Electrical properties and positron annihilation study of (Ba<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript>Ho<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>)TiO<Subscript>3</Subscript> ceramics

DC resistivity, dielectric constant, dielectric loss and positron annihilation spectra of (Ba_1−x Ho _x )TiO₃ ceramics have been measured as a function of holmium concentration x. It has been found that the DC resistivity of (Ba_1−x Ho _x )TiO₃ is strongly dependent on the Ho content: it decreases three orders of magnitude and reaches a minimum at x = 0.4%. Doping with 0.6% holmium increases the permittivity of BaTiO₃ by approximately three times (from ∼1,300 to ∼4,000), with only a slight increase in the corresponding dielectric loss. The local electron density and defect concentration estimated using positron annihilation technique conforms well to the features found in the dielectric and resistivity measurements. The results have been discussed in terms of a mixed compensation model.     

住宅建筑结构中隔震技术的应用和经济评价

对当前隔震系统做了简单介绍 ,介绍了基础隔震的技术和施工方法等。讨论在住宅结构中推广隔震技术的方法 ,对各种类型的住宅结构做经济评价 ,讨论推广的可能性和难点。     

A dynamic programming method for analysis of bridges under multiple moving loads

A dynamic programming (DP) method is presented for analysis of statically determinate and indeterminate bridges subjected to moving loads such as those specified by the American Association of State Highway and Transportation Officials (AASHTO) specifications. These loads consist of uniform lane loading, two-axle truck loading and two-axle truck plus one-axle semitrailer loading. The solution of the DP problem is based on the use of influence line diagrams and extremum functions. Recurrence formulae have been developed for various types of AASHTO live loads. The procedure presented in this article is quite general and can be applied to any type of structures with linear behaviour and any type of moving loads. Six examples are presented: a simply-supported beam, a simply-supported Pratt truss, an arch bridge, a continuous Pratt truss, a continuous frame and a cable-stayed bridge.     

油田放射性作业人员外周血淋巴细胞染色体畸变的观察

本文调查了油田212例受γ射线和中子混合辐射照射的作业人员和30例正常人的外周血淋巴细胞染色体畸变。作业人员受γ射线照射的人均年受照剂量为1.28mGy。调查结果表明,放射性测井人员与正常人相比染色体畸变率有显著差异。     

Silicon doped carbon/Cu joints based on amorphous alloy brazing for first wall application

Amorphous ribbon-type filler-metals represent a promising selection for joining heterogeneous materials together. In this work, rapidly solidified ribbon-type Ti based amorphous filler with a melting temperature of 850 °C and a thickness up to 20 μm is used to join silicon doped carbon to pure copper. SEM examinations demonstrate that a high quality brazed joints could be acquired. The brazed seam has a uniform structure and pore free along its entire length. TiC and ZrC are formed near the interface of carbon and filler-metal when the brazing holds enough time. Using very thin Mo and Cu foil (0.2 mm in thickness) as multiple interlayer are very effective to mitigate the thermal stress occurred in the interface between carbon and copper. The shear strength of this carbon-multiple interlayer-copper joint is more than 20 MPa, and the rupture is mainly occurred on the carbon side.     

双能X射线骨密度仪测定技术研究

以Ｌｕｎａｒ公司ＤＰＸ－Ｌ型双能Ｘ射线骨密度仪为例，研究引起测量误差的主要因素并提出质控措施。用自检模块、腰椎体膜评定仪器的体外测量精度好于１％。对１０位志愿者重复２次测量，体内精度对腰椎，ＭＰＤ（平均百分差）为０．４６，ＣＶ（变异系数）为０．７５；对股骨颈，ＭＰＤ为１．２６、ＣＶ为０．４７；Ｗａｒｄ’ｓ三角区ＭＰＤ为２．０１、ＣＶ为１．１４；大转子ＭＰＤ为１．６６、ＣＶ为０．７２。扫描图像由２位     

Nonregular feedback linearization: a nonsmooth approach

In this note, we address the problem of exact linearization via nonsmooth nonregular feedback. A criterion of nonregular static state feedback linearizability is presented for a class of nonlinear affine systems with two control inputs, and its application to nonholonomic systems is briefly discussed.     

网上购物系统数据库与数据仓库的比较分析

比较了数据库及数据仓库,通过网上购物系统平台的研究,分析了两者在数据信息处理中的异同,从而达到让网上购物更加完善、更加便捷地为用户服务的目的。     

FD—140型高灵敏测氡仪及其应用

FD—140型高灵敏测氡仪用于测量氡的浓度,测氡灵敏度可达15mBq/m~3 min。该仪器可用于普查与勘探铀矿床,也可用于找石油、煤、金、地下水和地震预报以及地质构造调查等方面。     

A saliency-driven robotic head with bio-inspired saccadic behaviors for social robotics

This paper presents a robotic head for social robots to attend to scene saliency with bio-inspired saccadic behaviors. Scene saliency is determined by measuring low-level static scene information, motion, and object prior knowledge. Towards the extracted saliency spots, the designed robotic head is able to turn gazes in a saccadic manner while obeying eye–head coordination laws with the proposed control scheme. The results of the simulation study and actual applications show the effectiveness of the proposed method in discovering of scene saliency and human-like head motion. The proposed techniques could possibly be applied to social robots to improve social sense and user experience in human–robot interaction.