木犀科植物花粉的扫描电镜研究

植物花粉的形态特征具有种属特异性。本文用扫描电子显微镜观察了木犀科(Oleaceae)的六属八种植物花粉的形态特征。结果表明,除迎春有个别四萌发沟外,其它花粉都是三沟型,外壁纹饰均为网状。但各种植物花粉的细微形态仍有明显差异。因此,用扫描电镜观察研究植物花粉的亚微形态特征,可为植物分类提供一些必要的形态依据。     

Chromatographic characterisation of aptamer-modified poly(EDMA-co-GMA) monolithic disk format for protein binding and separation

The introduction of aptameric ligands onto disk-monolithic adsorbent, representing a unique strategy for convective isolation of target molecules with high specificity and selectivity, is investigated for the first time. Experimental results showed that the disk monolith possessed a good permeability of 1.67 ± 0.05 × 10^–14 m² (RSD = 3.2%). The aptameric ligand density for the aptamer-modified disk monolith was 480 pmol/uL. Chromatographic analysis of the aptamer disk-monolith efficiency showed an optimum linear velocity of 126 cm/min (≈0.25 mL/min) at room temperatures 25 ± 2°C. The theoretical number of plates corresponding to the optimum linear velocity was 128.2 with an height equivalent to the theoretical plate of 0.022 mm. The disk aptamer-immobilised monolithic system demonstrated good selectivity and isolation of thrombin from non-targets.     

Synthesis of Novel Phosphonic‐Type Activity‐Based Probes for Neutrophil Serine Proteases and Their Application in Spleen Lysates of Different Organisms

Neutrophils are a type of granulocyte important in the “first line of defense” of the innate immune system. Upon activation, they facilitate the destruction of invading microorganisms by the production of superoxide radicals, as well as the release of the enzymatic contents of their lysozymes. These enzymes include specific serine proteases: cathepsin G, neutrophil elastase, proteinase 3, as well as the recently discovered neutrophil serine protease 4 (NSP4). Under normal conditions, the proteolytic activity of neutrophil proteases is tightly regulated by endogenous serpins; however, this mechanism can be subverted during tissue stress, thereby resulting in the uncontrolled activity of serine proteases, which induce chronic inflammation and subsequent pathology. Herein, we describe the development of low‐molecular‐weight activity‐based probes that specifically target the active sites of neutrophil proteases.     

Tensile deformation mechanisms of polypropylene/elastomer blends reinforced with short glass fiber

Polypropylene hybrid composites reinforced with short glass fiber (SGF) and toughened with styrene–ethylene butylenes–styrene (SEBS) elastomer were prepared using extrusion and injection‐molding techniques. Moreover, hybrids compatibilized with SEBS‐grafted maleic anhydride (SEBS‐g‐MA) and hybrid compatibilized with PP grafted with maleic anhydride (PP‐g‐MA) were also fabricated. The matrix of the latter hybrid was designated as mPP and consisted of 95% PP and 5% PP‐g‐MA. Tensile dilatometry was carried out to characterize the fracture mechanisms of hybrid composites. Dilatometric responses showed that the elastic deformation was the dominant deformation mechanism for the SGF/SEBS/PP and SGF/SEBS‐g‐MA/PP hybrids. However, cavitation deformation prevailed over shearing deformation for both hybrids at the higher strain regime. The cavitation strain resulted from the debonding of glass fibers and from the crazing of the matrix in the SGF/SEBS/PP hybrid. In contrast, the cavitation was caused by the debonding of SEBS particles from the matrix of the SGF/SEBS‐g‐MA/PP hybrid. The use of PP‐g‐MA resulting in elastic deformation was the main mode of deformation in the low‐strain region for the SGF/SEBS/mPP and SEBS/SEBS‐g‐MA/mPP hybrids; thereafter, shearing appeared to dominate at the higher strain regime. This was attributed to the MA functional group improving the bonding between the SGF and PP. The correlation between fracture morphology and dilatometric responses also is presented in the article. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 441–451, 2003     

曲面形貌轮廓仪传感器的机构设计

介绍一种适于曲面形貌测量的新型触针式轮廓仪的传感机构。它采用顶尖支承作为测杆的支承形式，并以测杆自重为传感器的测力源，无导头。本文分析了其动态特性和动态测力问题。     

A microstructural characterization of scale formed on austenitic Fe–29.7Mn–8.7Al–1.04C and duplex Fe–29Mn–10Al–0.4C alloys in oxidizing-sulfidizing environments

Austenitic Fe–29.7Mn–8.7Al–1.04C and duplex Fe–29Mn–10Al–0.4C alloys were exposed to the SO₂–O₂ mixed gas environments at 900 °C. The morphology of the scales formed on these alloys under oxidizing-sulfidizing conditions were examined by SEM and X-ray mapping techniques. The results showed that the addition of carbon up to 1 wt.% to the Fe–29.7Mn–8.7Al–1.04C alloy led to the formation of internal sulfidation and intergranular oxidation in the mixed oxidant gas environments. On the other hand, no evidence of intergranular oxidation could be detected in the duplex Fe–29Mn–10Al–0.4C alloy with lower carbon concentration.     

Microstructural hot corrosion behaviour of austenitic Fe-29.7Mn-8.7Al-1.04C alloy in fused Na2SO4 and Na2SO4-NaCl mixture

A short-time hot corrosion test was performed on the austenitic Fe-29.7Mn-8.7Al-1.04C alloy in sodium sulphate at 900°C. The corrosion scales formed on the alloy investigated were studied by scanning electron microscopy and X-ray mapping techniques. The hot-corrosion scales morphology of the austenitic Fe-29.7Mn-8.7Al-1.04C alloy were characterized by the formation of Al₂S₃ and α-MnS sulphides at and beneath the internal alumina scale. No fluxing of the scales was observed. The effect of the addition of sodium chloride to the fused sodium sulphate on the hot corrosion scales morphology was also investigated.