SMC composites waste management as reinforcing fillers in polypropylene by combination of mechanical and chemical recycling processes

A new process of management of waste of composite materials from Sheet Moulding Compounds (SMC), as reinforcing fillers for thermoplastic materials, including both mechanical and chemical processes is proposed in this paper. Communited SMC being composed of coated glass fibres intimately mixed with calcium carbonate powder, their reinforcing power is low. First, the fibrous part was increased by partial dissolution of calcium carbonate present in the crushed products SMC. Second, a process of partial solvolysis was developed aiming at strong increasing the interfacial mechanical properties by functionalising of SMC load incorporated into polypropylene/grafted maleic anhydride polypropylene (PP/PP_gma). At this effect, we investigated a treatment with a hot triamine (diethylenetriamine, DETA) in order to create a functionalisation, after scission of the bond ester of unsaturated polyester, as bridging amino-succinimide.The effect of this recycling way by partial solvolysis was checked from the mechanical properties of the resulting reinforced PP/PP_gma material: Although a lower of Young modulus, better yield stress and especially resilience were observed.     

Recognizing the importance of scale in the ecology and management of riverine fish

Processes affecting fish populations range in scale from local to global. Fish response is also scale‐dependent, with some activities varying locally while others depend on large‐scale connectivity within or between watersheds. These issues are still only partly recognized, with large‐scale research often affected by non‐independent sampling, weak inference, poor model testing or model over‐extrapolation. Available multi‐scale studies can reach different conclusions about factors affecting fishes from local studies, but results vary between examples. Potential explanations are (i) effects on fishes are context‐dependent; (ii) different species or life‐stages are limited in different ways; (iii) multi‐scale studies are too few for generalization. We advocate improved use of geostatistical tools to guide sampling or interpret the spatial extent of management problems, and we illustrate this using brown trout in Welsh streams. Our strongest recommendation is that fish ecologists recognize the importance of interactions across scales in quantifying effects on fishes so that management decisions can be better based on evidence rather than judgement or extrapolation. Copyright © 2006 John Wiley & Sons, Ltd.     

Development of Covalent Chitosan-Polyethylenimine Derivatives as Gene Delivery Vehicle: Synthesis,Characterization, and Evaluation

There is an increasing interest in cationic polymers as important constituents of non-viral gene delivery vectors. In the present study, we developed a versatile synthetic route for the production of covalent polymeric conjugates consisting of water-soluble depolymerized chitosan (dCS; M_W 6–9 kDa) and low molecular weight polyethylenimine (PEI; 2.5 kDa linear, 1.8 kDa branched). dCS-PEI derivatives were evaluated based on their physicochemical properties, including purity, covalent bonding, solubility in aqueous media, ability for DNA condensation, and colloidal stability of the resulting polyplexes. They were complexed with non-integrating DNA vectors coding for reporter genes by simple admixing and assessed in vitro using liver-derived HuH-7 cells for their transfection efficiency and cytotoxicity. Using a rational screening cascade, a lead compound was selected (dCS-Suc-LPEI-14) displaying the best balance of biocompatibility, cytotoxicity, and transfection efficiency. Scale-up and in vivo evaluation in wild-type mice allowed for a direct comparison with a commercially available non-viral delivery vector (in vivo-jetPEI). Hepatic expression of the reporter gene luciferase resulted in liver-specific bioluminescence, upon intrabiliary infusion of the chitosan-based polyplexes, which exceeded the signal of the in vivo jetPEI reference formulation by a factor of 10. We conclude that the novel chitosan-derivative dCS-Suc-LPEI-14 shows promise and potential as an efficient polymeric conjugate for non-viral in vivo gene therapy.     

