Chirality-antimicrobial relationship of quaternary ammonium cationics

Optically active and racemic quaternary ammonium cationics containing a chiral alkyl group, such as N,N-dimethyl-N-(1-phenylethyl)alkylammonium bromides were prepared and showed excellent antimicrobial properties against Gram positive and negative bacteria, with some exceptions, and against fungi. The influence of optical isomerism on their antimicrobial properties showed that the antimicrobial properties between racemic and optically active cationics were obscure. The order of activity of substituted alkyl groups was tetradecyl > dodecyl ° hexadecyl.     

An improved cryofixation method: cryoquenching of small tissue blocks during microwave irradiation

The metal contact method of rapid freezing is greatly improved by irradiating the specimen with microwaves at 2.45 GHz for a short period of time (50 ms), while pushing the specimen onto the surface of the copper block cooled by liquid N₂. The microwave irradiation, together with two technical improvements (a light-mass plunger and a recently developed β-gel shock absorber) for preventing bounce, produces a good freezing zone for squid retina, with high reproducibility for each experimental trial, extending from the contact surface to a depth of about 15 μm, which is comparable to the depth obtained by the metal contact method using liquid He in the absence of microwave irradiation. A good freezing zone was also experimentally demonstrated in specimens of rat liver and heart muscle. Microwave irradiation does not have appreciable effects on the ultrastructure of squid retina. The mechanism underlying the improvement in the rapid freezing under the microwave irradiation is discussed.     

Endogenous adenosine exerts inhibitory effects upon the development of spreading depression and glutamate release induced by microdialysis with high K+ in rat hippocampus

Spreading depression (SD) is known to be involved in the N-methyl-D-aspartate receptor-mediated neuronal damage. In urethane-anesthetized rats, we examined the release of adenosine and glutamate during SD induced by microdialysis of high K+ perfusate through the hippocampal CA1 area. The effects of endogenous adenosine upon SD were studied by applying an adenosine antagonist, theophylline (1 mM) and by a simultaneous application of adenosine uptake blockers, dipyridamole (DPR) (100 microM) and nitrobenzylthioinosine (NBI) (50 microM). The dialysates were sampled every 5 or 10 min and analyzed by HPLC. SD was identified by flattening of background EEg and disappearance of population spikes recorded from the pyramidal cell layer of CA1 area by a glass microelectrode. Adenosine and glutamate release was enhanced significantly in association with the occurrence of SD. Theophylline increased the release of glutamate and the incidence of SD and decreased the latency of the SD occurrence. DPR+NBI decreased the release of glutamate and the occurrence of SD, but increased extracellular adenosine concentration. The effects of DPR+NBI were blocked by application of a selective antagonist of adenosine A1 receptor, 8-cyclopentyl-1,3-dipropylxanthine (DPCPX, 0.1 microM). These findings suggest that endogenous adenosine exerts inhibitory influences upon the development of SD and the glutamate release through the A1 receptor in rat hippocampus.     

Superoxide dismutase and total antioxidant status of larvae and adults of Trichostrongylus colubriformis, Haemonchus contortus and Ostertagia circumcincta

By means of modern color-coded duplex sonography (CCDS) even very small vessels can be visualized. Maximum resolution nowadays is about 0.5 mm diameter of the vessel. We compared the use of CCDS and angiography in studying of acral perfusion. Besides morphologic criteria, hemodynamic criteria were recorded. Arteries in healthy fingers appear as long and straight vessels with a clearly defined border. The physiological maximal blood flow velocity exceeded 20 cm/s. CCDS revealed tortuosity of finger arteries as typical finding in thrombangiitis obliterans. Segmental stenosis can either be identified morphologically or quantified by measurement of the flow velocity with poststenotic maximal systolic velocities of less than 20 cm/s or by the acceleration of the blood flow within the stenosis, as proven by angiographic examinations. CCDS is suitable for evaluation of acral perfusion in patients suffering from secondary Raynaud's syndrome. Apart from diagnosis of disturbed acral circulation, other possible applications of CCDS are in in the surgical field, for example replantations in hand or finger surgery.     

