists perceive landscape change.     

Magnetron-sputtered cobalt-based protective coatings on ferritic steels for solid oxide fuel cell interconnect applications

Co, Co–Mn (67:33 at.%) and Co–Cu (67:33 at.%) coatings were fabricated using magnetron sputtering on two kinds of ferritic stainless steels (Crofer22APU and F17TNb) in order to form spinel protective coatings on metallic interconnects for solid oxide fuel cells. Despite the thickness unevenness at different regions, dense metallic coatings were successfully applied onto all necessary surfaces of the channelled interconnect substrates. Upon oxidation, spinel oxide coatings with very low Cr content were formed, reducing effectively the Cr release. Among the three protective coatings, Co–Cu coating showed the lowest area specific resistance (<15 mΩ cm² at 800 °C).     

Temperature and gas composition dependence of internal oxidation kinetics of an Fe?10%Cr alloy in water vapour containing environments

Recently it was proposed, that the hampered formation of external protective chromia scales on FeCr‐alloys in water vapour containing, low‐pO₂ gases is correlated with enhanced internal oxidation of chromium. In the present study the internal oxidation kinetics of Fe? 10Cr (in mass%) during isothermal oxidation in Ar? H₂? H₂O mixtures at temperatures in the range 800–1050 °C has been investigated. It was found that the tendency for Cr to become internally oxidized decreased with decreasing temperature. At the higher test temperatures the internal oxide precipitates consisted of Fe/Cr‐spinel. With decreasing temperature the precipitates near the oxidation front gradually exhibited increasing amounts of chromia. At 900 °C the oxidation morphology in the Ar? H₂ base gas mixture changed from exclusive internal oxidation of Cr at a water vapour content of 2% towards a combined internal Cr oxidation and external Fe‐oxide formation at higher water vapour partial pressures.     

Single-atom detection by SONRES

The new method of atomic fluorescence detection, called saturated optical nonresonant emission spectroscopy (SONRES), has been modeled for a three-level atom, and experiments on sodium have been conducted that support the model. A rate equation analysis yielded expressions for excited-state atomic populations and saturation intensity. The detection of sodium in buffer gases that promote collisional transfer of excitation between 3²P1/2→ 3²p3/2both without quenching the fluorescence emission and with quenching was considered. Experimental results are presented for sodium in argon. At -25°C, approximately 180 atoms/cm³were monitored with a S/N of ∼ 15 representing detection at the level of one part in 10¹⁷. The signal at this temperature was generated by less than a single atom in the laser beam.     

Effect of manufacturing related parameters on oxidation properties of MCrAlY‐bondcoats

The effect of MCrAlY‐bondcoat manufacturing parameters prior to TBC deposition on the bondcoat oxidation behavior and TBC lifetime was studied. The studied material was a NiCoCrAl(Y/Hf) free‐standing coating. It was found that variation of oxygen partial pressure during vacuum plasma spraying and the vacuum heat treatment procedure significantly affects the yttrium and hafnium distribution in the coating. In coatings sprayed at high pO₂, yttrium and hafnium were mainly tied up into oxide precipitates. This effect is apparently responsible for an early alumina scale spallation and failure of the initially studied TBC system during cyclic oxidation. In contrast, the coating sprayed at low pO₂ revealed an overdoping effect, i.e. extensive yttrium and hafnium incorporation into the scale resulting in an accelerated scale growth rate and internal oxidation. It was shown that by variation of the vacuum heat treatment parameters the yttrium and hafnium distribution in the near‐surface regions of the low oxygen coating can be modified. The latter result demonstrates the potential of minimizing the negative overdoping effect on the scale growth in the thermal‐sprayed MCrAlY coatings with low oxygen and/or high reactive element contents by optimization of the vacuum heat treatment procedure.