Parallelised production of fine and calibrated emulsions by coupling flow-focusing technique and partial wetting phenomenon

The capacity of microfluidic technology to fabricate monodisperse emulsion droplets is well established. Parallelisation of droplet production is a prerequisite for using such an approach for making high-quality materials for either fundamental or industrial applications where product quantity matters. Here, we investigate the emulsification efficiency of parallelised drop generators based on a flow-focusing geometry when incorporating the role of partial wetting in order to make emulsion droplets with a diameter below 10 μm. Confinement intrinsically encountered in microsystems intensifies the role played by interfaces between liquids and solids. We thus take advantage of partial wetting to enhance the maximum confinement accessible due to liquid flow focusing. We compare the performances brought by partial wetting to more established routes such as step emulsification. We show that the step configuration and the partial wetting regime are both well suited for being parallelised and thus open the way to the production of fine and calibrated emulsions for further applications. Finally, this new route of emulsification that exploits partial wetting between the fluids and the channel walls opens possibilities to the formation of substantially smaller droplets, as required in many fields of application.     

Gelatin supports with immobilized laccase as sustainable biocatalysts for water treatment

Millimeter-size beads of gelatin are manufactured by dripping process to give enzyme supports qualified for micropollutants biodegradation in alternative wastewater treatment. The bead diameter is dependent on the tip diameter, the gelatin solution viscosity and the swelling of polymer chains in the collecting bath. Chemical crosslinking was performed with glutaraldehyde using optimal concentration to give mechanical and thermal properties suitable for application in stirred reactor in aqueous medium. Laccases from Trametes versicolor are grafted on the gelatin beads with glutaraldehyde. Sixty percentage of the initial enzymatic activity, evaluated by the oxidation of 2′-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)diammonium salt (ABTS) is maintained after 10 successive cycles of reaction. Thermal stability at 60°C of immobilized biocatalysts is improved when compared to free enzymes (45% vs 10% of relative activity after 6 h of incubation). The simplicity of the procedure to form gelatin beads and their properties make them promising bio-based and biodegradable support for enzyme immobilization.     

Multimodal focus attention and stress detection and feedback in an augmented driver simulator

This paper presents a driver simulator, which takes into account the information about the user’s state of mind (level of attention, fatigue state, stress state). The user’s state of mind analysis is based on video data and biological signals. Facial movements such as eyes blinking, yawning, head rotations, etc., are detected on video data: they are used in order to evaluate the fatigue and the attention level of the driver. The user’s electrocardiogram and galvanic skin response are recorded and analyzed in order to evaluate the stress level of the driver. A driver simulator software is modified so that the system is able to appropriately react to these critical situations of fatigue and stress: some audio and visual messages are sent to the driver, wheel vibrations are generated and the driver is supposed to react to the alert messages. A multi-threaded system is proposed to support multi-messages sent by the different modalities. Strategies for data fusion and fission are also provided. Some of these components are integrated within the first prototype of OpenInterface: the multimodal similar platform.     

Time-local formulation and identification of implicit Volterra models by use of diffusive representation

We present a time-continuous identification method for nonlinear dynamic Volterra models of the form HX=f(u,X)+v with H, a causal convolution operator. It is mainly based on a suitable parameterization of H deduced from the so-called diffusive representation, which is devoted to state representations of integral operators. Following this approach, the complex dynamic nature of H can be summarized by a few numerical parameters on which the identification of the dynamic part of the model will focus. The method is validated on a physical numerical example.     

A multiphase compressible model for the simulation of multiphase flows

A compressible model able to manage incompressible two-phase flows as well as compressible motions is proposed. After a presentation of the multiphase compressible concept, the new model and related numerical methods are detailed on fixed structured grids. The presented model is a 1-fluid model with a reformulated mass conservation equation which takes into account the effects of compressibility. The coupling between pressure and flow velocity is ensured by introducing mass conservation terms in the momentum and energy equations. The numerical model is then validated with four test cases involving the compression of an air bubble by water, the liquid injection in a closed cavity filled with air, a bubble subjected to an ultrasound field and finally the oscillations of a deformed air bubble in melted steel. The numerical results are compared with analytical results and convergence orders in space are provided.