PSO优化多核RVM的模拟电路故障预测

针对模拟电路健康管理的特点，提出了一种基于PSO优化多核RVM的模拟电路故障预测方法。利用参数分析得到电路的输出频域响应作为特征，计算其与电路无故障标准响应的欧氏距离来表征电路元件健康值，将多个核函数线性组合，并用PSO优化多核RVM参数后的模型实现对各个时间点元件的健康值变化轨迹进行预测。仿真结果表明，该方法在小样本情况下，预测效果优于单一核函数的RVM模型，适用于健康管理中实时预测，具有较好的实用性。     

Detection of sudden pedestrian crossings for driving assistance systems

In this paper, we study the problem of detecting sudden pedestrian crossings to assist drivers in avoiding accidents. This application has two major requirements: to detect crossing pedestrians as early as possible just as they enter the view of the car-mounted camera and to maintain a false alarm rate as low as possible for practical purposes. Although many current sliding-window-based approaches using various features and classification algorithms have been proposed for image-/video-based pedestrian detection, their performance in terms of accuracy and processing speed falls far short of practical application requirements. To address this problem, we propose a three-level coarse-to-fine video-based framework that detects partially visible pedestrians just as they enter the camera view, with low false alarm rate and high speed. The framework is tested on a new collection of high-resolution videos captured from a moving vehicle and yields a performance better than that of state-of-the-art pedestrian detection while running at a frame rate of 55 fps.     

Influence of Structural Parameters of Turbocharger Floating Bearing on Its Dynamic Characteristic Coefficients

The structure parameters in an actual industrial production have a great influence on the coefficient of supercharger floating bearing dynamic characteristics,but there has been little systematic study so far. In this paper, the influence of structural parameters of the turbocharger floating bearing on its dynamic characteristic coefficientsis systematically investigated based on the theories of hydrodynamic lubrication and tribology. The influence of clearance ratio on eccentricity and the influence of internal to external radius ratios, and Sommerfeld number were analyzed.A new formula of responding characteristics of the oil film force caused by the displacement or velocity disturbance was deduced near an equilibrium in the steady state. Applying the newly developed formula, the dynamic characteristic was studied for floating bearings. Regularity for change of oil film stiffness and damping was analyzed with the structural parameters of floating bearing such as radius ratios and eccentricity.It has been found that the clearance ratio increases with eccentricity when the radius ratio is unchanged.The eccentricity decreases with the internal to external radius ratio of floating rings when the clearance ratio is constant.The absolute value of total principal stiffness and total main damping decrease with the clearance ratio and radius ratio of floating rings when the total cross damping is stable. The results and findings in this paper can contribute to nonlinear dynamics designs of turbocharger rotor-bearing systems.     

基于K均值与WPA-RBF神经网络模拟电路故障诊断

针对模拟电路故障诊断进行了研究,提出了一种新的方法。该方法包括haar的小波分解,对数据的归一化处理,以及用K均值优化RBF的中心向量和宽度,用狼群算法优化RBF的权值。首先用haar小波对所得的电路原始故障数据集进行变换,然后对变换后的数据进行归一化处理,最终得出RBF神经网络训练所需的输入数据。针对RBF神经网络中隐层节点中心、基函数宽度及权值选取困难问题,这里用K均值优化RBF的中心向量和宽度,用狼群算法优化RBF的权值,以提高网络训练稳定性与诊断成功率。最终通过两个电路的诊断实例,来论述该方法的具体实现过程,验证用该方法进行模拟电路故障诊断的可行性。     

燃烧合成Mg2Ni的影响因素

用XRD和SEM对Mg-Ni体系燃烧合成产物进行了研究。结果表明：Mg—Ni压坯预热至440℃以上均可热爆合成Mg2Ni，且预热速度越大产物越致密；过大的压坯密度，降低了体系的燃烧温度，影响Mg，Ni间的反应程度；而对于细小的Mg粒，由于较高的燃烧温度，导致合成产物出现严重的烧结现象；此外热爆合成产物在一定温度下适当的保温，有助于提高Mg2Ni的纯度。     

自适应滤波语音增强算法改进及其DSP实现

为提高强噪声环境下语音信号的信噪比,增强语音通信的质量,以DSP为平台,构建一个基于自适应滤波技术的单通道语音增强系统。该系统以TMS320F2812为核心,结合其多通道缓冲串口(McBSP)与扩展音频接口芯片TLV320AIC23实现了语音信号的高速采集及输出;同时,利用箕舌线函数更新自适应滤波步长因子并引入解相关运算进行语音降噪处理,有效改善了传统算法适应性差,收敛速度慢,稳态误差大等问题。实验结果表明该算法降噪性能好,能明显提高语音清晰度,且系统稳定性强。     

Global structure constrained local shape prior estimation for medical image segmentation

Organ shape plays an important role in clinical diagnosis, surgical planning and treatment evaluation. Shape modeling is a critical factor affecting the performance of deformable model based segmentation methods for organ shape extraction. In most existing works, shape modeling is completed in the original shape space, with the presence of outliers. In addition, the specificity of the patient was not taken into account. This paper proposes a novel target-oriented shape prior model to deal with these two problems in a unified framework. The proposed method measures the intrinsic similarity between the target shape and the training shapes on an embedded manifold by manifold learning techniques. With this approach, shapes in the training set can be selected according to their intrinsic similarity to the target image. With more accurate shape guidance, an optimized search is performed by a deformable model to minimize an energy functional for image segmentation, which is efficiently achieved by using dynamic programming. Our method has been validated on 2D prostate localization and 3D prostate segmentation in MRI scans. Compared to other existing methods, our proposed method exhibits better performance in both studies.     

Image categorization: Graph edit distance+edge direction histogram

This paper presents a novel algorithm for computing graph edit distance (GED) in image categorization. This algorithm is purely structural, i.e., it needs only connectivity structure of the graph and does not draw on node or edge attributes. There are two major contributions: (1) Introducing edge direction histogram (EDH) to characterize shape features of images. It is shown that GED can be employed as distance of EDHs. This algorithm is completely independent on cost function which is difficult to be defined exactly. (2) Computing distance of EDHs with earth mover distance (EMD) which takes neighborhood bins into account so as to compute distance of EDHs correctly. A set of experiments demonstrate that the newly presented algorithm is available for classifying and clustering images and is immune to the planar rotation of images. Compared with GED from spectral seriation, our algorithm can capture the structure change of graphs better and consume 12.79% time used by the former one. The average classification rate is 5% and average clustering rate is 25% higher than the spectral seriation method.     

HT模型矢量生成的硬件电路设计与实现

为提高高速互连电路中串扰的测试速率,减少IC测试人员的分析和研究时间,降低测试成本;在对半跳变(Half transition,HT)模型进行深入研究的基础上,得出HT模型矢量跳变的规律,并依此设计了HT模型矢量生成电路;该设计采用Verilog HDL语言对HT故障模型矢量进行RTL级建模,在Cyclonell器件(EP2C8T144C8)完成了电路实现,并用安捷伦逻辑分析采集实验数据进行实际验证;仿真和验证表明,该设计有效地生成多互连线系统HT模型测试矢量,适用于串扰故障的测试分析和研究.