Graphite formation on Ni film by chemical vapor deposition

Thin film formation of graphite by chemical vapor deposition using 2-methyl-1,2′-naphthyl ketone as a starting material was carried out on Ni film substrates. On Ni films directly deposited on quartz glass, the graphite films were obtained when the Ni film thickness was above 1 000 Å and above 5 000 Å at 700 °C and 1 000 °C, respectively. Depositions on thinner Ni film substrates comprise amorphous carbon (a-C) or graphite tubes which was owing to the thermal coagulation of the Ni film into droplets. On the other hand, graphite film was obtained on the Ni film with thickness 10 Å when a-C was inserted between the Ni film and the quartz glass. The coagulation of the Ni film is considered to be avoided by inserting a-C layer.     

Clinical features of primary and secondary atypical mycobacteriosis

A clinical investigation was carried out in 39 patients with atypical mycobacteriosis (AM). The patients at our hospital diagnosed as having AM during an 11-year period from 1981 to 1991 were reviewed in this study. The incidence of AM among all of mycobacterial infections has been increasing since 1988. The atypical mycobacteria detected included M. avium complex (MAC) in 79%, M. kansasii in 26%, and other organisms in 5%. Patients who had primary infection without underlying respiratory disease were compared with those who had secondary infection. In secondary infection, MAC was detected in the sputum of a high percentage of patients and was positive for more than 6 months despite therapy. Gamma globulin levels were also increased in patients with secondary infection. Cell mediated immunity was examined by the DNCB reaction and the detection of CD4- and CD8- positive T lymphocytes. The DNCB skin reaction was positive in 6 out of 26 patients with secondary infection. The percentage of CD8- positive T lymphocytes was higher in patients with secondary disease. Fischer's ratio (indicating the balance of plasma amino acids) was also examined as an index of the nutritional status. It was significantly lower in secondary infection compared with primary infection. Moreover, secondary infection was associated with a lower positive rate for the DNCB skin reaction and a lower Fischer's ratio when compared with pulmonary tuberculosis. Thus impairment of cell-mediated immunity, malnutrition, and a poor prognosis were significantly more common in secondary infection compared with primary infection.     

Screening of Inhibitors Targeting Heat Shock Protein 47 Involved in the Development of Idiopathic Pulmonary Fibrosis

Heat shock protein 47 (HSP47), a collagen-specific molecular chaperone, is causally related to fibrotic diseases, including idiopathic pulmonary fibrosis. The identification of Compounds that interfere with the HSP47-collagen interaction is essential for the development of relevant therapeutics. Herein, we prepared human HSP47 as a soluble fusion protein expressed in E. coli and established an assay system for HSP47 inhibitor screening. We screened a natural and synthetic Compound library established at Nagasaki University. Among 1023 Compounds, 13 exhibited inhibitory activity against human HSP47, of which three inhibited its function in a dose-dependent manner. Epigallocatechin-3-O-gallate, one of these three Compounds, is a typical polyphenol Compound derived from tea leaves. Structurally related Compounds were synthesized and examined for their activity, revealing a hydroxyl group at A-ring position 5 as important for its activity. The present findings provide valuable insight for the development of natural product-derived therapeutics for fibrotic diseases, including idiopathic pulmonary fibrosis.     

Lysozyme requires fluctuation of the active site for the manifestation of activity

Mutations around His15 which lie far away from the active site,stimulated glycol chitin activity of lysozyme at physiologicaltemperature. Del-Argl4Hisl5 lysozyme, a mutant lysozyme whoseArgl4 and Hisl5 were deleted together, and has the highest activityamong these mutant lysozymes, had a similar binding abilityto a trimer of N-acetyl-glucosamine, a substrate analogue, relativeto native lysozyme. This suggests that the increased activitywas due to an increased k_cat in the catalysis reaction. TheH-D exchange rate of the N-1 proton in the Trp63 which is locatedin the active site cleft, was enhanced in the Del-Argl4Hisl5lysozyme, while 2-D proton NMR analysis revealed no conformationalchange around Trp63. We conclude that some sort of fluctuationat the active site might be required for the manifestation ofactivity. This theory is supported by the finding that the Del-Argl4Hisl5lysozyme showed a shift in temperature dependency of activityto lower temperatures compared with that of native lysozyme.     