Co-crosslinking blend of incompatible polymers VI: Poly(vinyl chloride) toughened with polyethylene via a co-crosslinking technique

A binary blend which consists of two incompatible polymers such as poly(vinyl chloride) and polyethylene has been performed through a partial co-crosslinking reaction with peroxide to give a co-crosslinked blend with a uniform dispersion of small polyethylene particles and with an improved mechanical property. The results are obtained through the formation of a co-crosslinked product which acts as a potential solid phase dispersant as well as a well-bonded reinforcing interlayer on polyethylene particles uniformly dispersed in poly(vinyl chloride) matrix. The resulting blends (PVC/PE=10/90 wt) give carbon spherules of 0.5 to 1m diameter through pressure-carbonization at 650° C for 1 h.     

Study on triazine thiols. IV. Action of triazine thiols and their metal salts to peroxide

Decomposition of t-butylhydroperoxide was retarded by triazine thiols and their zinc salts, but accelerated by the copper salts of triazine thiols as well as sulfur compounds such as dithiocarbamates and mercaptobenzothiazolates. Triazine thiols and their zine salts are effective antioxidants for polyethylene crosslinked with peroxide and containing copper, and for protecting epichlorohydrin vulcanizates against attack by “sour” or hydroperoxide-containing gasoline.     

A novel agglomeration granulating system utilizing a centrifugal-fluidizing drive

Necessary conditions were studied for the optimum operation of agglomeration granulation. The mechanisms that would realize these conditions were investigated by several experiments.On the basis of the results obtained, a novel granulating system involving a surface wetness control mechanism has been developed.The present paper describes the mixing and dispersing characteristics of the coating vessel, the detection method for wetness control, the particular spraying units, and the operating conditions thereof, together with the characteristics of this newly developed powder coating granulation system.This system has been shown to provide an easy and reproducible granulating technique even when products below 1 mm in size are required.     

Sintering of Ceria-Doped Tetragonal Zirconia Crystallized in Organic Solvents, Water, and Air

Amorphous CeO₂–ZrO₂ gels were prepared by coprecipitation in ammonia solutions. The onset of crystallization of the gels, from calcining in air, was 420°C, while 200° to 250°C in the presence of water and organic solvents such as methanol and ethanol. The sintering behaviors of CeO₂–ZrO₂ powders were sensitive to the crystallizing conditions, since hard agglomerates formed when the precipitated gels were crystallized by normal calcination in air, whereas soft agglomerates formed when they were crystallized in water or organic solvents. CeO₂–ZrO₂ powders crystallized in methanol and water at 250°C were sintered to full theoretical density at 1150° and 1400°C, respectively, whereas that crystallized by calcination in air at 450°C was sintered to only 95.2% of theoretical density, even at 1500°C.     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Effects of 6-anilino-1,3,5-triazine-2,4-dithiol,zinc stearate,and barium stearate on the thermal stabilization of PVC

Individual action and synergistic effect in the combination of 6-anilino-1,3,5-triazine-2,4-dithiol (AF), zinc stearate, and barium stearate on the color stabilization of PVC were investigated. In this system, AF selectively reacts with allylic chlorine atoms in PVC. Consequently, unstable allylic chlorine units were converted to thermally stable allylic structures, thus retarding the development of polyene sequences. Zinc stearate accelerated the reaction of AF with allylic chlorine atoms in PVC, forming the zinc salts of AF (AFZ_nSt, St?C₁–H₃₅COO? ) by reacting with AF. Barium stearate reacted with ZnCl₂ which is formed in the above reaction to give St₂Zn and BaCl₂. Consequently, barium stearate led to the selective reaction of AF with allylic chlorine atoms in PVC and the remarkable retarding effect of discoloration of PVC.