Impact of Aspen Log Storage with and without Protection on OSB Performance

Outdoor log storage without protection can change the mechanical and chemical properties of wood due to infection by various fungi. To understand how outdoor log storage affects the wood and, subsequently, the strandboard quality, two piles of aspen logs were set up outside and stored for a period of four months (July to November). One of the piles was treated with a biological solution to prevent fungal growth. The other one was stored without treatment. Both piles contained non-debarked and partially debarked logs. Evaluation of sap stain development indicated that all logs had been colonized by staining fungi with average stain coverage of 9.37 to 57.18% and maximum stain penetration of 3.58 to 7.27 cm over the log cross section. The variation of fungal colonization depended on log treatment and bark condition. The most effective way to prevent stain growth was the combination of biological treatment and partial debarking. A series of strandboard was prepared from fresh and aged aspen logs. All boards made from stored logs were statistically comparable to or superior to the control boards made from fresh aspen logs. The boards made from treated/partially debarked and untreated/non-debarked logs were statistically comparable to each other except for wet MOR. In addition, these two board types were statistically stronger than other boards made from treated/non-debarked and untreated/partially debarked logs in terms of IB and water resistance. Some individual stained strands were observed on the finished board surface. Less staining was found in the boards prepared from biologically treated and partially debarked logs, compared with those made from other stored logs.     

LiPF6基电解液应用于下一代二次电池的研究进展

LiPF6是当前商品锂离子电池电解液采用的主盐,具备技术、成本和市场规模等优势,但随着下一代二次电池对比能量、寿命、安全性等性能的更高需求,LiPF6热稳定性差、在固态电解质相界面膜的成膜过程中参与度低、与新型正负极材料匹配性不佳等缺点日益凸显,人们对其在未来电池产业中的发展提出质疑.本文基于对LiPF6基础物理化学性...     

基于Fe金属-有机骨架的磁性多孔碳材料的制备 及其萃取水中孔雀石绿的应用研究

目的制备一种新型磁性多孔碳材料一γ-Fe_2O_3/C,并建立一种简单可靠的富集水中孔雀石绿的方法。方法先利用水热法合成MOF-MIL-53(Fe),再以其为模板通过微波辅助高温离子热法合成γ-Fe_2O_3/C,利用XRD、FT-IR、SEM、TEM等手段对γ-Fe_2O_3/C进行表征,并将其作为MSPE吸附剂富集环境水样中的孔雀石绿,同时对吸附剂用量、洗脱剂种类、萃取时间以及洗脱次数等影响磁固相萃取效率的因素进行优化。结果孔雀石绿在50~5000μg/L的浓度范围内线性关系良好,相关系数大于0.9995,方法检出限为11.07μg/L,添加低、中、高3个浓度水平下的回收率范围为84.0%~102.0%,相对标准偏差小于5%(n=5)。结论本研究制备的纳米材料可适用于日常环境水样中的孔雀石绿的检测。     

A First-Principles Calculation of Electronic Structure and dHvA Simulation of the Novel Superconductor Re<Subscript>6</Subscript>Hf

In this paper, we performed a density functional theory calculation study on the newly discovered superconductor Re₆Hf containing anti-symmetric spin-orbit coupling (ASOC) properties. The calculated densities of electronic states demonstrate that the d–d interaction of Re₆Hf is much stronger than that in Re₆Zr. A fully relativistic DFT study shows a special performance of densities of states for the spin-up and spin-down electrons. Band structure calculations indicate that the lifting at several high symmetric k points and plenty of splits in band structures yield significant topological transitions in the Fermi surfaces of Re₆Hf. The energy splitting of bands caused by ASOC are estimated to be 34 and 44 meV, respectively. The de Hass-van Alphen effect simulation is demonstrated and analyzed.     

Force spectroscopy on single polymer incorporated into polymer gels

We conducted the extraction experiments of single polymer incorporated into hydrogels with an atomic force microscope (AFM) as a model for investigating nonspecific intermolecular interactions between macromolecules in a semidilute region at the single molecule level. Small amount of poly(ethylene glycol) (PEG) terminated with a thiol group was inserted in poly(acrylamide) gels, and a part of PEG polymer segments on the gel surface was attempted to pull out of the gels with a gold-coated AFM tip. The observed force-distance curves were classified into two kinds of extraction force profiles: a plateau force, which is almost constant irrespective of the tip-surface distance and a nonlinear force, which nonlinearly increases with the extraction length. Characteristic interaction length, L, and force, F, of these extraction force profiles were measured with changing the crosslinker concentration of gels which strongly affects the network structures. As a result, L of these extraction profiles significantly decreased at crosslinker concentrations higher than a standard one at which most gels have been prepared for investigating their physical properties. On the other hand, F showed no obvious difference on the change in crosslinker concentrations both on the plateau and the nonlinear force profiles. The origin of the observed forces was discussed in terms of gel network structures.     