Detection of a brain aneurysm and a way to search for a brain aneurysm aimed at the development of a system to simulate an operation

In this article, a system is proposed for a simulated operation which would help a trainee surgeon to perform a medical operation to ensure that a cerebral aneurysm does not burst. The physician will have acquired empirical medical technologies from operations in traditional clinical teaching. However, there is a problem with safety and the burden to the patient. Therefore, recently a new training approach for a simulated medical operation using virtual reality has been explored. With the aim of developing a simulated system for a medical operation for a cerebral aneurysm, we considered the necessary functions such as detecting the brain aneurysm that is the target of the operation, and searching for a suitable blood vessel to make a plan for the operation.     

Splitting a configuration in a simplex

This paper presents a new method of partition, named-splitting, of a point set ind-dimensional space. Given a pointG in ad-dimensional simplexT, T(G;i) is the subsimplex spanned by G and the ith facet ofT. LetS be a set ofn points inT, and let be a sequence of nonnegative integers ₁, ..., n_d+1 satisfying _i=1 ^d+1 ₁=n The-splitter of (T, S) is a pointG inT such thatT(G;i) contains at least _i points ofS in its closure for everyi=1, 2, ...,d + 1. The associated dissection is the re-splitting.The existence of a-splitting is shown for any (T, S) and, and two efficient algorithms for finding such a splitting are given. One runs inO(d²n logn + d³n) time, and the other runs inO(n) time if the dimensiond can be considered as a constant. Applications of re-splitting to mesh generation, polygonal-tour generation, and a combinatorial assignment problem are given.     

Shear viscosity of the B phase of superfluid3He

The shear viscosity (T) in the Balian-Werthamer (BW) state of superfluid ³ He is calculated variationally throughout the region 0t 1(t=T/T _c) from the transport equation for Bogoliubov quasiparticles. Coherence factors are treated exactly in the calculation of the collision integral. The numerical result for =_s= _s(T)/_n(T_c) agree very well with experiment in the range 0.8t1.0. Analytic expressions = 0.577 (1–1.0008t) and =1–(23/64) [=(T)/k _B T] are obtained in the low-temperature region and in the vicinity ofT _c, respectively. From the numerical analysis it is shown that the latter equation is valid only in the temperature range 0.9997t1.0.Supported by the Research Institute for Fundamental Physics, Kyoto University.     

Dominant stress region for crack initiation at interface edge of microdot on a substrate

In order to examine the mechanics of crack initiation at the free interface edge of a microcomponent on a substrate, delamination tests are carried out for two specimen shapes of Cr microdots on a SiO₂ substrate. The microdots of the first specimen are shaped like the frustum of a round cone. The Cr microdots are successfully delaminated from the SiO₂ substrate in a brittle manner and the critical load is measured by atomic force microscopy (AFM) with a lateral loading apparatus. Stress analysis reveals that a singular stress field exists near the interface edge and the strength for the crack initiation is governed by the intensified normal stress field. The critical stress intensity parameter is evaluated as K_σC ≈ 0.24 MPa m^0.39. Similar delamination tests are conducted for microdots shaped like the frustum of an oval cone. The stress distributions at the crack initiation of this specimen shape show a higher normal stress than the first specimen shape in the region near the interface edge of about x < 40 nm, while it is lower in the region of about x > 50 nm (x: distance from the edge). This suggests a limitation of conventional fracture mechanics: namely, the crack initiation in these specimens is not uniquely governed by the intensity of the singular field. It is found that the delamination crack is initiated when the averaged stress σ_ya in the region of 90-130 nm reaches 190-270 MPa, regardless of the specimen shape. This indicates that the dominant stress region of crack initiation is roughly estimated as 90-130 nm and the criterion is given in terms of the averaged stress in the region.     

Orthogonal queries in segments

We consider theorthgonal clipping problem in a set of segments: Given a set ofn segments ind-dimensional space, we preprocess them into a data structure such that given an orthogonal query window, the segments intersecting it can be counted/reported efficiently. We show that the efficiency of the data structure significantly depends on a geometric discrete parameterK named theProjected-image complexity, which becomes Θ(n ²) in the worst case but practically much smaller. If we useO(m) space, whereK log^4d−7 n≥m≥n log^4d−7 n, the query time isO((K/m)^1/2 log^{max{4, 4d−5}} n). This is near to an Ω((K/m)^1/2) lower bound.