Performance study of iSCSI-based storage subsystems

iISCSI is emerging as an end-to-end protocol for transporting storage I/O block data over IP networks. By exploiting the ubiquitous Internet infrastructure, iSCSI greatly facilitates remote storage, remote backup, and data mirroring. This article evaluates the performance of two typical iSCSI storage subsystems by measuring and analyzing block-level I/O access performance and file-level access performance. In the file-level performance study, we compare file access performance in an NAS scheme with that in an iSCSI-based SAN scheme. Our test results show that Gigabit Ethernet-based iSCSI can reach very high bandwidth, close to that of a direct FC disk access in block I/O access. However, when the iSCSI traverses through longer distance, throughput relies heavily on the available bandwidth between the initiator and the target. On the other hand, the file-level performance shows that iSCSI-based file access (SAN scheme) provides higher performance than using NFS protocol in Linux and SMB protocol in Windows (NAS scheme). However, the advantage of using iSCSI-based file accesses decreases as the file size increases. The obtained experimental results shed some light on the performance of applications based on iSCSI storage.     

新取代苯基荧光酮试剂的合成及其性质的研究Ⅱ．新型取代苯基荧光酮与金属离子显色反应的研究

研究了３，５－二溴－４－氨基苯基荧光酮、３，５－二溴－４－偶氮变色酸等８种苯基荧光酮在酸性介质中与高价金属离子Ｚｒ（Ⅳ）、Ｍｏ（Ⅵ）、Ｗ（Ⅵ）、Ａｌ（Ⅲ）、Ｇａ（Ⅲ）等的显色反应。３，５－位二溴取代的试剂的灵敏度高于未取代的灵敏度，摩尔吸光系数绝大多数在１０５Ｌ·ｍｏｌ－１·ｃｍ－１以上。     

基于区间树硬件加速索引的Marching Cubes算法

为了充分利用GPU的海量线程并行架构,提高等值面可视化效率,提出一种基于区间树硬件加速索引的Marching Cubes算法.该算法在预计算阶段利用GPU构造多区域的区间树作为体数据体素的值域索引;在实时运行阶段根据用户给定的阈值,通过该索引并行地搜索活跃体素,并生成活跃体素的多级索引,然后分配线程处理活跃体素,抽取并绘制等值面.将文中算法应用到不同体数据上的实验结果表明,其能够显著地提高现有Marching Cubes算法的效率;与现有的GPU基准算法相比,最高能达到4～10倍的加速比.     

基于CAE的模态综合法误差分析

为研究用模态综合法进行发动机舱前端模型NVH分析时的误差,用整体计算法和模态综合法分别进行截止频率为100,200,300,1 000,2 000和3 000 Hz的模态计算,并基于模态计算结果进行原点传递函数计算.结果表明:考虑静态补偿的模态综合法计算误差小于不考虑静态补偿的计算误差;子系统模态计算截止频率大于2倍原点传递函数频率时,模态综合法计算误差小于10%;当传递函数频率是截止频率的1/3时,误差可以降低到5%。     

非部分嵌套信息结构的LQG动态队决策问题的可解性（II）*

本文讨论非嵌套信息结构的递阶队决策问题和控制均享信息结构的LQG分散控制问题,文中首先证明这两类问题的信息结构都是“部分控制嵌入”的,进而给出最优策略(或控制)存在的充要条件和当此条件成立时最优策略(或控制)的表达式。     

Synthesis,characterization, and optoelectronic properties of two new polyfluorenes/poly(p‐phenylenevinylene)s copolymers

Two novel copolymers of polyfluorenes/poly(p‐phenylenevinylene)s copolymers with p‐tert‐butyl‐phenylenemethylene groups in the C‐9 position of alternating fluorene unit, poly[1,4‐(2,5‐dibutyloxyl)‐phenyleneviny lene‐alt‐9‐(p‐tert‐butyl‐phenylenemethylene)fluorene] and poly[1,4‐(2,5‐dioctyloxyl)‐phenylenevinylene‐alt‐9‐(p‐tert‐butyl‐phenylenemethylene)fluorine], have been synthesized via the Heck polycondensation reaction. The synthesized polymers were characterized by FTIR, NMR, DSC, TGA, UV–vis, and PL spectra. The polymers showed high glass transition temperatures and good thermal stability. A polymer light‐emitting diode with the configuration ITO/PEDOT:PSS/P2/Ca/Al has been fabricated. The device emitted a yellow light with a peak wavelength of 578 nm similar to the PL spectra of the copolymer film. A maximal luminance of 534 cd/m² was obtained at a driving voltage of 24.5 V. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3955–3962, 2006     

淤浆鼓泡床中固体粒子的悬浮特性

研究了三相鼓泡床中的临界固含率,以空气作气相,水、乙醇-水、丙酮-水、萜松醇-二甲苯作液相,石英砂、煤、雷奈镍作为固相。分析了鼓泡柱的高径比、气体速度、固体粒子的大小和比重、液体的粘度对临界固含率的影响,提出了含有这些参数的无因次数群的关联式,讨论了本文提出的关联式和文献报导的差别。     

Lode应力参数与应力参量之间的内在联系及屈服准则的推广

从塑性力学应力Ｌｏｄｅ参数着手，深入研究了应力Ｌｏｄｅ参数与各应力参量之间的内在联系，并对塑性理论中屈服准则进行了合理推广。对塑性理论及其应用具有重要意义。     

宽板V型自由弯曲智能化控制过程的解析定量描述

板料在弯曲卸载过程中,由于弹性变形回复,从而产生回弹。回弹的结果使弯曲件的精度降低。影响回弹的因素很多,也很复杂。根据弹塑性弯曲理论,在平面变形假设的前提下,考虑了材料的硬化、各向异性及弹性变形,对宽板V型自由弯曲应力应变进行了分析,得到了弹塑性交界处曲率半径,推导出了弯曲力及目标弯曲角随弯曲行程变化的关系式。理论计算与实验及数值模拟结果进行了比较,为宽板V型自由弯曲智能化控制中参数识别及预测模型输入层和输出层变量的确定提供了理论依据。     

面向属性的参数化建模在Revit API中的应用

为改进目前构件级建模过程存在的效率低问题,提出面向属性的参数化建模过程.此方法使建模师不需要重复传统建模操作,通过设置模型属性参数就可以实现相关数据的统计和计算从而快速建模.以球面网格结构为例,将参数化建模思想融入到Revit二次开发技术中,借用VS开发工具实现三维模型的快速生成.在操作时,用户只需通过用户界面输入矢高、跨度和环数等结构参数即可以完成模型的快速建立.通过此程序,还可以实现肋环形和施威德勒型2种类型的选择,实时监测设置的参数是否满足规范要求.