Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

北京火车站抗震鉴定与加固技术

北京火车站是首都重要的标志性建筑之一 ,195 9年建成 ,当时按 7度设防考虑 ,存在着许多不符合抗震要求的问题 ,一些设施也明显不能满足现代使用功能要求。北京火车站抗震加固与改造设计项目组 ,运用多种先进的加固手段 ,在保持原建筑外貌不变的前提下 ,实现了抗震能力和改善使用功能的协调 ,取得了大型公共建筑加固改造的新经验     

Cloning and expression analysis of a novel salicylate suppressible gene, Hs-CUL-3, a member of cullin/Cdc53 family

By using a mRNA differential display technique to search for salicylate suppressible genes, we identified a cDNA in human foreskin fibroblasts, which by GenBankTM DNA data base search shows sequence homology to the recently reported cullin/Cdc53 (CUL) family genes, especially CUL-3. We have cloned the full-length human CUL-3 (Hs-CUL-3) cDNA. It encodes a 768-amino acid polypeptide and has a predicted molecular weight of 88,939. The amino acid sequence of Hs-CUL-3 shows 46% homology to that of its Caenorhabditis elegans ortholog, Ce-CUL-3, and 27 and 23% to that of Hs-CUL-1 and Hs-CUL-2, respectively. Northern blot analysis showed that phorbol 12-myristate 13-acetate increased the expression of Hs-CUL-3 mRNA in a concentration- and time-dependent manner, and this increase was inhibited by sodium salicylate. Hs-CUL-3 widely expressed in human tissues and its expression in cultured COLO205 colon cancer cells was increased when compared with that in normal colon cells. It is likely that Hs-CUL-3 is involved in cell proliferation control.     

正交曲线坐标下三维代数应力通量模型

针对弯曲及不规则明渠的水动力及物质输运特性，本文建立了曲线坐标系下的三维代数应力通量数学模型，对平面上弯曲及不规则复杂边界情形，采用Poisson方程进行正交曲线坐标变换，各向异性的湍流代数应力通量模型被引用于本文的模拟计算中，以体现复杂边界条件引起的水动力及物质输运特性的变化。通过180度强弯曲明渠水槽及贵溪电厂不规则边界河段物理模型试验两个实例计算表明，实测值与计算吻合良好，效果令人满意。     

基于偏振光干涉仪的Interleaver解复用器实验研究

为实现更窄信道间隔的密集波分复用 ,提出了一种基于偏振光干涉仪的新型Interleaver解复用器 ,分析了结构组成与基本工作原理 ,对其进行了初步的测试实验 ,该器件所分开的DWDM系统两组波长功率均衡 ,隔离度分别为 1 0 6dB和 1 4 6 4dB ,- 1dB带宽分别为 0 7nm和 0 4nm。     

取代二苯多烯和取代聚二乙炔的三阶非线性光学性质

为了设计新的具有较高非线性极化率和光损耗小的有机非线性光学（ＮＬＯ）材料，需要了解不同的有机结构对分子非线性的影响。在此基础之上，建议用平行对比的方法来近似估算取代二苯多烯和聚二乙炔（ＰＤＡ）的三阶非线性光学极化率。     

Structural evolution of matrix phase for liquid phase sintered 93W-4.9Ni-2.1Fe

The structure of the matrix of a two phase heavy alloy, 93W-4.9Ni-2.1Fe (wt%), was characterized. The matrix phase was not the expected face centred cubic Ni-Fe-W solid solution with a large grain size reported in the literature. Instead, an amorphous phase containing fine grained crystals as well as intermetallic compounds having different compositions were found. The partition of tungsten from the matrix toward the tungsten phase resulted in formation of different phases in the matrix. Under furnace cooling, the matrix phase was composed of an amorphous phase for the matrix phase remote from the tungsten grain-matrix interfaces, and a strained FeNi intermetallic phase near the interfaces. For specimens solution treated at temperatures between 1000–1400 °C followed by water quenching, an intermetallic phase rich in tungsten, (Ni, Fe) W, evolved and surrounded the tungsten grains in clusters. The relative abundance of this intermetallic phase was highest for a solution treatment temperature of 1400 °C, indicating that the formation of this phase was a result of supersaturation of tungsten in the matrix phase and retarded partition of tungsten from the matrix phase to tungsten grains under a rapid cooling condition.     

海洋丝状真菌转化石油烃的研究

研究从湄洲湾海域分离的4株丝状真菌MF1，MF2，MF3，MF4的生长特性及去除油污的过程，观察在温度26℃，初始油浓度在3g/l,培养12d的过程中培养液的变化，分析培养液的pH值及原油的去除率与时间的关系，结果表明，丝状真菌去除原油的[过程是生物吸附与生物降解相结合的生物转化过程，比较革兰氏阴性细菌与丝状真菌细胞壁组成，结构，得出海洋微生物的脱油作用与其细胞壁有直接的关系。     

Achieving fair service with a hybrid scheduling scheme for CICQ switches

Providing performance guarantees for arriving traffic flows has become an important measure for today’s routing and switching systems. However, none of current scheduling algorithms built on CICQ (combined input and cross-point buffered) switches can provide flow level performance guarantees. Aiming at meeting this requirement, the feasibility of implementing flow level scheduling is discussed thoroughly. Then, based on the discussion, it comes up with a hybrid and stratified fair scheduling (HSFS) scheme, which is hierarchical and hybrid, for CICQ switches. With HSFS, each input port and output port can schedule variable length packets independently with a complexity of O(1). Theoretical analysis show that HSFS can provide delay bound, service rate and fair performance guarantees without speedup. Finally, we implement HSFS in SPES (switch performance evaluation system) to verify the analytical results.     

CMS环境下基于智能优化算法的单元间布局问题研究*

研究了单元制造系统(CMS)设计中单元间布局设计问题,从单元制造系统的实际出发,提出了一种基于割树(Slicing-tree)的单元间布局设计模型.该模型考虑了单元形状约束、单元I/O点位置优化等诸因素对布局结果的影响.针对基于割树的描述形式,采用遗传算法求解,提出了一种新的割树编码方案,克服了以往编码方案易产生非法子串、不能覆盖整个解空间以及实现困难等缺点.计算结果表明,该算法是有效的、可行的.