我国3～12岁儿童家长食品安全知识现状及其影响因素分析

了解我国儿童家长的家庭食品安全知识知晓情况及其影响因素，对开展精准食品安全宣教，减少家庭食源性疾病具有积极意义。本研究在7个城市的13 923名3～12岁儿童家长中开展问卷调查，收集基本信息、家庭食品安全知识知晓情况及需求。家长家庭食品安全知识平均得分为18.6分(总分29分)，及格率为68.7%。易错知识点包括熟食室温存储时间、食品保质期、易引起中毒的食物以及食品贮存环境等。多因素logistics回归分析显示:家长家庭食品安全知识及格率受地区、文化程度、职业、家长类型、是否关注食品安全、孩子是否讲过食品安全知识以及是否阅读孩子带回来资料的影响。家长最关心的前三位内容为滥用食品添加剂(84.9%)、卫生状况不合格(82.9%)、农药/药物残留(82.7%)。受家长信任的信息来源主要为电视/广播/广告(76.1%)、书籍/报纸/期刊(70.4%)、微博/微信等新媒体(57.7%)。家长的家庭食品安全知识仍存在短板，需利用传统媒体和新媒体结合的方式以及小手牵大手形式开展精准专题宣传，并特别关注文化程度低，从事食品行业的家长以及孩子父亲和保姆。     

Defocusing image to pattern contact holes using attenuated phase shift masks

The patterning of contact holes by selecting out-of-focus image plane (defocus) using attenuated phase shift masks (APSM) has been studied. Defocus is found to enhance the image modulation at low partial coherence for contact holes with negative local average of mask function. Semi-dense holes up to 130 nm in 8% APSM have been printed by 0.5 μm defocus at a partial coherence of 0.31 using KrF scanner with highest numerical aperture of 0.68. However, these holes were closed with in-focus imaging. Defocus is also found to be beneficial for patterning the pitches that have extensive side lobes with in-focus imaging.     

Adaptive motion control using neural network approximations

In this paper, we present a new adaptive technique for tracking control of mechanical systems in the presence of friction and periodic disturbances. Radial Basis Functions (RBFs) are used to compensate for the effects of nonlinearly occurring parameters in the friction and periodic disturbance model. Theoretical analysis, such as stability and transient performance, is provided. Furthermore, the performance of the adaptive RBF controller and its non-adaptive counterpart are compared.     

Topology preservation of template-based 6-subiteration reduction operations

Generally, a reduction operation (e.g., thinning and shrinking) on 3D binary images can be represented as a set of reduction templates where every object voxel of the image satisfying any template is turned to a background voxel. Generally, it is rather difficult, error-prone and time-consuming for verifying the topological soundness of a 3D parallel reduction operation. This paper proposes sufficient conditions of time complexity O(n) for verifying the topological soundness of 3D parallel 6-subiteration reduction operations of n templates where such a kind of 3D reduction operations is performed alternatively from the six orthogonal directions to turn object voxels to background voxels. By such sufficient conditions, the topology soundness of a 3D 6-subiteration parallel reduction operation can be verified by checking each and every of its templates.     

Control of discrete time nonlinear systems with a time-varying structure

In this paper, we present a control methodology for a class of discrete time nonlinear systems that depend on a possibly exogenous scheduling variable. This class of systems consists of an interpolation of nonlinear dynamic equations in strict feedback form, and it may represent systems with a time-varying nonlinear structure. Moreover, this class of systems is able to represent some cases of gain scheduling control, Takagi-Sugeno fuzzy systems, as well as input-output realizations of nonlinear systems which are approximated via localized linearizations. We present two control theorems, one using what we call a “global” approach (akin to traditional backstepping), and a “local” approach, our main result, where backstepping is again used but the control law is an interpolation of local control terms. An aircraft wing rock regulation problem with varying angle of attack is used to illustrate and compare the two approaches.     

Stability robustness of networked control systems with respect to packet loss

This paper is concerned with stability analysis of discrete-time networked control systems over a communication channel subject to packet loss whose behavior is modeled by an i.i.d Bernoulli process with a packet dropping probability bounded by a constant. A necessary and sufficient condition for stability is obtained. A packet dropping margin is introduced as a measure of stability robustness of a system against packet dropping, and a formula for it is derived. A design method is proposed for achieving a large margin subject to a constraint that the system has a set of prescribed nominal closed-loop poles.     

Decentralized adaptive coordinated control of multiple robot arms without using a force sensor

This paper presents a distributed adaptive coordinated control method for multiple robot arms grasping a common object. The cases of rigid contact and rolling contact are analyzed. In the proposed controller, the dynamic parameters of both object and robot arms are estimated adaptively. The desired motions of the robot arms are generated by an estimated object reference model. The control method requires only the measurements of the positions and velocities of the object and robot arms, but not the measurements of forces and moments at contact points. The asymptotic convergence of trajectory is proven by the Lyapunov-like Lemma. Experiments involving two robot arms handling a common object are shown.     

Controlled linear system with delayed relay output under impulse random disturbances

The paper is devoted to the first order delayed linear system with relay output controlled by the proportional-integral (PI) regulator. The deterministic system exhibits stable oscillations, and, since the system itself is stable, it can be suitable to switch off the controller if there are no disturbances during a long time interval. In the present work, the random disturbances are modelled by a Poisson stream of impulses, and the goal is to determine the instants of switching on (off) of the PI controller. After several assumptions and quantization of the time axis, we construct the new optimal control problem which is successfully solved with the help of the dynamic programming approach.     

Solving the small sample size problem in face recognition using generalized discriminant analysis

The goal of face recognition is to distinguish persons via their facial images. Each person's images form a cluster, and a new image is recognized by assigning it to the correct cluster. Since the images are very high-dimensional, it is necessary to reduce their dimension. Linear discriminant analysis (LDA) has been shown to be effective at dimension reduction while preserving the cluster structure of the data. It is classically defined as an optimization problem involving covariance matrices that represent the scatter within and between clusters. The requirement that one of these matrices be nonsingular restricts its application to datasets in which the dimension of the data does not exceed the sample size. For face recognition, however, the dimension typically exceeds the number of images in the database, resulting in what is referred to as the small sample size problem. Recently, the applicability of LDA has been extended by using the generalized singular value decomposition (GSVD) to circumvent the nonsingularity requirement, thus making LDA directly applicable to face recognition data. Our experiments confirm that LDA/GSVD solves the small sample size problem very effectively as compared with other current methods.