Fracture and deformation properties of Ni-Fe superalloy in cryogenic high magnetic field environments

The present paper includes experimental and analytical data on the fracture properties of a nickel-iron superalloy, a ferromagnetic austenite, at 4 K in magnetic fields of 0 and 6 T. The tensile, notch tensile and small punch tests are employed. A finite element analysis is also performed to convert the experimentally measured load-displacement data into useful engineering information. To interpret the results we review the available theory of the influence of magnetic field on the stress intensity factor for a crack in ferromagnetic materials.     

Wide-band polarization-independent tensile-strained InGaAs MQW-SOAgate

A high-performance tensile-strained InGaAs multi-quantum-well semiconductor optical amplifier (MQW-SOA) gate developed for wavelength-division-multiplexing (WDM) applications is reported. The -0.47% InGaAs-strained SOA gate has a very low polarization dependence of 0.3 dB over a driving current between 30 and 60 mA and a wide-input signal wavelength range from 1530 to 1580 nm. The fabrication tolerance of the mesa stripe width is very large, ranging from 1.0 to 1.75 μm. The MQW-SOA gate has an extinction ratio of more than 40 dB. The fiber-to-fiber lossless operation current is less than 50 mA over the fiber-amplifier gain band. The gating speed is less than 1 ns     

Nonlinear Optical Properties of TeO2-Based Glasses: MOx-TeO2 (M = Sc, Ti, V, Nb, Mo, Ta, and W) Binary Glasses

The third-order nonlinear optical susceptibilities, X⁽³⁾, of TeO₂-based glasses containing transition metal oxides (M = Sc₂O₃, TiO₂, V₂O₅, Nb₂O₅, MoO₃, Ta₂O₅, and WO₃) glasses have been measured by the third harmonic generation (THG) method in order to investigate the effect of the empty d-orbital contributions to the third-order nonlinear optical susceptibilities. It is found that the addition of TiO₂, Nb₂O₅, and WO₃ to TeO₂ glass increases the X⁽³⁾ value as well as the refractive index, while others decrease both of them. The positive effect of the TiO₂, Nb₂O₅, or WO₃, on the X⁽³⁾ of TeO₂ glass was interpreted in terms of the cationic empty d-orbital contribution. There is an almost linear relation between the X⁽³⁾ and the term (n²_ω+ 2)³.(n²_ω -1).E_d/E²₀ containing three measurable parameters only, irrespective of the kinds of MO, which was derived based on the bond orbital theory developed by M. E. Lines. The largest X⁽³⁾ value obtained is 1.69 × 10⁻¹² esu for 30NbO_2.5.70TeO₂ glass, about 60 times larger than that of pure fused silica glass.     

An image analyzing system using an artificial neural network forevaluating the parenchymal echo pattern of cirrhotic liver and chronichepatitis

To objectively evaluate the parenchymal echo pattern of cirrhotic liver and chronic hepatitis, the authors applied an image analyzing system (IAS) using a neural network. Autopsy specimens in a water tank (n=13) were used to examine the relationship between the diameter of the regenerative nodule and the coarse score (CS) calculated by IAS. CS was significantly correlated with the diameter of the regenerative nodule (p<0.0001, r=0.966). CS is considered to be useful for evaluating the coarseness of the parenchymal echo pattern     

Molecular basis of a hereditary type I protein S deficiency caused by a substitution of Cys for Arg474

The molecular basis for a hereditary type I protein S (PS) deficiency was investigated. DNA sequence analysis in the proband showed a novel missense mutation substituting Cys (TGT) for Arg474 (CGT) that is a highly conserved amino acid residue among the related proteins. This missense mutation cosegregated with the type I PS deficiency in this family. Transient expression studies showed that the secretion of the recombinant Cys-mutant PS was markedly decreased compared with that of the recombinant wild-type PS, reproducing the observed phenotype of type I deficiency. Stable expression and pulse-chase experiments demonstrated an intracellular degradation and an impaired secretion of the recombinant Cys-mutant PS. Furthermore, the substitution of Arg474 by Ala or Glu, but not by Lys, markedly reduced the secretion of the recombinant PS mutants in transient expression studies, suggesting that a positively charged basic amino acid might be needed at residue 474 and might play a key role in the protein structure and conformation of the sex hormone binding globulin-homology domain of the PS molecule. We postulate that the loss of the highly conserved Arg474 might be responsible for the type I PS deficiency inherited in this family.     

Requirement of major histocompatibility complex-compatible microenvironment for spleen colony formation (CFU-S on day 12 but not on day 8)

