Conductive resilient graphene aerogel via magnesiothermic reduction of graphene oxide assemblies

Graphene aerogels are desirable for energy storage and conversion, as catalysis supports, and as adsorbents for environmental remediation. To produce graphene aerogels with low density, while maintaining high electrical conductivity and strong mechanic performance, we synthesized graphene aerogels by the magnesiothermic reduction of a freeze-dried graphene oxide (GO) self-assembly and subsequent etching of the formed MgO in acid solution. The reduced graphene oxide (rGO) aerogel samples exhibited densities as low as 1.1 mg·cm^?3. The rGO aerogel was very resilient, exhibiting full recoveryeven after being compressed by strains of up to 80%; its elastic modulus (E) scaled with density (ρ) as E～ρ². The rGO aerogels also exhibited high conductivities (e.g., 27.7 S·m^?1 at 3.6 mg·cm^?3) and outperformed many rGO aerogels fabricated by other reduction processes. Such outstanding properties were ascribed to the microstructures inherited from the freeze-dried GO self-assembly and the magnesiothermic reduction process.

Open image in new window

     

Functional Characteristics of Oleogel Prepared from Sunflower Oil with β-Sitosterol and Stearic Acid

β‐Sitosterol (Sit) and stearic acid (SA) were combined at varying ratios (w/w) and added to sunflower oil (SFO) at the concentration of 20 g/100 g oil for preparing edible fat‐like oleogel. The oleogel was characterized using an optical microscope, Fourier transform infrared spectroscopy (FTIR), X‐ray diffractometer (XRD), differential scanning calorimeter, and texture analyzer. The oil‐binding capacity, melting temperature, and firmness of the oleogel increased with the increase in the amount of SA in the gelator combination (Sit:SA, w/w). The microscopic analysis showed that the gel network formed based on the crystallization and self‐organization of gelator molecules, and both gelators showed an independent crystalline behavior in the oleogel. In addition, the FTIR spectra showed that the gel network formed via physical entanglements and was stabilized by non‐covalent interactions such as hydrogen bonding. Furthermore, XRD diffraction patterns indicated high lateral packing of molecular layers in oleogel prepared with the Sit and SA combination compared with oleogel prepared with a single gelator. On the other hand, for studying the effect of varying concentrations of gelator combinations, the Sit3:SA2 (w/w) combination was added to SFO at concentrations of 10, 15, 20, 25, and 30 g/100 g oil. Specific characteristics such as the oil‐binding capacity and firmness of the oleogel improved as the concentration of the gelator combination (Sit3:SA2) increased from 10 up to 30 g/100 g oil. Therefore, it can be concluded that the saturated fat alternative oleogel can be prepared from SFO with a specific Sit and SA combination ratio and concentration.     

Sulfatides Primarily Exist in the Substantia Nigra Region of Mouse Brain Tissue

Lipid distribution in the brain is important for many biological functions and has been associated with some brain diseases. The aim of this study was to investigate lipid distribution in different regions of brain tissue in mice. To this end, substantia nigra (SN), caudate putamen (CPu), hippocampus (Hip), hypothalamus (Hyp), and cortex (Cx) tissues of mice were analyzed using direct infusion nanoelectrospray‐ion trap mass spectrometry and multivariate analyses. The SN, CPu, Hip, Hyp, and Cx groups showed clear differences in lipid distribution using principal component analysis and a partial least‐squares discriminant analysis score plot, and lipid levels were significantly different in different brain regions. In particular, sulfatides were mainly distributed in the SN region. Our results could be used to help understand the functions and mechanisms of lipids in various brain diseases.     

A macroscopically nondestructive method for characterizing surface mechanical properties of polymeric coatings under accelerated weathering

The surface of coatings and plastics is the first target in any degradation process initiated by ultraviolet (UV) radiation or mechanical stress (via scratch and abrasion). Surface damage can lead to changes in optical, morphological, and mechanical properties and can result in pathways for ingress of moisture and corrosive agents. Current test methods for monitoring performance of protective coatings focus on chemical properties and optical properties, such as color and gloss measurements, or invasive tests such as abrasion and cross-cut adhesion. In this study, a macroscopically nondestructive performance protocol using nanoindentation metrology via a well-controlled scratch test was applied to evaluate the scratch resistance and monitor the surface mechanical property changes in a protective coating under accelerated weathering. Polyurethane (PU) coatings with different polyol compositions were chosen for this study. Coating specimens were exposed to high-intensity UV radiation at 55°C and 75% RH conditions. Exposed specimens were removed at specified UV exposure times for surface modulus/hardness and scratch resistance characterization via nanoindentation and scratch test. The effect of polyol type and UV radiation dose on the scratch damage (scratch morphology) was investigated and correlated with the surface hardness and modulus of the materials.