Viscoelastic State for the Solutions of Spherically Symmetric Viscoelasticity Problems

The solutions of the spherically symmetric, linear, isothermal, and transient viscoelasticity problems via reciprocity theorem have been investigated for a specific material. The integral form of stress–strain relations has been used. The Laplace transform of a viscoelastic state, which is necessary for the integral equation arising as a result of reciprocity theorem, has been derived. This integral equation has been solved by Laplace transform. A sample problem has been solved to test the presented formulation. A numerical application of the analytic solution of this problem has been given.     

Electrical and optical properties of fluorine-doped CdO films deposited by ultrasonic spray pyrolysis

The CdO:F samples have been deposited onto microscope glass substrates at 250 °C by ultrasonic spray pyrolysis method. With the incorporation of fluorine into CdO, the direct optical transition has shifted towards the shorter wavelengths, and the transparency of the material has increased at a given wavelength above the fundamental absorption edge. The shift in the absorption edge is explained by means of the Moss–Burstein effect, which is also supported with the results of the current–voltage characteristics. Here, a correlation has been established between the band broadening and the increase in conductivity due to the increase in carrier density.     

Maximum power density for an endoreversible carnot heat engine

An analysis using maximum power-density criteria has been carried out for an endoreversible Carnot heat engine. The results have been compared with known results on maximum power analysis. The design parameters at maximum power density lead to smaller and more efficient endoreversible Carnot heat engines than those working at maximum power output.     

Degradation of 4-chloro-2-methylphenol in aqueous solution by electro-Fenton and photoelectro-Fenton processes

Degradation of 4-chloro-2-methylphenol (PCOC), a refractory toxic chemical emitted to the environment from the industrial production of phenoxy herbicides was studied in aqueous solution. Electro-Fenton and photoelectro-Fenton processes were used as the degradation methods. H₂O₂, produced by the reduction of oxygen at carbon cathode reacted with dissolved metal ions to form hydroxyl radicals, which in turn reacted with PCOC sequentially to degrade the aromatic ring. The effects of using different [Fe²⁺]/[PCOC]₀ and the effect of replacing Fe²⁺ by Mn²⁺ ion have been examined. It was found that degradation rate was increased with increasing [Fe²⁺]/[PCOC]₀ ratio from 2 to 4. However, the total charge utilized during the treatment was also increased. The efficiency of PCOC degradation was observed to be higher when Mn²⁺ was used as the catalyst. The mineralization of aqueous solutions of PCOC, withdrawn from the reactor at certain time interval, has been followed by total organic carbon (TOC) decay and dechlorination. A fast and complete degradation of the aromatic ring was achieved in photoelectro-Fenton system. 41.7% TOC decay and complete dechlorination were observed by consuming only 141.4 C electrical charge during a 300 min photoelectron-Fenton treatment. In the case of electro-Fenton system, 280.7 C electrical charge was consumed during 450 min of electrolysis to attain a similar degradation of PCOC. 14.9% TOC removal and 89.3% dechlorination have been obtained in this system under the applied conditions.     

PHASE EQUILIBRIUM FOR TERNARY LIQUID SYSTEMS OF WATER CARBOXYLIC ACID CHLORINATED HYDROCARBON: THERMODYNAMIC MODELING THROUGH SERLAS

Liquid-liquid equilibrium data of the solubility (binodal) curves and tie-line end compositions are presented for mixtures of [water (1) + formic acid, or acetic acid, or propanoic acid (2) + chlorobenzene, or 1,2-dichloroethane (3)] at T = 293.2 K and P = 101.3 ± 0.7 kPa. A log-basis approach, SERLAS (solvation energy relation for liquid-associated system), has been proposed to estimate the properties and liquid-liquid equilibrium (LLE) of associated systems containing proton-donating and -accepting and polar components capable of a physical interaction through hydrogen bonding or dipole-dipole interaction. The tie lines were also correlated using the UNIFAC-original model. The reliability of the models has been analyzed against the LLE data with respect to the distribution coefficient and separation factor. The proposed model appears to be an improvement in data fit for the ternary systems, yielding a mean relative error of 10.1% for all the systems considered.     

Antibody purification by concanavalin A affinity chromatography

Concanavalin A (Con A) immobilized poly(2‐hydroxyethyl methacrylate) (PHEMA) beads in a spherical form (100–150 μm in diameter) were used for the affinity chromatography purification of human immunoglobulin G (IgG) from aqueous solutions and human plasma. PHEMA adsorbents were prepared by suspension polymerization. Bioligand Con A was then immobilized by covalent binding onto PHEMA beads. The maximum IgG adsorption on the PHEMA/Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain PHEMA adsorbents was very low (ca. 0.17 mg/g). Higher adsorption values (up to 54.3 mg/g) were obtained when the PHEMA/Con A beads were used from aqueous solutions. A higher adsorption capacity was observed for human plasma (up to 69.4 mg/g) with a purity of 82.5%. The adsorption capacities of other blood proteins were 2.0 mg/g for fibrinogen and 4.2 mg/g for albumin. The total protein adsorption was determined to be 76.0 mg/g. IgG molecules could be repeatedly adsorbed and desorbed with the PHEMA/Con A beads without noticeable loss in the IgG adsorption capacity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1202–1208, 2005     

Fair referee assignments for professional football leagues

Assignment of referees to football games is an important problem faced in professional football leagues. Despite its importance, the problem has received limited academic attention. This paper presents a model and analysis of the problem for fair referee assignments, and develops a constructive heuristic and a local search procedure for its solution. Results from an extensive computational study show that the methods are effective in solving the problem in a second of computation time and yielding an excellent solution quality.     

Hydrothermal derived nanostructure rare earth (Er,Yb)-doped ZnO: structural,optical and electrical properties

The structural, optical and electrical properties of undoped and rare-earth (Er, Yb) doped zinc oxide (ZnO) nanopowder samples synthesized by hydrothermal method were investigated. The obtained samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive spectroscopy. The optical properties of undoped and rare-earth (Er, Yb) doped ZnO were carried out with UV–visible diffuse reflectance spectroscopy techniques. XRD results reveal that Yb and Er doped ZnO nanopowders have single phase hexagonal (Wurtzite) structure without any impurities. SEM analysis indicate that dopants with different radii affected the surface morphology of ZnO nanostructures. The optical band gap of all samples were calculated from UV–Vis diffuse reflectance spectroscopy data. We have obtained band gap values of undoped, Er and Yb doped ZnO as 3.24, 3.23, 3.22 eV, respectively. Electrical characterization of the samples were made in the 280–350 K temperature range using Van der Pauw method based on Hall effect measurement. The carrier concentrations decreased for both Er and Yb doping while the Hall mobility and electrical resistivity increased with Yb, Er doping compared to undoped ZnO nanopowder at room temperature. The temperature dependent resistivity measurements of Er doped ZnO showed a metal–semiconductor transition at about 295 K, while Yb doped ZnO showed characteristic semiconductor behavior.