The objectives of this study were 1) to evaluate interleukin-8 concentrations in cervical secretions in predicting preterm delivery, microbial invasion of the amniotic cavity and histologic chorioamnionitis in patients with preterm labor and intact membranes and 2) to compare the diagnostic value of interleukin-8 with fetal fibronectin determinations in predicting preterm delivery, microbial invasion of the amniotic cavity and histologic chorioamnionitis in patients with preterm labor and intact membranes. Interleukin-8 and fetal fibronectin were assayed in cervical secretions in 106 patients with singleton pregnancies and intact membranes admitted for preterm labor. Amniotic fluid obtained by amniocentesis was cultured and placentas (No = 43) analyzed for the presence of chorioamnionitis. The prevalence of pregnancies delivered preterm was 46.2% (49/106) and 15.09% (16/106) of amniotic fluid cultures were positive. Interleukin-8 levels in cervical secretions were significantly increased in patients who delivered preterm (p < or = 0.0001), in presence of positive amniotic fluid culture (p = 0.0016) and histological chorioamnionitis (p = 0.008) than in patients with negative findings. Receiver-operator characteristics curve analysis showed that an interleukin-8 value > 450 pg/ml is comparable to that of a fetal fibronectin value > 50 ng/ml in predicting preterm delivery (p = 0.247). Among patients who delivered preterm interleukin-8 concentrations > 860 pg/ml predicted a positive amniotic fluid culture with a sensitivity of 81.2% and a specificity 66.6%. Further, in patients who delivered preterm and had a negative amniotic fluid culture, IL-8 concentrations > 480 pg/ml predicted histological chorioamnionitis with a sensitivity 78.5% and specificity 61.5%. A positive fetal fibronectin > 50 ng/ml was not predictve of either a positive amniotic fluid culture or the presence of histological chorioamnionitis. In conclusion, increased concentrations of interleukin-8 and fetal fibronectin are associated with impending delivery and their diagnostic value seems comparable. However, interleukin-8 concentrations identify patients at risk of a positive amniotic fluid culture and the presence of histological chorioamnionitis. Measurement of interleukin-8 in cervical secretion is a non-invasive method to identify patients at risk for both preterm delivery and intrauterine infection.     

Induced-fit association between DNA and esperamicin. Importance of structural flexibility in host DNA duplex

In this study, a series of synthetic oligonucleotide duplexes are tested as a substrate for esperamicin. The duplexes contain a typical binding sequence of esperamicin, 5'-GGA/TCC, but have different flexibilities in helix structure from each other. When cleavage activities of these oligonucleotides by esperamicin were estimated by using DNA sequencing method, a substantial increase of the cleavage at 3'-NAGG was observed with increasing the helix flexibility. This observation indicates that structural flexibility of host DNA duplex is important in an induced-fit association between esperamicin and DNA.     

Photoelectrochemical properties of sol–gel-derived Ti1−xVxO2 solid solution film photoelectrodes

Ti_1−xV_xO₂ solid solution film photoelectrodes were prepared by the dip-coating sol–gel method. X-ray diffraction and X-ray photoelectron spectroscopy were employed to ensure the formation of the solid solution and their composition. Obvious photoresponses were observed in the visible region for the solid solution film electrodes with x0.05 and the red shift of the photoresponse was enhanced with increasing x. Moreover, the solid solution film electrodes were found to be photoelectrochemically stable. However, the onset potential of photocurrent shifted positively with increasing x. Band model of the solid solution was suggested to explain the effects of the vanadium incorporation on the photoelectrochemical properties.     

Preparation of multiple oxide BaTiO3 fibres by the sol-gel method

Multiple oxide BaTiO₃ gel fibres were prepared by the sol-gel method from Ba(OC₂H₅)₂-Ti(O-isoC₃H₇)₄-H₂O-C₂H₅OH-CH₃COOH and Ba(CH₃COO)₂-Ti(O-isoC₃H₇)₄-H₂O-CH₃COOH solutions. Relatively long gel fibres of 10cm length were obtained from both solutions in the limited composition region. The latter solution in particular showed a spinnability even when it contained no water. Therefore, the occurrence of spinnability of the solution was considered to be due to the formation of linear polymers composed of bridging acetate groups such as TiO-C(CH₃)-O-Ti rather than metalloxane bonding as Ti-O-Ti. Addition of water to the solutions seems to break the bridging acetate bonds and replace some of them by bridging oxygen bonds. The as-drawn gel fibres which were X-ray amorphous crystallized into BaTiO₃ ceramic fibres of 5mm average length upon heating above 600 ° C. However, the gel fibres drawn from the sols without water became powdery on heating because of the lack of Ti-O-Ti metalloxane bonds. The crystallization behaviour of the BaTiO₃ gel fibres is discussed based on the infrared spectroscopy, X-ray diffraction analysis and thermogravimetric-differential thermal analysis.     

Development of a dual‐lamp projector with higher brightness

Stationary projectors mainly used in system applications have recently gained a wider application range, including general presentations in halls and large conference rooms and being used, for example, in digital signage and for monitoring purposes. Consequently, they are required to meet new market demands for durability, reliability, and flexibility in installation in addition to their conventional basic performance such as especially high brightness. To achieve especially high brightness, a new optical system with two lamps is proposed; the profile of the cover glass that prevents the glass from scattering is made aspherical, the profile of the beam‐combining mirror is improved with its position optimized, and the size of the incident plane of the integrator rod is made larger (1.1 times). These measures resulted in an optical system of an even higher efficiency with 7000 lm, which is the highest in its class (according to a June 2010 investigation). Also, the arrangement of two parallel lamps completely eliminated the effect of heat passing from one lamp to the other, which helped secure durability, reliability, and flexibility in installation. Furthermore, the combined use of the unique non‐telecentric optical system, adopted from the conventional single‐lamp model, helps maintain the class‐highest contrast ratio.^1,2