电感耦合等离子发射光谱测定乳扇中的铝含量

目的 建立电感耦合等离子发射光谱法测定乳扇中铝含量的分析方法。调查市售样品中铝的含量是否异常。方法 采用湿式消解法处理乳扇样品, 电感耦合等离子发射光谱测定样品中铝的含量, 同时进行精密度实验和加标回收实验。测定市场收集的乳扇样品中铝的含量, 并与严格按云南省地方标准(DBS 53/010-2016)制作的乳扇样品进行比较。结果 铝在0~10 mg/L范围内线性关系良好, 相关系数r达0.999928, 方法的检出限为0.5 mg/kg, 定量限为1.5 mg/kg, 精密度为2.5%~3.1%, 加标回收率在96.6%~105.0%之间。按地方标准制作的乳扇样品中铝含量较低, 在3.2~5.3 mg/kg之间, 部分市场收集的样品中铝含量偏高。结论 本方法操作简便、结果准确, 可作为乳扇中铝含量检测的方法。乳扇应严格按照地方标准制作。     

绿原酸在肝微粒体和肠道菌群中的体外代谢研究

摘 要：目的 研究绿原酸在大鼠肝微粒体和肠道菌群中的代谢产物及代谢途径。方法 运用大鼠肝微粒体体外温孵法和大鼠离体粪便温孵法,采用超高效液相色谱串联四极杆飞行时间质谱(UPLC-Q-TOF/MS),色谱柱为Waters ACQUITY UPLC BEH C18 (1.7 μm, 2.1 mm×100 mm),流动相为乙腈和0.1%甲酸水溶液梯度洗脱系统,流速为0.35 mL/min,离子源为电喷雾离子源(ESI),以负离子模式进行检测。采用Masslynx软件通过保留时间与一、二级质谱信息,进行成分分析。结果 大鼠肝微粒体温孵样品中有绿原酸原型成分和奎宁酸、咖啡酸2个代谢产物;粪便温孵样品中有绿原酸原型成分和奎宁酸、3-羟基苯丙酸、二氢咖啡酸、二氢阿魏酸、咖啡酸、O-甲基绿原酸6种代谢产物。结论 UPLC-Q-TOF/MS技术鉴定绿原酸及其代谢产物,操作便捷高效,结果准确全面,绿原酸在体外代谢的主要途径为氢化、甲基化、水解、去羟基化等。     

Earing behavior and crystallographic texture of aluminum alloys during cold rolling

Earing behavior and crystallographic texture during cold rolling have been investigated for two commercial can body aluminum alloys. It is found that earing behavior can be inferred from texture information. The recrystallization texture causes 90° earing, while the deformation texture results in 45° earing. A strong recrystallization texture (or a high 90° earing) of a hot band causes a later appearance of lower 45° earing in the final gauge sheet and thus is desirable for industry. The earing behavior is better indicated by the delta function, which is characterized as the intensity difference between the deformation texture and the softening texture. The results indicate that the earing behavior during cold rolling can be quantitatively monitored by the crystallographic texture. In addition, effects of the texture inhomogeneity through-thickness have also been investigated and discussed.     

Systematic adsorption process of petroleum hydrocarbon by immobilised petroleum-degradation bacteria system in degradation pathways

In order to effectively control petroleum hydrocarbon pollution by immobilisation technology,it is necessary to understanding the degradation pathways of petrol...     

Magnetic Domain Evolution in Sintered Nd–Fe–B Magnet during Magnetization Process

In the present study, the magnetic domains and their evolution during magnetization process have been investigated for sintered Nd–Fe–B permanent magnets with Kerr microscopy. Observation of the magnetic domain evolution process during magnetization process shows that some domain walls were pinned at the grain boundary area under magnetic field up to 5 kOe. It is suggested that magnetic interaction between individual Nd₂Fe₁₄B grains contacting to each other leads to appearance of small closed domains near the grain boundary area, which are responsible for the pinning effect.